C $Header: /u/gcmpack/MITgcm/pkg/fizhi/step_fizhi_corr.F,v 1.13 2004/10/22 14:52:14 molod Exp $
C $Name: $
#include "FIZHI_OPTIONS.h"
subroutine STEP_FIZHI_CORR (myTime, myIter, myThid)
c----------------------------------------------------------------------
c Subroutine step_fizhi_corr - 'Wrapper' routine to advance
c the physics state and make the new value.
c At this point, increment with the "correction term"
c which includes the dynamics tendency and the integral
c constraint to enforce agreement with the dynamics state
c Also: Set up "bi, bj loop" and some timers and clocks here.
c
c Call:phys2dyn (4) (interpolate physics state to dynamics grid
c for use in the correction terms)
c AtoC (convert physics state on dynamics grid to C-Grid)
c CtoA (convert correction term on dynamics grid to A-Grid)
c dyn2phys (4) (interpolate A-Grid correction term to physics grid)
c step_physics (advance physics state by correction term)
c-----------------------------------------------------------------------
implicit none
#include "SIZE.h"
#include "GRID.h"
#include "fizhi_SIZE.h"
#include "fizhi_land_SIZE.h"
#include "DYNVARS.h"
#include "fizhi_coms.h"
#include "gridalt_mapping.h"
#include "EEPARAMS.h"
#include "SURFACE.h"
integer myIter, myThid
_RL myTime
c pe on dynamics and physics grid refers to bottom edge
_RL pephy(1-OLx:sNx+Olx,1-Oly:sNy+Oly,Nrphys+1,nSx,nSy)
_RL pedyn(1-Olx:sNx+Olx,1-Oly:sNy+Oly,Nr+1,nSx,nSy)
_RL windphy(1-Olx:sNx+Olx,1-Oly:sNy+Oly,Nrphys,nSx,nSy)
_RL udyntemp(1-Olx:sNx+Olx,1-Oly:sNy+Oly,Nr,nSx,nSy)
_RL vdyntemp(1-Olx:sNx+Olx,1-Oly:sNy+Oly,Nr,nSx,nSy)
_RL thdyntemp(1-Olx:sNx+Olx,1-Oly:sNy+Oly,Nr,nSx,nSy)
_RL sdyntemp(1-Olx:sNx+Olx,1-Oly:sNy+Oly,Nr,nSx,nSy)
_RL uphytemp(1-Olx:sNx+Olx,1-Oly:sNy+Oly,Nrphys,nSx,nSy)
_RL vphytemp(1-Olx:sNx+Olx,1-Oly:sNy+Oly,Nrphys,nSx,nSy)
_RL thphytemp(1-Olx:sNx+Olx,1-Oly:sNy+Oly,Nrphys,nSx,nSy)
_RL sphytemp(1-Olx:sNx+Olx,1-Oly:sNy+Oly,Nrphys,nSx,nSy)
_RL tempphy(1-Olx:sNx+Olx,1-Oly:sNy+Oly,Nrphys,nSx,nSy)
integer i, j, L, Lbotij, bi, bj
integer im1, im2, jm1, jm2, idim1, idim2, jdim1, jdim2
_RL dt
_RL tempij(sNx,sNy)
im1 = 1-OLx
im2 = sNx+OLx
jm1 = 1-OLy
jm2 = sNy+OLy
idim1 = 1
idim2 = sNx
jdim1 = 1
jdim2 = sNy
dt = 1.
do bj = myByLo(myThid), myByHi(myThid)
do bi = myBxLo(myThid), myBxHi(myThid)
C Construct Pressures on physics and dynamics grids
do j = 1,sNy
do i = 1,sNx
do L = 1,Nr
pedyn(i,j,L,bi,bj) = 0.
enddo
enddo
enddo
do j = 1,sNy
do i = 1,sNx
Lbotij = ksurfC(i,j,bi,bj)
if(Lbotij.ne.0.)
