A A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Symbol	Description	Uses
A22		16
abEps	Adams-Bashforth-2 stabilizing weight	22
ABIOTIC_PARMS		2
ABLCL1		7
ABLCL2		7
ABLCO2		7
ABLWIN		9
ABLWV1		6
ABLWV2		6
ABSAER		7
ABSCL1		6
ABSCL2		6
ABSDRY		8
ABSWV1		9
ABSWV2		6
adjDumpFreq		12
adjMonitorFreq		5
adTapeDir	read-write checkpointing tape files from/to this	16
aim_albFile	file name for Albedo input file (F.M. surfBC)	6
aim_clrSkyDiag	compute clear-sky radiation for diagnostics	11
Aim_CO2_Flag	flag for CO2 mode, (1:prescribed, 2:interactive)	7
aim_diagFreq	Frequency^-1 for diagnostic output (s)	6
aim_dragStrato	stratospheric-drag damping time scale (s)	11
aim_energPrecip	account for energy of precipitation (snow & rain temp)	10
aim_LandFile	file name for Land fraction	7
aim_lstFile	file name for Land.Surf.Temp (F.M. surfBC)	7
aim_MMsufx	sufix for all Monthly Mean surface forcing files	8
aim_MMsufxLength	Length of sufix (Monthly Mean surf. forcing files)	8
aim_oiceFile	file name for Sea Ice fraction (F.M. surfBC)	7
AIM_PAR_CNV		2
AIM_PAR_CO2		2
AIM_PAR_FOR		2
AIM_PAR_LSC		2
AIM_PAR_RAD		2
AIM_PAR_SFL		2
AIM_PAR_VDI		2
AIM_PARAMS		2
aim_pickup_read_mnc		9
aim_pickup_write_mnc		9
aim_qfxFile	file name for ocean q-flux	7
aim_selectOceAlbedo	Ocean albedo(latitude) scheme (integer)	7
aim_snapshot_mnc		10
aim_snowFile	file name for Snow depth (F.M. surfBC)	7
aim_splitSIOsFx	compute separately Sea-Ice & Ocean surf. Flux	13
aim_sstFile	file name for Sea.Surf.Temp (F.M. surfBC)	7
aim_surfForc_NppCycle	Number of time period per Cycle (e.g. 12)	11
aim_surfForc_TimePeriod	Length of forcing time period (e.g. 1 month)	8
aim_surfForc_TransRatio	transition ratio from one month to the next	7
aim_surfPotTemp	surf.Temp input file is in Pot.Temp (aim_useMMsurfFc)	7
aim_swcFile	file name for Soil Water content (F.M. surfBC)	9
aim_taveFreq	Frequency^-1 for time-average output (s)	11
aim_tendFreq	Frequency^-1 for tendencies output (s)	6
aim_timeave_mnc		10
aim_useFMsurfBC	select surface B.C. from Franco Molteni	9
aim_useMMsurfFc	select Monthly Mean surface forcing (e.g., NCEP)	14
aim_vegFile	file name for vegetation fraction (F.M. surfBC)	6
AirHumidityFile		5
airPotTempFile		7
AirTempFile		14
ALBCL		6
albColdSnow	albedo of cold (=dry) new snow (Tsfc < tempSnowAlbL)	16
ALBICE		8
albIceMax	max albedo of bare ice (thick ice)	7
albIceMin	minimum ice albedo (very thin ice)	6
albOldSnow	albedo of old snow (snowAge > 35.d)	14
ALBSEA		9
ALBSN		8
albWarmSnow	albedo of warm (=wet) new snow (Tsfc = 0)	12
allowFreezing	Allows surface water to freeze and form ice	8
alpfe	solubility of aeolian fe	6
alph_AB	Adams-Bashforth-3 primary factor	24
alphaUniform		6
applyIcefrontTendS		5
applyIcefrontTendT		5
apressure_errfile		6
apressure_exfremo_intercept		5
apressure_exfremo_slope		5
apressureconst		5
apressurefile		9
apressureperiod		8
apressurestartdate1		5
apressurestartdate2		5
aqh_errfile		10
aqh_exfremo_intercept		5
aqh_exfremo_slope		5
aqhconst		5
aqhfile		9
aqhperiod		8
aqhstartdate1		5
aqhstartdate2		5
AreaFile		10
areamask_exfremo_intercept		5
areamask_exfremo_slope		5
areamaskconst		5
areamaskfile		9
areamaskperiod		8
areamaskstartdate1		5
areamaskstartdate2		5
areamaskTauRelax		4
areaMax		7
areaMin		8
argosfile		9
argosstartdate1		5
argosstartdate2		4
