C $Header: /u/gcmpack/MITgcm/pkg/seaice/seaice_advection.F,v 1.20 2010/11/08 03:27:30 jmc Exp $
C $Name: $
#include "SEAICE_OPTIONS.h"
#ifdef ALLOW_GENERIC_ADVDIFF
# include "GAD_OPTIONS.h"
#endif
C---+----1----+----2----+----3----+----4----+----5----+----6----+----7-|--+----|
CBOP
C !ROUTINE: SEAICE_ADVECTION
C !INTERFACE: ==========================================================
SUBROUTINE SEAICE_ADVECTION(
I tracerIdentity,
I advectionScheme,
I uFld, vFld, uTrans, vTrans, iceFld, r_hFld,
O gFld, afx, afy,
I bi, bj, myTime, myIter, myThid)
C !DESCRIPTION:
C Calculates the tendency of a sea-ice field due to advection.
C It uses the multi-dimensional method given in \ref{sect:multiDimAdvection}
C and can only be used for the non-linear advection schemes such as the
C direct-space-time method and flux-limiters.
C
C This routine is an adaption of the GAD_ADVECTION for 2D-fields.
C for Area, effective thickness or other "extensive" sea-ice field,
C the contribution iceFld*div(u) (that is present in gad_advection)
C is not included here.
C
C The algorithm is as follows:
C \begin{itemize}
C \item{$\theta^{(n+1/2)} = \theta^{(n)}
C - \Delta t \partial_x (u\theta^{(n)}) + \theta^{(n)} \partial_x u$}
C \item{$\theta^{(n+2/2)} = \theta^{(n+1/2)}
C - \Delta t \partial_y (v\theta^{(n+1/2)}) + \theta^{(n)} \partial_y v$}
C \item{$G_\theta = ( \theta^{(n+2/2)} - \theta^{(n)} )/\Delta t$}
C \end{itemize}
C
C The tendency (output) is over-written by this routine.
C !USES: ===============================================================
IMPLICIT NONE
#include "SIZE.h"
#include "EEPARAMS.h"
#include "PARAMS.h"
#include "GRID.h"
#include "SEAICE_PARAMS.h"
#ifdef ALLOW_GENERIC_ADVDIFF
# include "GAD.h"
#endif
#ifdef ALLOW_AUTODIFF_TAMC
# include "tamc.h"
# include "tamc_keys.h"
#endif
#ifdef ALLOW_EXCH2
#include "W2_EXCH2_SIZE.h"
#include "W2_EXCH2_TOPOLOGY.h"
#endif /* ALLOW_EXCH2 */
LOGICAL extensiveFld
PARAMETER ( extensiveFld = .TRUE. )
C !INPUT PARAMETERS: ===================================================
C tracerIdentity :: tracer identifier
C advectionScheme :: advection scheme to use (Horizontal plane)
C extensiveFld :: indicates to advect an "extensive" type of ice field
C uFld :: velocity, zonal component
C vFld :: velocity, meridional component
C uTrans,vTrans :: volume transports at U,V points
C iceFld :: sea-ice field
C r_hFld :: reciprocal of ice-thickness (only used for "intensive"
C type of sea-ice field)
C bi,bj :: tile indices
C myTime :: current time
C myIter :: iteration number
C myThid :: my Thread Id number
INTEGER tracerIdentity
INTEGER advectionScheme
_RL uFld (1-OLx:sNx+OLx,1-OLy:sNy+OLy)
_RL vFld (1-OLx:sNx+OLx,1-OLy:sNy+OLy)
_RL uTrans(1-OLx:sNx+OLx,1-OLy:sNy+OLy)
_RL vTrans(1-OLx:sNx+OLx,1-OLy:sNy+OLy)
_RL iceFld(1-OLx:sNx+OLx,1-OLy:sNy+OLy)
_RL r_hFld(1-OLx:sNx+OLx,1-OLy:sNy+OLy)