. pedyn(i,j,Lbotij,bi,bj) = Ro_surf(i,j,bi,bj) + etaH(i,j,bi,bj)
enddo
enddo
do j = 1,sNy
do i = 1,sNx
Lbotij = ksurfC(i,j,bi,bj)
do L = Lbotij+1,Nr+1
pedyn(i,j,L,bi,bj) = pedyn(i,j,L-1,bi,bj) -
. drF(L-1)*hfacC(i,j,L-1,bi,bj)
enddo
c Do not use a zero field as the top edge pressure for interpolation
if(pedyn(i,j,Nr+1,bi,bj).lt.1.e-5)
. pedyn(i,j,Nr+1,bi,bj) = 1.e-5
enddo
enddo
do j = 1,sNy
do i = 1,sNx
pephy(i,j,1,bi,bj)=Ro_surf(i,j,bi,bj) + etaH(i,j,bi,bj)
do L = 2,Nrphys+1
pephy(i,j,L,bi,bj)=pephy(i,j,L-1,bi,bj)-dpphys(i,j,L-1,bi,bj)
enddo
c Do not use a zero field as the top edge pressure for interpolation
if(pephy(i,j,Nrphys+1,bi,bj).lt.1.e-5)
. pephy(i,j,Nrphys+1,bi,bj) = 1.e-5
enddo
enddo
c
c Create a wind magnitude field on the physics grid -
do L = 1,Nrphys
do j = 1,sNy
do i = 1,sNx
windphy(i,j,L,bi,bj) = sqrt(uphy(i,j,L,bi,bj)*uphy(i,j,L,bi,bj)
. + vphy(i,j,L,bi,bj)*vphy(i,j,L,bi,bj))
enddo
enddo
enddo
enddo
enddo
CALL TIMER_START('PHYS2DYN [STEP_FIZHI_CORR]',mythid)
do bj = myByLo(myThid), myByHi(myThid)
do bi = myBxLo(myThid), myBxHi(myThid)
c Compute correction term (new dyn state-phys state to dyn) on physics grid:
c First: interp physics state to dynamics grid
C Note: physics field levels are numbered top down - need bottom up
do L = 1,Nrphys
do j = 1,sNy
do i = 1,sNx
tempphy(i,j,Nrphys+1-L,bi,bj) = uphy(i,j,L,bi,bj)
enddo
enddo
enddo
call PHYS2DYN(tempphy,pephy,im1,im2,jm1,jm2,Nrphys,Nsx,Nsy,
. 1,sNx,1,sNy,bi,bj,pedyn,ksurfC,Nr,nlperdyn,udyntemp)
do L = 1,Nrphys
do j = 1,sNy
do i = 1,sNx
tempphy(i,j,Nrphys+1-L,bi,bj) = vphy(i,j,L,bi,bj)
enddo
enddo
enddo
call PHYS2DYN(tempphy,pephy,im1,im2,jm1,jm2,Nrphys,Nsx,Nsy,
. 1,sNx,1,sNy,bi,bj,pedyn,ksurfC,Nr,nlperdyn,vdyntemp)
do L = 1,Nrphys
do j = 1,sNy
do i = 1,sNx
tempphy(i,j,Nrphys+1-L,bi,bj) = thphy(i,j,L,bi,bj)
enddo
enddo
enddo
call PHYS2DYN(tempphy,pephy,im1,im2,jm1,jm2,Nrphys,Nsx,Nsy,
. 1,sNx,1,sNy,bi,bj,pedyn,ksurfC,Nr,nlperdyn,thdyntemp)
do L = 1,Nrphys
do j = 1,sNy
do i = 1,sNx
tempphy(i,j,Nrphys+1-L,bi,bj) = sphy(i,j,L,bi,bj)
enddo
enddo
enddo
call PHYS2DYN(tempphy,pephy,im1,im2,jm1,jm2,Nrphys,Nsx,Nsy,
. 1,sNx,1,sNy,bi,bj,pedyn,ksurfC,Nr,nlperdyn,sdyntemp)
enddo
enddo
CALL TIMER_STOP('PHYS2DYN [STEP_FIZHI_CORR]',mythid)
c Second: Convert physics state on dynamics grid to C-Grid
CALL TIMER_START('ATOC [STEP_FIZHI_CORR]',mythid)
call ATOC(myThid,udyntemp,vdyntemp,maskC,im1,im2,jm1,jm2,Nr,
. Nsx,Nsy,1,sNx,1,sNy,udyntemp,vdyntemp)
CALL TIMER_STOP('ATOC [STEP_FIZHI_CORR]',mythid)
c Third: Subtract Phys state on dyn. grid from new dynamics state
do bj = myByLo(myThid), myByHi(myThid)
do bi = myBxLo(myThid), myBxHi(myThid)
do L = 1,Nr
do j = jdim1,jdim2
do i = idim1,idim2
udyntemp(i,j,L,bi,bj)=uvel(i,j,L,bi,bj)-udyntemp(i,j,L,bi,bj)
vdyntemp(i,j,L,bi,bj)=vvel(i,j,L,bi,bj)-vdyntemp(i,j,L,bi,bj)
thdyntemp(i,j,L,bi,bj)=theta(i,j,L,bi,bj)-thdyntemp(i,j,L,bi,bj)