argotfile		9
argotstartdate1		5
argotstartdate2		6
atemp_errfile		10
atemp_exfremo_intercept		5
atemp_exfremo_slope		5
atempconst		5
atempfile		9
atempperiod		8
atempstartdate1		5
atempstartdate2		5
atm_Cp	specific heat (Cp) of the (dry) air at constant pressure	31
atm_emissivity		5
atm_Po	standard reference pressure	51
atm_Rd	gas constant for dry air	12
atm_Rq	water vapour specific volume anomaly relative to dry air	7
atmcp	mean atmospheric specific heat [J/kg/K]	11
atmosTauuFile		7
atmosTauvFile		7
atmosWindFile		7
atmpCO2init		7
atmrho	mean atmospheric density [kg/m^3]	18
autodiff_mnc		8
averagingFreq	frequency (in s) for periodic averaging interval	7
averagingPhase	phase (in s) for periodic averaging interval	4
B A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Symbol	Description	Uses
balanceEmPmR	substract global mean of EmPmR at every time step	6
balancePrintMean	print substracted global means to STDOUT	6
balanceQnet	substract global mean of Qnet at every time step	6
baseTime	model base time (time origin) = time @ iteration zero	46
bathyFile	File containing bathymetry. If not defined bathymetry	26
beta	df/dy ( s^-1.m^-1 )	21
beta_AB	Adams-Bashforth-3 secondary factor	35
BIOTIC_PARMS		2
BL79LatVary	polarwise of this latitude diffKrBL79 is applied with	6
blankList	List of Blank-Tiles (non active)	15
blk_nIter	Number of iterations to find turbulent transfer coeff.	9
blk_taveFreq	time-average output frequency [s]	7
bMeltCoef	base-melting heat transfer coefficient	6
bottomdrag_errfile		6
bottomDragLinear	Linear bottom-drag coefficient (units of [r]/s)	11
bottomDragQuadratic	Quadratic bottom-drag coefficient (units of [r]/m)	11
bpbarfile		10
bpdatfile		9
bperrfile		6
bpstartdate1		6
bpstartdate2		6
BULKF_CONST		2
BULKF_PARM01		2
BULKF_PARM02		2
buoyancyRelation	Flag used to indicate which relation to use to	59
BVSQcon		7
C A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Symbol	Description	Uses
cAdjFreq	Frequency of convective adjustment	18
CAL_NML		1
calcWindStress	True to calculate Wind-Stress from surface wind	6
calendarDumps	moved to package cal (calendar)	9
cDalton	coefficient used to evaluate Dalton number (for Evap)	10
cdalton	coefficient used to evaluate the Dalton number	7
CDL		6
cDrag_1		5
cdrag_1		20
cDrag_2		5
cdrag_2		20
cDrag_3		5
cdrag_3		20
CDS		7
cekman		5
cen2kel	conversion of deg. Centigrade to Kelvin	10
CFC_atmospFile	file name of atmospheric pressure	8
CFC_FORCING		2
CFC_forcingCycle	periodic forcing parameter specific for cfc (seconds)	7
CFC_forcingPeriod	periodic forcing parameter specific for cfc (seconds)	6
CFC_iceFile	file name of seaice fraction	8
CFC_windFile	file name of wind speeds	8
CFIX		12
cg2dChkResFreq	Frequency with which to check residual	5
cg2dMaxIters	Maximum number of iterations in the	6
cg2dpcOffDFac	Averaging weight for preconditioner off-diagonal.	8
cg2dPreCondFreq	Frequency for updating cg2d preconditioner	7
cg2dTargetResidual		6
cg2dTargetResWunit		7
cg3dChkResFreq	Frequency with which to check residual	4
cg3dMaxIters	Maximum number of iterations in the	5
cg3dTargetResidual		6
CHEAPAML_CONST		2
cheapaml_h		6
cheapaml_kdiff		6
cheapaml_ntim		7
CHEAPAML_PARM01		2
CHEAPAML_PARM02		2
cheapaml_taurelax2		6
checkIniSalt	check for points with identically zero initial salinity	6