INTEGER bi,bj
_RL myTime
INTEGER myIter
INTEGER myThid
C !OUTPUT PARAMETERS: ==================================================
C gFld :: tendency array
C afx :: horizontal advective flux, x direction
C afy :: horizontal advective flux, y direction
_RL gFld (1-OLx:sNx+OLx,1-OLy:sNy+OLy)
_RL afx (1-OLx:sNx+OLx,1-OLy:sNy+OLy)
_RL afy (1-OLx:sNx+OLx,1-OLy:sNy+OLy)
C !LOCAL VARIABLES: ====================================================
C maskLocW :: 2-D array for mask at West points
C maskLocS :: 2-D array for mask at South points
C iMin,iMax, :: loop range for called routines
C jMin,jMax :: loop range for called routines
C [iMin,iMax]Upd :: loop range to update sea-ice field
C [jMin,jMax]Upd :: loop range to update sea-ice field
C i,j,k :: loop indices
C af :: 2-D array for horizontal advective flux
C localTij :: 2-D array, temporary local copy of sea-ice fld
C calc_fluxes_X :: logical to indicate to calculate fluxes in X dir
C calc_fluxes_Y :: logical to indicate to calculate fluxes in Y dir
C interiorOnly :: only update the interior of myTile, but not the edges
C overlapOnly :: only update the edges of myTile, but not the interior
C nipass :: number of passes in multi-dimensional method
C ipass :: number of the current pass being made
C myTile :: variables used to determine which cube face
C nCFace :: owns a tile for cube grid runs using
C :: multi-dim advection.
C [N,S,E,W]_edge :: true if N,S,E,W edge of myTile is an Edge of the cube
_RS maskLocW(1-OLx:sNx+OLx,1-OLy:sNy+OLy)
_RS maskLocS(1-OLx:sNx+OLx,1-OLy:sNy+OLy)
INTEGER iMin,iMax,jMin,jMax
INTEGER iMinUpd,iMaxUpd,jMinUpd,jMaxUpd
INTEGER i,j,k
_RL af (1-OLx:sNx+OLx,1-OLy:sNy+OLy)
_RL localTij(1-OLx:sNx+OLx,1-OLy:sNy+OLy)
LOGICAL calc_fluxes_X, calc_fluxes_Y, withSigns
LOGICAL interiorOnly, overlapOnly
INTEGER nipass,ipass
INTEGER nCFace
LOGICAL N_edge, S_edge, E_edge, W_edge
#ifdef ALLOW_EXCH2
INTEGER myTile
#endif
#ifdef ALLOW_DIAGNOSTICS
CHARACTER*8 diagName
CHARACTER*4 SEAICE_DIAG_SUFX, diagSufx
EXTERNAL
#endif
LOGICAL dBug
_RL tmpFac
CEOP
#ifdef ALLOW_AUTODIFF_TAMC
act0 = tracerIdentity - 1
max0 = maxpass
act1 = bi - myBxLo(myThid)
max1 = myBxHi(myThid) - myBxLo(myThid) + 1
act2 = bj - myByLo(myThid)
max2 = myByHi(myThid) - myByLo(myThid) + 1
act3 = myThid - 1
max3 = nTx*nTy
act4 = ikey_dynamics - 1
igadkey = (act0 + 1)
& + act1*max0
& + act2*max0*max1
& + act3*max0*max1*max2
& + act4*max0*max1*max2*max3
if (tracerIdentity.GT.maxpass) then
print *, 'ph-pass gad_advection ', maxpass, tracerIdentity
STOP 'maxpass seems smaller than tracerIdentity'
endif
#endif /* ALLOW_AUTODIFF_TAMC */
#ifdef ALLOW_DIAGNOSTICS
C-- Set diagnostic suffix for the current tracer
IF ( useDiagnostics ) THEN
diagSufx = SEAICE_DIAG_SUFX( tracerIdentity, myThid )
ENDIF
#endif
dBug = debugLevel.GE.debLevB
& .AND. myIter.EQ.nIter0
& .AND. ( tracerIdentity.EQ.GAD_HEFF .OR.
