Symbol Description Uses
ubarfile 27
udrifterrfile 5
udriftfile 5
umax 5
umin 15
uniformLin_PhiSurf Set to true to use a uniform Bo_surf in the 7
upwindShear use 1rst order upwind interp. (V.I., vertical advection) 9
upwindVorticity bias interpolation of vorticity in the Coriolis term 13
Urelaxobcsbound 12
Urelaxobcsinner 12
useAbsVorticity work with f+zeta in Coriolis terms 12
useAIM 27
useAnisotropicViscAGridMax Set to true to use Alistair's latest 11
useBulkForce 9
useCDscheme use CD-scheme to calculate Coriolis terms. 23
useCentralDiff 6
useConstantF Coriolis parameter set to f0 5
useCoriolis Flag which turns the coriolis terms on and off. 10
useCoupler 30
useCubedSphereExchange 68
usediagnostics 12
useEBM 9
useECCO 4
useEnergyConservingCoriolis 6
useExfCheckRange 5
useExfYearlyFields when set, automatically add extension 10
useFixedCEast 9
useFixedCWest 9
usefizhi 8
useFLT 11
useFullLeith Set to true to use full Leith viscosity (may be unstable 7
useGCHEM 17
useGCMwVel 5
useGGL90 19
useGMRedi 31
useGrdchk 6
usegridalt 4
useImportFW True => use the Imported Fresh Water flux fr cpl 10
useImportHFlx True => use the Imported HeatFlux from couler 8
useImportMxlD True => use Imported Mix.Layer Detph from coupler 6
useImportSIce True => use the Imported Sea-Ice mass as ice-loading 12
useImportSLP True => use the Imported Sea-level Pressure as 12
useImportSSS True => use the Imported SSS from coupler 6
useImportSST True => use the Imported SST from coupler 7
useImportTau True => use the Imported Wind-Stress from couler 7
useImportVsq True => use the Imported Surf. velocity^2 6
useJamartMomAdv Use wet-point method for V.I. non-linear term 7
useJamartWetPoints Use wet-point method for Coriolis (Jamart and Ozer, 1986) 9
useKPP 30
useLand 15
useMATRIX 16
useMNC 67
useMY82 18
useNHMTerms If TRUE use non-hydrostatic metric terms. 10
useOBCS 50
useOBCSbalance 5
useOBCSprescribe 8
useOBCSsponge 9
useOldFreezing use the old version (before checkpoint52a_pre, 2003-11-12) 6
useOPPS 9
useOrlanskiEast 14
useOrlanskiNorth 14
useOrlanskiSouth 14
useOrlanskiWest 14
usePickupBeforeC35 5
usePickupBeforeC54 9
usePP81 19
usePTRACERS 29
useRealFreshWaterFlux if True (=Natural BCS), treats P+R-E flux 28
useRunClock 9
useSBO 8
useSEAICE 19
useSHAP_FILT 11
useSingleCpuIO On SGI platforms, option globalFiles is either 14
useThSIce 27
useZONAL_FILT 14
using_ers 5
using_topex 6
usingCartesianGrid If TRUE grid generation will be in a cartesian 13
usingCurvilinearGrid 12
usingCylindricalGrid If TRUE grid generation will be Cylindrical 10
usingMPI 30
usingSphericalPolarGrid If TRUE grid generation will be in a 37
ustressconst 5
ustressfile 9
ustressperiod 7
ustressstartdate1 8
ustressstartdate2 8
UvelFile 4
uVelInitFile 14
uwind_errfile 8
uwindconst 5
uwindfile 9
uwindFile 10
UWindFile 6
uwindperiod 7
uwindstartdate1 7
uwindstartdate2 7