checkIniTemp	check for points with identically zero initial Pot.Temp.	6
chkPtFreq	Frequency of rolling check pointing ( s ).	13
CHL		8
CHS	heat exchange coefficient over sea	17
climsice		4
climsss_exfremo_intercept		5
climsss_exfremo_slope		5
climsssconst		5
climsssfile		12
climsssperiod		10
climsssstartdate1		5
climsssstartdate2		5
climsssTauRelax		7
climsst		17
climsst_exfremo_intercept		5
climsst_exfremo_slope		5
climsstconst		5
climsstfile		12
climsstperiod		10
climsststartdate1		5
climsststartdate2		5
climsstTauRelax		7
climtempfreeze		7
climustr_exfremo_intercept		5
climustr_exfremo_slope		5
climustrconst		5
climustrfile		9
climustrperiod		9
climustrstartdate1		5
climustrstartdate2		5
climustrTauRelax		4
climvstr_exfremo_intercept		5
climvstr_exfremo_slope		5
climvstrconst		5
climvstrfile		9
climvstrperiod		9
climvstrstartdate1		5
climvstrstartdate2		5
climvstrTauRelax		4
CloudFile		7
CMAX		42
cmonob		5
conam		5
conas		5
conc1		7
conc2		5
conc3		5
concm		5
concs		7
concv		5
conservcycle		3
convertFW2Salt	salinity, used to convert Fresh-Water Flux to Salt Flux	29
ConvFile		9
coord		2
cosPower	Power of cosine of latitude to multiply viscosity	7
cost_ice_flag		11
cost_iprec		87
cost_nml		2
cost_yftype		81
costIceEnd1		5
costIceEnd2		5
costIceStart1		5
costIceStart2		5
costname		18
costTranspDataFile		8
COUPLE_PARM		2
cpAir	specific heat of air [J/kg/K]	6
cpair		10
cpIce	specific heat of fresh ice [J/kg/K]	23
CPL_ATM_PARAM		2
cpl_atmSendFrq	Frequency^-1 for sending data to coupler (s)	5
cpl_earlyExpImpCall	call coupler early in the time stepping call sequence	25
CPL_OCN_PARAM		2
cpl_oldPickup	restart from an old pickup (= until checkpoint 59h)	6
cpl_snapshot_mnc		6
cpl_taveFreq	Frequency^-1 for time-Aver. output (s)	8
cpl_timeave_mnc		8
cpWater	specific heat of water [J/kg/K]	10
CriterionType		8
cstanton_1		9
cstanton_2		9
cStantonS	coefficients used to evaluate Stanton number (for	7
cStantonU		7
cstar		5
CTDAY		6
ctdsclimfile		5
ctdsfile		7
ctdtclimfile		5
ctdtfile		7
CTRL_NML		1
ctrl_nml		3
CTRL_PACKNAMES		1
ctrl_packnames		3
ctrlname		22
curmtrufile		5
curmtrvfile		5
cvapor_exp		6
cvapor_exp_ice		6
cvapor_fac		6
cvapor_fac_ice		6
cvelTimeScale		6
D A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Symbol	Description	Uses
data_errfile		13
dB_dz		7
debugLevel	controls printing of algorithm intermediate results	156
debugMode	controls printing of debug msg (sequence of S/R calls).	279
deepAtmosphere	deep model (drop the shallow-atmosphere approximation)	10
delP	Vertical grid spacing ( Pa ).	5
delR	Vertical grid spacing ( units of r ).	88
delRc	Vertical grid spacing between cell centers (r unit).	13
delRcFile	File containing vertical grid spacing delRc (1.D array)	9
delRFile	File containing vertical grid spacing delR (1.D array)	9
deltaT	Default timestep ( s )	79
deltaTClock	Timestep used as model clock . This determines the	146
deltaTfreesurf	Timestep for free-surface equation ( s )	44
deltaTmom		67
deltaToffline		5
deltaTrbcs	time step used to compute iteration numbers for singleTimeFiles	5
deltaTtracer	Timestep for tracer equations ( s )	13
delX	Separation between cell faces (m) or (deg), depending	78
delXFile	File containing X-spacing grid definition (1.D array)	9
delY		101