& tracerIdentity.EQ.GAD_QICE2 )
c & .AND. tracerIdentity.EQ.GAD_HEFF
C-- Set up work arrays with valid (i.e. not NaN) values
C These inital values do not alter the numerical results. They
C just ensure that all memory references are to valid floating
C point numbers. This prevents spurious hardware signals due to
C uninitialised but inert locations.
#ifdef ALLOW_AUTODIFF_TAMC
DO j=1-OLy,sNy+OLy
DO i=1-OLx,sNx+OLx
localTij(i,j) = 0. _d 0
ENDDO
ENDDO
#endif
C-- Set tile-specific parameters for horizontal fluxes
IF (useCubedSphereExchange) THEN
nipass=3
#ifdef ALLOW_AUTODIFF_TAMC
IF ( nipass.GT.maxcube ) STOP 'maxcube needs to be = 3'
#endif
#ifdef ALLOW_EXCH2
myTile = W2_myTileList(bi,bj)
nCFace = exch2_myFace(myTile)
N_edge = exch2_isNedge(myTile).EQ.1
S_edge = exch2_isSedge(myTile).EQ.1
E_edge = exch2_isEedge(myTile).EQ.1
W_edge = exch2_isWedge(myTile).EQ.1
#else
nCFace = bi
N_edge = .TRUE.
S_edge = .TRUE.
E_edge = .TRUE.
W_edge = .TRUE.
#endif
ELSE
nipass=2
nCFace = bi
N_edge = .FALSE.
S_edge = .FALSE.
E_edge = .FALSE.
W_edge = .FALSE.
ENDIF
iMin = 1-OLx
iMax = sNx+OLx
jMin = 1-OLy
jMax = sNy+OLy
k = 1
C-- Start of k loop for horizontal fluxes
#ifdef ALLOW_AUTODIFF_TAMC
kkey = (igadkey-1)*Nr + k
CADJ STORE iceFld =
CADJ & comlev1_bibj_k_gad, key=kkey, byte=isbyte
#endif /* ALLOW_AUTODIFF_TAMC */
C Content of CALC_COMMON_FACTORS, adapted for 2D fields
C-- Get temporary terms used by tendency routines
C-- Make local copy of sea-ice field and mask West & South
DO j=1-OLy,sNy+OLy
DO i=1-OLx,sNx+OLx
localTij(i,j)=iceFld(i,j)
maskLocW(i,j)=maskW(i,j,k,bi,bj)
maskLocS(i,j)=maskS(i,j,k,bi,bj)
ENDDO
ENDDO
#ifdef ALLOW_AUTODIFF_TAMC
C- Initialise Advective flux in X & Y
DO j=1-OLy,sNy+OLy
DO i=1-OLx,sNx+OLx
afx(i,j) = 0.
afy(i,j) = 0.
ENDDO
ENDDO
#endif
#ifndef ALLOW_AUTODIFF_TAMC
IF (useCubedSphereExchange) THEN
withSigns = .FALSE.
CALL FILL_CS_CORNER_UV_RS(
& withSigns, maskLocW,maskLocS, bi,bj, myThid )
ENDIF
#endif
C-- Multiple passes for different directions on different tiles
C-- For cube need one pass for each of red, green and blue axes.
DO ipass=1,nipass
#ifdef ALLOW_AUTODIFF_TAMC
passkey = ipass + (k-1) *maxcube
& + (igadkey-1)*maxcube*Nr
IF (nipass .GT. maxpass) THEN
STOP 'SEAICE_ADVECTION: nipass > maxcube. check tamc.h'
ENDIF
#endif /* ALLOW_AUTODIFF_TAMC */
interiorOnly = .FALSE.
overlapOnly = .FALSE.
