Symbol Description Uses
S_winton Winton salinity of ice [g/kg] 6
SadournyCoriolis for backward compatibility 4
salt0errfile 10
salt_addMass salinity of addMass array 11
salt_EvPrRn salinity of Rain & Evap. 18
SALT_PLUME_PARM01 2
salt_useDWNSLP true if Down-Sloping flow applies to salinity 6
saltAdvection Flag which turns advection of salinity on and off. 13
saltAdvScheme Salt. Horiz.advection scheme selector 27
saltClimFile File containing surface salt climataology used 16
saltDiffusion diffusion of salinity on/off (flag not used) 4
salterrfile 10
SaltFile 3
saltFluxFile File containing surface salt flux 12
saltForcing Flag which turns external forcing of salinity on 9
saltIce salinity of ice [g/kg] 10
saltImplVertAdv Turns on implicit vertical advection for Salinity 15
SaltPlumeCriterion 11
SaltPlumeSouthernOcean 5
saltQsFac reduction of sat. vapor pressure over salty water 6
saltRelaxFile 9
saltsat reduction of saturation vapor pressure over salt water 6
saltStepping Turns salinity equation time-stepping off 25
saltVertAdvScheme Salt. Vert. Advection scheme selector 12
sbarfile 38
sBeta Linear EOS haline contraction coefficient. 14
SBO_PARM01 2
sbo_taveFreq SBO time-averaging frequency (s) 7
scale_runoff 5
scalname 6
scatperiod 4
scatstartdate1 8
scatstartdate2 8
scatx_errfile 7
scatxdatfile 9
scaty_errfile 7
scatydatfile 9
SDALB 8
sdatfile 7
SEAICE_airTurnAngle 10
SEAICE_availHeatFrac 11
SEAICE_availHeatFracFrz 10
SEAICE_clamp_salt 5
SEAICE_clamp_theta 5
SEAICE_clipVelocities clip velocities to +/- 40cm/s 8
SEAICE_deltaTdyn 27
SEAICE_deltaTevp 22
SEAICE_deltaTtherm 75
SEAICE_drag 10
SEAICE_drag_south 11
SEAICE_dryIceAlb 8
SEAICE_dryIceAlb_south 9
SEAICE_drySnowAlb 8
SEAICE_drySnowAlb_south 9
SEAICE_dump_mnc write snap-shot output using MNC 8
SEAICE_dumpFreq 8
SEAICE_eccen 9
SEAICE_elasticParm 7
SEAICE_emissivity 9
SEAICE_EPS 19
SEAICE_EPS_SQ 16
SEAICE_evpDampC 8
SEAICE_evpTauRelax 10
SEAICE_freeze 8
SEAICE_gamma_t 10
SEAICE_gamma_t_frz 8
SEAICE_iceConduct 6
SEAICE_initialHEFF 6
SEAICE_latentIce 7
SEAICE_latentWater 7
SEAICE_maskRHS mask the RHS of the solver where there is no ice 6
SEAICE_mon_mnc write monitor to netcdf file 9
SEAICE_monFreq 7
SEAICE_no_slip apply no slip boundary conditions to seaice velocity 11
SEAICE_PARM01 2
SEAICE_PARM02 2
SEAICE_rhoAir 10
SEAICE_rhoIce 13
SEAICE_rhoSnow 10
SEAICE_salinity 7
SEAICE_sensHeat 9
SEAICE_shortwave 7
SEAICE_snowConduct 7
SEAICE_snowThick 7
SEAICE_strength 9
SEAICE_tave_mnc write TimeAverage output using MNC 8
SEAICE_taveFreq 10
SEAICE_waterAlbedo 7
SEAICE_waterDrag 16
SEAICE_waterDrag_south 17
SEAICE_waterTurnAngle 16
SEAICE_wetIceAlb 8
SEAICE_wetIceAlb_south 9
SEAICE_wetSnowAlb 8
SEAICE_wetSnowAlb_south 9
SEAICE_zetaMaxFac 8
SEAICE_zetaMin 10
SEAICEadvAge turn on advection of ice age (does not work with 11
SEAICEadvArea turn on advection of fraction area 20