delYFile	File containing Y-spacing grid definition (1.D array)	9
delZ	Vertical grid spacing ( m ).	14
delZexp		9
dhSnowLin	half slope of linear distribution of snow thickness within	8
diag_mnc		14
diag_pickup_read		9
diag_pickup_read_mnc		8
diag_pickup_write		8
diag_pickup_write_mnc		8
DIAG_STATIS_PARMS		2
diagFreq	Frequency with which model writes diagnostic output	19
DIAGNOSTICS_LIST		1
diagSt_mnc		10
diagSt_regMaskFile		11
DIC_atmospFile	file name of atmospheric pressure	9
DIC_FORCING		2
DIC_forcingCycle	periodic forcing parameter specific for dic (seconds)	8
DIC_forcingPeriod	periodic forcing parameter specific for dic (seconds)	7
DIC_iceFile	file name of seaice fraction	9
dic_int1		13
dic_int2		6
dic_int3		7
dic_int4		7
DIC_ironFile	file name of aeolian iron flux	9
dic_pCO2	Atmospheric pCO2 to be rad in data.dic	10
DIC_silicaFile	file name of surface silica	13
DIC_windFile	file name of wind speeds	9
DIFF1		10
diffK4S	Biharmonic diffusion coeff. for mixing of	8
diffK4T	Biharmonic diffusion coeff. for mixing of	7
diffKhS	Laplacian diffusion coeff. for mixing of	8
diffKhT	Laplacian diffusion coeff. for mixing of	7
diffKpS	Laplacian diffusion coeff. for mixing of salt vertically ( Pa^2/s )	5
diffKpT	Laplacian diffusion coeff. for mixing of heat vertically ( Pa^2/s )	5
diffkr_errfile		6
diffKrBL79deep	T/S deep diffusivity (m^2/s) Bryan and Lewis, 1979	9
diffKrBL79Ho	depth offset for arctan fn (m) Bryan and Lewis, 1979	9
diffKrBL79scl	depth scale for arctan fn (m) Bryan and Lewis, 1979	9
diffKrBL79surf	T/S surface diffusivity (m^2/s) Bryan and Lewis, 1979	12
diffKrBLEQdeep	same as diffKrBL79deep but at Equator	9
diffKrBLEQHo	same as diffKrBL79Ho but at Equator	9
diffKrBLEQscl	same as diffKrBL79scl but at Equator	9
diffKrBLEQsurf	same as diffKrBL79surf but at Equator	12
diffKrFile	File containing 3D specification of vertical diffusivity	7
diffKrNrS	vertical profile of Laplacian diffusion coeff.	12
diffKrNrT	vertical profile of Laplacian diffusion coeff.	21
diffKrS		12
diffKrT		12
diffKsnow	thermal conductivity of snow (W/m/K)	6
diffKzS	Laplacian diffusion coeff. for mixing of salt vertically ( m^2/s )	5
diffKzT	Laplacian diffusion coeff. for mixing of heat vertically ( m^2/s )	5
difm0		5
difmcon		5
difs0		5
difscon		5
dift0		5
diftcon		5
dimensions		3
dimsFacets	facet pair of dimensions (n1x,n1y,n2x,n2y ...)	6
doAB_onGtGs	if the Adams-Bashforth time stepping is used, always	6
doAdmtlmBypassAD		6
doInitXX		9
doMainPack		10
doMainUnpack		13
doPackDiag		38
DOPfraction	fraction of new production going to DOP	13
doSinglePrecTapelev		6
doZscalePack		8
doZscaleUnpack		6
dQdTFile		2
DRHLSC		6
dRhoSmall	parameter for mixed-layer diagnostic	7
dsfmax		5
dsolmn		5
dsolms		5
dtatm		14
dtcouple		18
DTHETA	Potential temp. gradient for stability correction	31
dtocn		12
dTstab	potential temp. increment for stability function derivative	26
dTtracerLev	Timestep for tracer equations ( s ), function of level k	83
dumpAtLast	always write time-ave (freq>0) diagnostics at the end of the run	8
dumpFreq	Frequency with which model state is written to	31
dumpInitAndLast	dumps model state to files at Initial (nIter0)	14
DWNSLP_drFlow		6
DWNSLP_PARM01		2
DWNSLP_rec_mu	reciprol friction parameter (unit = time scale [s])	6
DWNSLP_slope	fixed slope (=0 => use the local slope)	8