IF (useCubedSphereExchange) THEN
C-- CubedSphere : pass 3 times, with partial update of local seaice field
IF (ipass.EQ.1) THEN
overlapOnly = MOD(nCFace,3).EQ.0
interiorOnly = MOD(nCFace,3).NE.0
calc_fluxes_X = nCFace.EQ.6 .OR. nCFace.EQ.1 .OR. nCFace.EQ.2
calc_fluxes_Y = nCFace.EQ.3 .OR. nCFace.EQ.4 .OR. nCFace.EQ.5
ELSEIF (ipass.EQ.2) THEN
overlapOnly = MOD(nCFace,3).EQ.2
calc_fluxes_X = nCFace.EQ.2 .OR. nCFace.EQ.3 .OR. nCFace.EQ.4
calc_fluxes_Y = nCFace.EQ.5 .OR. nCFace.EQ.6 .OR. nCFace.EQ.1
ELSE
calc_fluxes_X = nCFace.EQ.5 .OR. nCFace.EQ.6
calc_fluxes_Y = nCFace.EQ.2 .OR. nCFace.EQ.3
ENDIF
ELSE
C-- not CubedSphere
calc_fluxes_X = MOD(ipass,2).EQ.1
calc_fluxes_Y = .NOT.calc_fluxes_X
ENDIF
IF (dBug.AND.bi.EQ.3 ) WRITE(6,*) 'ICE_adv:',tracerIdentity,
& ipass,calc_fluxes_X,calc_fluxes_Y,overlapOnly,interiorOnly
C---+----1----+----2----+----3----+----4----+----5----+----6----+----7-|--+----|
C-- X direction
#ifdef ALLOW_AUTODIFF_TAMC
CADJ STORE localTij(:,:) =
CADJ & comlev1_bibj_k_gad_pass, key=passkey, byte=isbyte
# ifndef DISABLE_MULTIDIM_ADVECTION
CADJ STORE af(:,:) =
CADJ & comlev1_bibj_k_gad_pass, key=passkey, byte=isbyte
# endif
#endif /* ALLOW_AUTODIFF_TAMC */
C
IF (calc_fluxes_X) THEN
C- Do not compute fluxes if
C a) needed in overlap only
C and b) the overlap of myTile are not cube-face Edges
IF ( .NOT.overlapOnly .OR. N_edge .OR. S_edge ) THEN
C- Advective flux in X
DO j=1-Oly,sNy+Oly
DO i=1-Olx,sNx+Olx
af(i,j) = 0.
ENDDO
ENDDO
#ifndef ALLOW_AUTODIFF_TAMC
C- Internal exchange for calculations in X
IF ( useCubedSphereExchange .AND.
& ( overlapOnly .OR. ipass.EQ.1 ) ) THEN
CALL FILL_CS_CORNER_TR_RL( 1, .FALSE.,
& localTij, bi,bj, myThid )
ENDIF
#endif
#ifdef ALLOW_AUTODIFF_TAMC
# ifndef DISABLE_MULTIDIM_ADVECTION
CADJ STORE localTij(:,:) =
CADJ & comlev1_bibj_k_gad_pass, key=passkey, byte=isbyte
# endif
#endif /* ALLOW_AUTODIFF_TAMC */
IF ( advectionScheme.EQ.ENUM_UPWIND_1RST
& .OR. advectionScheme.EQ.ENUM_DST2 ) THEN
CALL GAD_DST2U1_ADV_X( bi,bj,k, advectionScheme, .TRUE.,
I SEAICE_deltaTtherm, uTrans, uFld, localTij,
O af, myThid )