sdyntemp(i,j,L,bi,bj)=salt(i,j,L,bi,bj)-sdyntemp(i,j,L,bi,bj)
enddo
enddo
enddo
enddo
enddo
c Fourth: Convert correction terms to A-Grid
CALL TIMER_START('CTOA [STEP_FIZHI_CORR]',mythid)
call CTOA(myThid,udyntemp,vdyntemp,maskW,maskS,im1,im2,jm1,jm2,
. Nr,Nsx,Nsy,1,sNx,1,sNy,udyntemp,vdyntemp)
CALL TIMER_STOP('CTOA [STEP_FIZHI_CORR]',mythid)
c Fifth: Interpolate correction terms to physics grid
CALL TIMER_START('DYN2PHYS [STEP_FIZHI_CORR]',mythid)
do bj = myByLo(myThid), myByHi(myThid)
do bi = myBxLo(myThid), myBxHi(myThid)
call DYN2PHYS(udyntemp,pedyn,im1,im2,jm1,jm2,Nr,Nsx,Nsy,1,sNx,
. 1,sNy,bi,bj,windphy,pephy,ksurfC,Nrphys,nlperdyn,1,tempphy)
C Note: correction term is now bottom up - needed in top down arrays
do L = 1,Nrphys
do j = 1,sNy
do i = 1,sNx
uphytemp(i,j,Nrphys+1-L,bi,bj) = tempphy(i,j,L,bi,bj)
enddo
enddo
enddo
call DYN2PHYS(vdyntemp,pedyn,im1,im2,jm1,jm2,Nr,Nsx,Nsy,1,sNx,
. 1,sNy,bi,bj,windphy,pephy,ksurfC,Nrphys,nlperdyn,1,tempphy)
do L = 1,Nrphys
do j = 1,sNy
do i = 1,sNx
vphytemp(i,j,Nrphys+1-L,bi,bj) = tempphy(i,j,L,bi,bj)
enddo
enddo
enddo
call DYN2PHYS(thdyntemp,pedyn,im1,im2,jm1,jm2,Nr,Nsx,Nsy,1,sNx,
. 1,sNy,bi,bj,windphy,pephy,ksurfC,Nrphys,nlperdyn,0,tempphy)
do L = 1,Nrphys
do j = 1,sNy
do i = 1,sNx
thphytemp(i,j,Nrphys+1-L,bi,bj) = tempphy(i,j,L,bi,bj)
enddo
enddo
enddo
call DYN2PHYS(sdyntemp,pedyn,im1,im2,jm1,jm2,Nr,Nsx,Nsy,1,sNx,
. 1,sNy,bi,bj,windphy,pephy,ksurfC,Nrphys,nlperdyn,0,tempphy)
do L = 1,Nrphys
do j = 1,sNy
do i = 1,sNx
sphytemp(i,j,Nrphys+1-L,bi,bj) = tempphy(i,j,L,bi,bj)
enddo
enddo
enddo
enddo
enddo
CALL TIMER_STOP('DYN2PHYS [STEP_FIZHI_CORR]',mythid)
c Last: Increment physics state by the correction term
do bj = myByLo(myThid), myByHi(myThid)
do bi = myBxLo(myThid), myBxHi(myThid)
call STEP_PHYSICS(uphy,vphy,thphy,sphy,dt,im1,im2,jm1,jm2,
. Nrphys,Nsx,Nsy,1,sNx,1,sNy,bi,bj,
. uphytemp,vphytemp,thphytemp,sphytemp)
if(2.eq.1 )then
print *,' In step fizhi corr, new fizhi fields ',bi,' dt= ',dt
do L = 1,Nrphys
do j = jdim1,jdim2
do i = idim1,idim2
tempij(i,j) = uphy(i,j,L,bi,bj)
enddo
enddo
c print *,' uphy at level ',l,' ',tempij
enddo
do L = 1,Nrphys
do j = jdim1,jdim2
do i = idim1,idim2
tempij(i,j) = vphy(i,j,L,bi,bj)
enddo
enddo
c print *,' vphy at level ',l,' ',tempij
enddo
do L = 1,Nrphys
do j = jdim1,jdim2
do i = idim1,idim2
tempij(i,j) = thphy(i,j,L,bi,bj)
enddo
enddo
print *,' thphy at level ',l,' ',tempij
enddo
do L = 1,Nrphys
do j = jdim1,jdim2
do i = idim1,idim2
tempij(i,j) = sphy(i,j,L,bi,bj)
enddo
enddo
print *,' sphy at level ',l,' ',tempij
enddo
endif
call QCHECK (im1,im2,jm1,jm2,Nrphys,Nsx,Nsy,idim1,idim2,
. jdim1,jdim2,bi,bj,dpphys,sphy)
if(2.eq.1 )then
print *,' In step fizhi corr after qcheck ',bi
do L = 1,Nrphys
do j = jdim1,jdim2
do i = idim1,idim2
tempij(i,j) = sphy(i,j,L,bi,bj)
enddo
enddo
print *,' sphy after qcheck at level ',l,' ',tempij
enddo
endif
enddo
enddo
return
end