dxSpacing	Default spacing in X and Y. Units are that of coordinate system i.e. cartesian => metres s. polar => degrees	6
dySpacing	Default spacing in X and Y. Units are that of coordinate system i.e. cartesian => metres s. polar => degrees	6
E A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Symbol	Description	Uses
EBM_PARM01		2
ecco_cost_nml		2
ecco_gencost_nml		2
eddyPsiXFile	File containing zonal Eddy streamfunction data	6
eddyPsiYFile	File containing meridional Eddy streamfunction data	6
edtau_errfile		6
EEPARMS		2
EMISFC		11
EmPFile		6
empmr_off		4
EmPmRfile	File containing surface fresh water flux	12
endTime	Ending time for this integration ( s ).	33
endYear		7
ENTMAX		6
ENTRAINMENT_RATE		8
eosType	choose the equation of state:	14
eps		12
epsAB_CD	Adams-Bashforth-2 stabilizing weight used in CD scheme	9
epsf		7
epsg		20
epsilon		17
epsln		19
EPSLW		6
EPSSW		7
epsx		23
ers_errfile		8
ersfile		17
ersintercept		9
ersperiod		10
ersslope		9
ersstartdate1		6
ersstartdate2		6
ersTimeMaskFile		8
evap_errfile		6
evap_exfremo_intercept		5
evap_exfremo_slope		5
evapconst		5
evapFile		7
evapfile		9
evapperiod		8
evapstartdate1		5
evapstartdate2		5
exactConserv	Set to true to conserve exactly the total Volume	36
exf_albedo	Sea-water albedo	9
exf_iceCd	drag coefficient over sea-ice (fixed)	5
exf_iceCe	transfert coeff. over sea-ice, for Evaporation (fixed)	6
exf_iceCh	transfert coeff. over sea-ice, for Sens.Heating (fixed)	7
exf_inscal_apressure		6
exf_inscal_aqh		6
exf_inscal_atemp		6
exf_inscal_climsss		6
exf_inscal_climsst		6
exf_inscal_climustr		6
exf_inscal_climvstr		6
exf_inscal_evap		6
exf_inscal_hflux		6
exf_inscal_lwdown		6
exf_inscal_lwflux		6
exf_inscal_precip		6
exf_inscal_runoff		8
exf_inscal_sflux		6
exf_inscal_sgrunoff		6
exf_inscal_snowprecip		6
exf_inscal_sss		4
exf_inscal_sst		4
exf_inscal_swdown		6
exf_inscal_swflux		6
exf_inscal_ustress		7
exf_inscal_uwind		7
exf_inscal_vstress		7
exf_inscal_vwind		7
exf_inscal_wspeed		6
exf_iprec		21
exf_iprec_obcs		14
exf_monFreq		7
EXF_NML_01		2
EXF_NML_02		2
EXF_NML_03		2
EXF_NML_04		2
EXF_NML_OBCS		2
EXF_NML_SGRUNOFF		2
exf_offset_atemp		5
exf_outscal_apressure		5
exf_outscal_hflux		6
exf_outscal_sflux		6
exf_outscal_sss		5
exf_outscal_sst		5
exf_outscal_swflux		5
exf_outscal_ustress		6
exf_outscal_vstress		6
exf_scal_BulkCdn		8
exf_verbose	print more messages to STDOUT (e.g., when read new rec)	6
exf_yftype		17
expMatrixWriteTime		5
expnam		4
externForcingCycle	Is the repeat time of the forcing (eg. 1 year)	26
externForcingPeriod	Is the period of which forcing varies (eg. 1 month)	25
F A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Symbol	Description	Uses
f0	Reference coriolis parameter ( 1/s )	27
facetEdgeLink	Face-Edge connectivity map:	5
FHDRAG		6
FHUM0		7
fields	List Output Fields	7
fileFlags		4
fileName	file which has been found	32
Filename1		8
Filename2		4
Filename3		4
Filename4		4
Filename5		4
fizhi_list		2
fizhi_mnc_read_pickup		5
fizhi_mnc_write_pickup		4
flamb	latent heat of evaporation [J/kg]	8
flami	latent heat of melting of pure ice [J/kg]	7
floats		3
flt_deltaT	time-step to step forward floats (in flt_runga2.F)	24
flt_file	name of the file containing the initial positions.	5
flt_int_prof	period between float vertical profiles, in s	6