IF ( dBug .AND. bi.EQ.3 ) THEN
i=MIN(12,sNx)
j=MIN(11,sNy)
WRITE(6,'(A,1P4E14.6)') 'ICE_adv: xFx=', af(i+1,j),
& localTij(i,j), uTrans(i+1,j), af(i+1,j)/uTrans(i+1,j)
ENDIF
ELSEIF (advectionScheme.EQ.ENUM_FLUX_LIMIT) THEN
CALL GAD_FLUXLIMIT_ADV_X( bi,bj,k, .TRUE.,
I SEAICE_deltaTtherm, uTrans, uFld, maskLocW, localTij,
O af, myThid )
ELSEIF (advectionScheme.EQ.ENUM_DST3 ) THEN
CALL GAD_DST3_ADV_X( bi,bj,k, .TRUE.,
I SEAICE_deltaTtherm, uTrans, uFld, maskLocW, localTij,
O af, myThid )
ELSEIF (advectionScheme.EQ.ENUM_DST3_FLUX_LIMIT ) THEN
CALL GAD_DST3FL_ADV_X( bi,bj,k, .TRUE.,
I SEAICE_deltaTtherm, uTrans, uFld, maskLocW, localTij,
O af, myThid )
#ifndef ALLOW_AUTODIFF_TAMC
ELSEIF (advectionScheme.EQ.ENUM_OS7MP ) THEN
CALL GAD_OS7MP_ADV_X( bi,bj,k, .TRUE.,
I SEAICE_deltaTtherm, uTrans, uFld, maskLocW, localTij,
O af, myThid )
#endif
ELSE
STOP
& 'SEAICE_ADVECTION: adv. scheme incompatibale with multi-dim'
ENDIF
C-- Advective flux in X : done
ENDIF
#ifndef ALLOW_AUTODIFF_TAMC
C-- Internal exchange for next calculations in Y
IF ( overlapOnly .AND. ipass.EQ.1 ) THEN
CALL FILL_CS_CORNER_TR_RL( 2, .FALSE.,
& localTij, bi,bj, myThid )
ENDIF
#endif
C- Update the local seaice field where needed:
C update in overlap-Only
IF ( overlapOnly ) THEN
iMinUpd = 1-OLx+1
iMaxUpd = sNx+OLx-1
C-- notes: these 2 lines below have no real effect (because recip_hFac=0
C in corner region) but safer to keep them.
IF ( W_edge ) iMinUpd = 1
IF ( E_edge ) iMaxUpd = sNx
IF ( S_edge .AND. extensiveFld ) THEN
DO j=1-OLy,0
DO i=iMinUpd,iMaxUpd
localTij(i,j)=localTij(i,j)
& -SEAICE_deltaTtherm*maskInC(i,j,bi,bj)
& *recip_rA(i,j,bi,bj)
& *( af(i+1,j)-af(i,j)
& )
ENDDO
ENDDO
ELSEIF ( S_edge ) THEN
DO j=1-OLy,0
DO i=iMinUpd,iMaxUpd
localTij(i,j)=localTij(i,j)
& -SEAICE_deltaTtherm*maskInC(i,j,bi,bj)
& *recip_rA(i,j,bi,bj)*r_hFld(i,j)
& *( (af(i+1,j)-af(i,j))
& -(uTrans(i+1,j)-uTrans(i,j))*iceFld(i,j)
& )
ENDDO
ENDDO
ENDIF
IF ( N_edge .AND. extensiveFld ) THEN
DO j=sNy+1,sNy+OLy
DO i=iMinUpd,iMaxUpd
localTij(i,j)=localTij(i,j)
& -SEAICE_deltaTtherm*maskInC(i,j,bi,bj)