SEAICEadvHeff turn on advection of effective thickness 19
SEAICEadvSalt turn on advection of salt (does not work with 13
SEAICEadvSchAge 17
SEAICEadvSchArea 21
SEAICEadvScheme 14
SEAICEadvSchHeff 21
SEAICEadvSchSalt 18
SEAICEadvSchSnow 18
SEAICEadvSnow turn on advection of snow (does not work with 12
SEAICErestoreUnderIce restore surface T/S also underneath ice 7
SEAICEstressFactor 10
SEAICEuseDYNAMICS 12
SEAICEuseEVPpickup 5
SEAICEuseFlooding turn on scheme to convert submerged snow into ice 9
SEAICEuseFluxForm use flux form for advection and diffusion 7
SEAICEuseMetricTerms use metric terms for dynamics solver 7
SEAICEuseTEM 8
SEAICEwriteState 6
SEGRAD 6
select_rStar option related to r* vertical coordinate 54
select_ZenAlbedo switch to different methods to compute albedo (direct part) 0 just use exf_albedo 1 use daily mean albedo from exf_zenithangle_table.F 2 use daily mean albedo computed as in pkg/aim_v23 3 use daily variable albedo 16
selectAddFluid option to add mass source/sink of fluid in the interior 26
selectFindRoSurf select the way surf. ref. pressure (=Ro_surf) is 14
selectKEscheme Kinetic Energy scheme selector (Vector Inv.) 10
selectNHfreeSurf option for Non-Hydrostatic (free-)Surface formulation: 21
selectVortScheme Scheme selector for Vorticity term (Vector Inv.) 30
set_regMask region-mask set-index that define the region n 5
sflux_errfile 10
sflux_exfremo_intercept 6
sflux_exfremo_slope 6
sfluxconst 5
sfluxfile 10
SfluxFile 2
sfluxmeanbarfile 11
sfluxperiod 8
sfluxstartdate1 5
sfluxstartdate2 5
sgrunoff_exfremo_intercept 5
sgrunoff_exfremo_slope 5
sgrunoffconst 5
sgrunoffperiod 7
sgrunoffstartdate 9
sgrunoffstartdate1 5
sgrunoffstartdate2 5
Shap_alwaysExchTr always call exch(Tracer) nShapTr times 9
Shap_alwaysExchUV always call exch(U,V) nShapUV times 10
Shap_diagFreq Frequency^-1 for diagnostic output (s) 8
shap_filt_TrStagg if using a Stagger time-step, filter T,S before 5
shap_filt_uvStar filter applied to u*,v* (before SOLVE_FOR_P) 9
Shap_funct define which Shapiro Filter function is used 44
Shap_noSlip No-slip parameter (=0 free sleep ; =1 No-slip) 8
SHAP_PARM01 2
Shap_TrLength Length scale for tracer filter 9
Shap_Trtau Time scale for tracer filter 11
Shap_uvLength Length scale for momentum filter 11
Shap_uvtau Time scale for momentum filter 22
SHELFICE_dump_mnc 7
SHELFICE_dumpFreq 5
SHELFICE_PARM01 2
SHELFICE_tave_mnc 7
SHELFICE_taveFreq 7
SHELFICEboundaryLayer 4
SHELFICEconserve 7
SHELFICEDragLinear 5
SHELFICEDragQuadratic 5
shelfIceFile File containing the topography of the shelfice draught 4
SHELFICEHeatCapacity_Cp 4
SHELFICEheatTransCoeff 10
SHELFICEkappa 6
SHELFICElatentHeat 10
SHELFICEloadAnomalyFile 6
SHELFICEsaltTransCoeff 11
SHELFICEthetaSurface 8
SHELFICEtopoFile 6
SHELFICEwriteState 5
sideDragFactor side-drag scaling factor (used only if no_slip_sides) 12