flt_int_traj	period between storing model state at float position, in s	6
FLT_NML		2
flt_noise	range of noise added to the velocity component	34
fmin		26
fName	base name for file to read	365
forcing_In_AB	flag to put all forcings (Temp,Salt,Tracers,Momentum) contribution in (or out of) Adams-Bashforth time stepping.	5
forcingPrecond		28
fPrime	Second Coriolis parameter ( 1/s ), related to Y-component	8
fracEnFreez	fraction of energy going to lateral freezing (vs height increase)	9
fracEnMelt	fraction of energy going to lateral melting (vs height decrease)	12
FRACTIONAL_AREA		8
freefemax	max solubility of free iron (mol/m3)	7
freeSurfFac		24
frequency	Frequency (in s) of Output (ouput every frequency second)	10
FSTAB	Amplitude of stability correction (fraction)	14
FTEMP0		7
FWIND0	ratio of near-sfc wind to lowest-level wind	12
G A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Symbol	Description	Uses
gamma_blk	adiabatic lapse rate	17
gBaro	Accel. due to gravity used in barotropic equation ( m/s^2 )	11
gchem_ForcingCycle	periodic forcing parameter specific for gchem (seconds)	4
gchem_ForcingPeriod	periodic forcing parameter specific for gchem (seconds)	4
gchem_int1		4
gchem_int2		4
gchem_int3		4
gchem_int4		4
gchem_int5		4
GCHEM_PARM01		2
gchem_rl1		4
gchem_rl2		4
gchem_rl3		4
gchem_rl4		4
gchem_rl5		4
gencost_avgperiod		22
gencost_barfile		11
gencost_datafile		10
gencost_errfile		6
gencost_mask		5
gencost_name		20
gencost_scalefile		11
gencost_spmax		6
gencost_spmin		6
gencost_spzero		6
geoid_covariancefile		11
geoid_errfile		7
gfo_errfile		8
gfofile		17
gfointercept		9
gfoperiod		10
gfoslope		9
gfostartdate1		6
gfostartdate2		6
gfoTimeMaskFile		8
GGL90_PARM01		2
GGL90alpha		6
GGL90ceps		7
GGL90ck		6
GGL90diffMax		7
GGL90diffTKEh		12
GGL90dumpFreq		6
GGL90m2		6
GGL90mixingLengthMin		14
GGL90mixingMaps		5
GGL90taveFreq		7
GGL90TKEbottom		9
GGL90TKEFile		8
GGL90TKEmin		10
GGL90TKEsurfMin		6
GGL90viscMax		8
GGL90writeState		6
globalFiles	Selects between global and tiled files.	19
GM_AdvForm		24
GM_AdvSeparate		12
GM_background_K	Thickness diffusivity [m^2/s] (GM bolus transport)	14
GM_facTrL2dz	minimum Trans. Layer Thick. as a factor of local dz	7
GM_facTrL2ML	maximum Trans. Layer Thick. as a factor of Mix-Layer Depth	6
GM_InMomAsStress		12
GM_isopycK	Isopycnal diffusivity [m^2/s] (Redi-tensor)	20
GM_Kmin_horiz	minimum horizontal diffusivity [m^2/s]	7
GM_maxSlope	maximum slope (tapering/clipping) [-]	27
GM_maxTransLay	maximum Trans. Layer Thick. [m]	6
GM_MNC		10
GM_PARM01		2
GM_Scrit		10
GM_Sd		10
GM_slopeSqCutoff	slope^2 cut-off value	14
GM_Small_Number	epsilon used in computing the slope	25
GM_taper_scheme	select which tapering/clipping scheme to use	26
GM_Visbeck_alpha		18
GM_Visbeck_depth		8
GM_Visbeck_length		8
GM_Visbeck_maxSlope		9
GM_Visbeck_maxVal_K		5
GM_Visbeck_minDepth		5
GM_Visbeck_minVal_K		5
GMwxFile		9
GMwyFile		9
GMwzFile		9
gravity	Accel. due to gravity ( m/s^2 )	78
gravity_mks	gravitational acceleration [m/s^2]	7
gravitySign	indicates the direction of gravity relative to R direction	23
grdchk_eps		14
grdchk_nml		2
grdchkvarindex		180
grdchkwhichproc		27
groundAtK1	put the surface(k=1) at the ground (replaced by usingPCoords)	4
H A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Symbol	Description	Uses