& *recip_rA(i,j,bi,bj)
& *( af(i+1,j)-af(i,j)
& )
ENDDO
ENDDO
ELSEIF ( N_edge ) THEN
DO j=sNy+1,sNy+OLy
DO i=iMinUpd,iMaxUpd
localTij(i,j)=localTij(i,j)
& -SEAICE_deltaTtherm*maskInC(i,j,bi,bj)
& *recip_rA(i,j,bi,bj)*r_hFld(i,j)
& *( (af(i+1,j)-af(i,j))
& -(uTrans(i+1,j)-uTrans(i,j))*iceFld(i,j)
& )
ENDDO
ENDDO
ENDIF
C-- keep advective flux (for diagnostics)
IF ( S_edge ) THEN
DO j=1-OLy,0
DO i=1-OLx+1,sNx+OLx
afx(i,j) = af(i,j)
ENDDO
ENDDO
ENDIF
IF ( N_edge ) THEN
DO j=sNy+1,sNy+OLy
DO i=1-OLx+1,sNx+OLx
afx(i,j) = af(i,j)
ENDDO
ENDDO
ENDIF
ELSE
C do not only update the overlap
jMinUpd = 1-OLy
jMaxUpd = sNy+OLy
IF ( interiorOnly .AND. S_edge ) jMinUpd = 1
IF ( interiorOnly .AND. N_edge ) jMaxUpd = sNy
IF ( extensiveFld ) THEN
DO j=jMinUpd,jMaxUpd
DO i=1-OLx+1,sNx+OLx-1
localTij(i,j)=localTij(i,j)
& -SEAICE_deltaTtherm*maskInC(i,j,bi,bj)
& *recip_rA(i,j,bi,bj)
& *( af(i+1,j)-af(i,j)
& )
ENDDO
ENDDO
ELSE
DO j=jMinUpd,jMaxUpd
DO i=1-OLx+1,sNx+OLx-1
localTij(i,j)=localTij(i,j)
& -SEAICE_deltaTtherm*maskInC(i,j,bi,bj)
& *recip_rA(i,j,bi,bj)*r_hFld(i,j)
& *( (af(i+1,j)-af(i,j))
& -(uTrans(i+1,j)-uTrans(i,j))*iceFld(i,j)
& )
ENDDO
ENDDO
ENDIF
C-- keep advective flux (for diagnostics)
DO j=jMinUpd,jMaxUpd
DO i=1-OLx+1,sNx+OLx
afx(i,j) = af(i,j)
ENDDO
ENDDO
C- end if/else update overlap-Only
ENDIF
C-- End of X direction
ENDIF
C---+----1----+----2----+----3----+----4----+----5----+----6----+----7-|--+----|
C-- Y direction
#ifdef ALLOW_AUTODIFF_TAMC
# ifndef DISABLE_MULTIDIM_ADVECTION
CADJ STORE localTij(:,:) =
CADJ & comlev1_bibj_k_gad_pass, key=passkey, byte=isbyte
CADJ STORE af(:,:) =
CADJ & comlev1_bibj_k_gad_pass, key=passkey, byte=isbyte
# endif
#endif /* ALLOW_AUTODIFF_TAMC */
IF (calc_fluxes_Y) THEN
C- Do not compute fluxes if
C a) needed in overlap only
C and b) the overlap of myTile are not cube-face edges
IF ( .NOT.overlapOnly .OR. E_edge .OR. W_edge ) THEN
C- Advective flux in Y
DO j=1-OLy,sNy+OLy
DO i=1-OLx,sNx+OLx
af(i,j) = 0.
ENDDO
ENDDO
#ifndef ALLOW_AUTODIFF_TAMC
C- Internal exchange for calculations in Y
IF ( useCubedSphereExchange .AND.