siobEperiod 8
siobEstartdate1 7
siobEstartdate2 7
siobNperiod 8
siobNstartdate1 7
siobNstartdate2 7
siobSperiod 8
siobSstartdate1 7
siobSstartdate2 7
siobWperiod 8
siobWstartdate1 7
siobWstartdate2 7
SMF 6
smooth2D_Lx0 6
smooth2D_Ly0 6
smooth2Dfilter 7
smooth2Dnbt 8
smooth2Dsize 5
smooth2Dtype 7
smooth3D_Lx0 6
smooth3D_Ly0 6
smooth3D_Lz0 6
smooth3Dfilter 7
smooth3Dnbt 8
smooth3DsizeH 5
smooth3DsizeZ 6
smooth3DtypeH 6
smooth3DtypeZ 6
smooth_nml 2
smoothAbsFuncRange 1/2 of interval around zero, for which FORTRAN ABS 14
smrarea_errfile 6
smrareabarfile 12
smrareadatfile 9
smrareaperiod 3
smrareastartdate1 5
smrareastartdate2 5
smrsssbarfile 9
smrsstbarfile 9
sMxL_default default value for salinity in MixLayer [psu] 9
snapshot_mnc 25
snow_emissivity 15
snowAgTime snow aging time scale [s] 6
snowprecip_errfile 6
snowprecip_exfremo_intercept 5
snowprecip_exfremo_slope 5
snowprecipconst 5
snowprecipfile 7
snowprecipperiod 7
snowprecipstartdate1 5
snowprecipstartdate2 5
SolarFile 17
SOLC 16
SOLV_MAX_ITERS 11
SOLV_NCHECK 13
spongeThickness number grid points that make up the sponge layer (def=0) 100
SPovershoot 6
sRef reference vertical profile for salinity/specific humidity 46
sRefFile File containing reference salinity/spec.humid. sRef (1.D) 10
ssh_errfile 8
sshv4cost_errfactor 5
sshv4cost_errfile 6
sssdatfile 8
ssserrfile 7
sssstartdate1 6
sssstartdate2 6
sstbarfile 9
sstdatfile 9
ssterrfile 7
sstExtrapol extrapolation coeff from 1rst 2 levels up to surface 9
sststartdate1 6
sststartdate2 6
STABILITY_THRESHOLD 8
staggerTimeStep enable a Stagger time stepping U,V (& W) then T,S 34
startDate 4
startDate_1 7
startDate_2 7
startFromPickupAB2 with AB-3 code, start from an AB-2 pickup 8
startIceModel =1 : start ice model at nIter0 ; =0 : use pickup files -1 : start from a small pickup (without Mix.Layer) 7
startTime Starting time for this integration ( s ). 148
startYear 7
stat_fields List of statistics output Fields 7
stat_fname List of statistics output Filename 9
stat_freq Frequency (in s) of statistics output 7
stat_phase phase (in s) to write statistics output 5
stat_region List of statistics output Regions 4
stefan Stefan-Boltzmann constant [W/m^2/K^4] 27
stepFwd_oceMxL step forward mixed-layer T & S (slab-ocean) 18
stressReduction reduction factor for wind-stress under sea-ice [0-1] 18
surfQfile File containing surface heat flux, excluding SW 4
surfQnetFile File containing surface net heat flux 12
surfQswFile File containing surface shortwave radiation 12
SWCAP 9
swdown_errfile 6
swdown_exfremo_intercept 5
swdown_exfremo_slope 5
swdownconst 5
swdownfile 10
swdownperiod 10
swdownstartdate1 5
swdownstartdate2 5
swflux_errfile 6
swflux_exfremo_intercept 5
swflux_exfremo_slope 5
swfluxconst 5
swfluxfile 10
swfluxperiod 8
swfluxstartdate1 5
swfluxstartdate2 5
SWWIL 9