& ( overlapOnly .OR. ipass.EQ.1 ) ) THEN
CALL FILL_CS_CORNER_TR_RL( 2, .FALSE.,
& localTij, bi,bj, myThid )
ENDIF
#endif
#ifdef ALLOW_AUTODIFF_TAMC
#ifndef DISABLE_MULTIDIM_ADVECTION
CADJ STORE localTij(:,:) =
CADJ & comlev1_bibj_k_gad_pass, key=passkey, byte=isbyte
#endif
#endif /* ALLOW_AUTODIFF_TAMC */
IF ( advectionScheme.EQ.ENUM_UPWIND_1RST
& .OR. advectionScheme.EQ.ENUM_DST2 ) THEN
CALL GAD_DST2U1_ADV_Y( bi,bj,k, advectionScheme, .TRUE.,
I SEAICE_deltaTtherm, vTrans, vFld, localTij,
O af, myThid )
IF ( dBug .AND. bi.EQ.3 ) THEN
i=MIN(12,sNx)
j=MIN(11,sNy)
WRITE(6,'(A,1P4E14.6)') 'ICE_adv: yFx=', af(i,j+1),
& localTij(i,j), vTrans(i,j+1), af(i,j+1)/vTrans(i,j+1)
ENDIF
ELSEIF (advectionScheme.EQ.ENUM_FLUX_LIMIT) THEN
CALL GAD_FLUXLIMIT_ADV_Y( bi,bj,k, .TRUE.,
I SEAICE_deltaTtherm, vTrans, vFld, maskLocS, localTij,
O af, myThid )
ELSEIF (advectionScheme.EQ.ENUM_DST3 ) THEN
CALL GAD_DST3_ADV_Y( bi,bj,k, .TRUE.,
I SEAICE_deltaTtherm, vTrans, vFld, maskLocS, localTij,
O af, myThid )
ELSEIF (advectionScheme.EQ.ENUM_DST3_FLUX_LIMIT ) THEN
CALL GAD_DST3FL_ADV_Y( bi,bj,k, .TRUE.,
I SEAICE_deltaTtherm, vTrans, vFld, maskLocS, localTij,
O af, myThid )
#ifndef ALLOW_AUTODIFF_TAMC
ELSEIF (advectionScheme.EQ.ENUM_OS7MP ) THEN
CALL GAD_OS7MP_ADV_Y( bi,bj,k, .TRUE.,
I SEAICE_deltaTtherm, vTrans, vFld, maskLocS, localTij,
O af, myThid )
#endif
ELSE
STOP
& 'SEAICE_ADVECTION: adv. scheme incompatibale with mutli-dim'
ENDIF
C- Advective flux in Y : done
ENDIF
#ifndef ALLOW_AUTODIFF_TAMC
C- Internal exchange for next calculations in X
IF ( overlapOnly .AND. ipass.EQ.1 ) THEN
CALL FILL_CS_CORNER_TR_RL( 1, .FALSE.,
& localTij, bi,bj, myThid )
ENDIF
#endif
C- Update the local seaice field where needed:
C update in overlap-Only
IF ( overlapOnly ) THEN
jMinUpd = 1-OLy+1
jMaxUpd = sNy+OLy-1
C- notes: these 2 lines below have no real effect (because recip_hFac=0
C in corner region) but safer to keep them.
IF ( S_edge ) jMinUpd = 1
IF ( N_edge ) jMaxUpd = sNy
IF ( W_edge .AND. extensiveFld ) THEN
DO j=jMinUpd,jMaxUpd
DO i=1-OLx,0
localTij(i,j)=localTij(i,j)
& -SEAICE_deltaTtherm*maskInC(i,j,bi,bj)
& *recip_rA(i,j,bi,bj)
& *( af(i,j+1)-af(i,j)
& )
ENDDO
ENDDO
ELSEIF ( W_edge ) THEN
DO j=jMinUpd,jMaxUpd
DO i=1-OLx,0
localTij(i,j)=localTij(i,j)
& -SEAICE_deltaTtherm*maskInC(i,j,bi,bj)
& *recip_rA(i,j,bi,bj)*r_hFld(i,j)
& *( (af(i,j+1)-af(i,j))
& -(vTrans(i,j+1)-vTrans(i,j))*iceFld(i,j)
& )
ENDDO
ENDDO
ENDIF
IF ( E_edge .AND. extensiveFld ) THEN
DO j=jMinUpd,jMaxUpd
DO i=sNx+1,sNx+OLx
localTij(i,j)=localTij(i,j)
& -SEAICE_deltaTtherm*maskInC(i,j,bi,bj)
& *recip_rA(i,j,bi,bj)
& *( af(i,j+1)-af(i,j)
& )
ENDDO
ENDDO
ELSEIF ( E_edge ) THEN
DO j=jMinUpd,jMaxUpd
DO i=sNx+1,sNx+OLx
localTij(i,j)=localTij(i,j)
& -SEAICE_deltaTtherm*maskInC(i,j,bi,bj)
& *recip_rA(i,j,bi,bj)*r_hFld(i,j)
& *( (af(i,j+1)-af(i,j))
& -(vTrans(i,j+1)-vTrans(i,j))*iceFld(i,j)
& )
ENDDO
ENDDO
ENDIF
C-- keep advective flux (for diagnostics)
IF ( W_edge ) THEN
DO j=1-OLy+1,sNy+OLy
DO i=1-OLx,0
afy(i,j) = af(i,j)
ENDDO
ENDDO
ENDIF
IF ( E_edge ) THEN
DO j=1-OLy+1,sNy+OLy
DO i=sNx+1,sNx+OLx
afy(i,j) = af(i,j)
ENDDO
ENDDO
ENDIF
ELSE
C do not only update the overlap
iMinUpd = 1-OLx
iMaxUpd = sNx+OLx
IF ( interiorOnly .AND. W_edge ) iMinUpd = 1
IF ( interiorOnly .AND. E_edge ) iMaxUpd = sNx
IF ( extensiveFld ) THEN
DO j=1-OLy+1,sNy+OLy-1
DO i=iMinUpd,iMaxUpd
localTij(i,j)=localTij(i,j)
& -SEAICE_deltaTtherm*maskInC(i,j,bi,bj)
& *recip_rA(i,j,bi,bj)
& *( af(i,j+1)-af(i,j)
& )
ENDDO
ENDDO
ELSE
DO j=1-OLy+1,sNy+OLy-1
DO i=iMinUpd,iMaxUpd
localTij(i,j)=localTij(i,j)
& -SEAICE_deltaTtherm*maskInC(i,j,bi,bj)
& *recip_rA(i,j,bi,bj)*r_hFld(i,j)
& *( (af(i,j+1)-af(i,j))
& -(vTrans(i,j+1)-vTrans(i,j))*iceFld(i,j)
& )
ENDDO
ENDDO
ENDIF
C-- keep advective flux (for diagnostics)
DO j=1-OLy+1,sNy+OLy
DO i=iMinUpd,iMaxUpd
afy(i,j) = af(i,j)
ENDDO
ENDDO
C end if/else update overlap-Only
ENDIF
C-- End of Y direction
ENDIF
C-- End of ipass loop
ENDDO
C- explicit advection is done ; store tendency in gFld:
DO j=1-OLy,sNy+OLy
DO i=1-OLx,sNx+OLx
gFld(i,j)=(localTij(i,j)-iceFld(i,j))/SEAICE_deltaTtherm
ENDDO
ENDDO
IF ( dBug .AND. bi.EQ.3 ) THEN
i=MIN(12,sNx)
j=MIN(11,sNy)
tmpFac= SEAICE_deltaTtherm*recip_rA(i,j,bi,bj)
WRITE(6,'(A,1P4E14.6)') 'ICE_adv:',
& afx(i,j)*tmpFac,afx(i+1,j)*tmpFac,
& afy(i,j)*tmpFac,afy(i,j+1)*tmpFac
ENDIF
#ifdef ALLOW_DIAGNOSTICS
IF ( useDiagnostics ) THEN
diagName = 'ADVx'//diagSufx
CALL DIAGNOSTICS_FILL(afx,diagName, k,1, 2,bi,bj, myThid)
diagName = 'ADVy'//diagSufx
CALL DIAGNOSTICS_FILL(afy,diagName, k,1, 2,bi,bj, myThid)
ENDIF
#endif
#ifdef ALLOW_DEBUG
IF ( debugLevel .GE. debLevB
& .AND. tracerIdentity.EQ.GAD_HEFF
& .AND. k.LE.3 .AND. myIter.EQ.1+nIter0
& .AND. nPx.EQ.1 .AND. nPy.EQ.1
& .AND. useCubedSphereExchange ) THEN
CALL DEBUG_CS_CORNER_UV( ' afx,afy from SEAICE_ADVECTION',
& afx,afy, k, standardMessageUnit,bi,bj,myThid )
ENDIF
#endif /* ALLOW_DEBUG */
RETURN
END