hAlbIce	ice thickness for albedo transition: thin/thick ice albedo	6
hAlbSnow	snow thickness for albedo transition: snow/ground	12
hbf		6
HDRAG		6
HeatCapacity_Cp		31
HeffFile		10
hFacInf	Threshold (inf and sup) for fraction size of surface cell	13
hFacMin	Minimum fraction size of a cell (affects hFacC etc...)	10
hFacMinDp	Minimum dimensional size of a cell (affects hFacC etc..., Pa)	6
hFacMinDr	Minimum dimensional size of a cell (-> hFacC etc..., r units)	15
hFacMinDz	Minimum dimensional size of a cell (affects hFacC etc..., m)	6
hFacSup		7
hflux_errfile		10
hflux_exfremo_intercept		6
hflux_exfremo_slope		6
hfluxconst		5
hfluxfile		10
HfluxFile		2
hfluxmeanbarfile		10
hfluxperiod		8
hfluxstartdate1		5
hfluxstartdate2		5
hIceMin	Minimum ice thickness [m]	14
hiceMin		7
highOrderVorticity	use 3rd/4th order interp. of vorticity (V.I., advection)	13
hiMax	Maximum ice thickness [m]	11
hMixCriteria	criteria for mixed-layer diagnostic	11
hMixSmooth	Smoothing parameter for mixed-layer diag (default=0=no smoothing)	9
hMxL_default	default value for ocean MixLayer thickness [m]	6
hNewIceMax	new ice maximum thickness [m]	8
hNewSnowAge	new snow thickness that refreshes snow-age (by 1/e)	12
HO		10
HO_south		11
horizGridFile	File containing horizontal-grid definition	7
HsaltFile		8
hsMax	Maximum snow thickness [m]	8
HsnowFile		8
hSnowWetness	snow depth (m) corresponding to maximum wetness	9
ht	height of mean temperature	20
hThickIce	ice height below which fracEnMelt/Freez are applied [m]	13
hThinIce	ice height above which fracEnMelt/Freez are applied [m]	14
hu	height of mean wind	17
humid_fac	dry-air - water-vapor molecular mass ratio (minus one)	23
hybSigmFile	File containing hybrid-sigma vertical coord. coeff. (2x 1.D)	11
hydrogSaltFile	File containing initial hydrographic data (3-D)	16
hydrogThetaFile	File containing initial hydrographic data (3-D)	21
I A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Symbol	Description	Uses
i0swFrac	fraction of penetrating solar rad	6
ICE2WATR		13
ice_emissivity		15
IceAgeFile		8
ICEFile		4
ICEFRONT_PARM01		2
ICEFRONTdepthFile		6
ICEFRONTHeatCapacity_Cp		3
ICEFRONTheatTransCoeff		8
ICEFRONTkappa		5
ICEFRONTlatentHeat		9
ICEFRONTlengthFile		6
ICEFRONTsaltTransCoeff		8
ICEFRONTthetaSurface		6
iceMaskMax	maximum Ice fraction (=1 for no fractional ice)	9
iceMaskMin	mimimum Ice fraction (=1 for no fractional ice)	16
idep		12
idummy		5
iGloPos		6
iGloTile		5
IMAX_TICE		11
implicDiv2Dflow	parameter of the Crank-Nickelson time stepping :	30
implicitDiffusion	Turns implicit vertical diffusion on	32
implicitFreeSurface	Set to true to use implicit free surface	9
implicitIntGravWave	treat Internal Gravity Wave implicitly	28
implicitNHPress	parameter of the Crank-Nickelson time stepping :	22
implicitViscosity	Turns implicit vertical viscosity on	27
implicSurfPress	parameter of the Crank-Nickelson time stepping :	17
impMatrixWriteTime		5
inAdExact		5
integr_GeoPot	option to select the way we integrate the geopotential	15
iprint		32
ivdc_kappa	implicit vertical diffusivity for convection [m^2/s]	31
J A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Symbol	Description	Uses
jdep		12
jGloPos		6
jGloTile		6
K A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Symbol	Description	Uses
k0	light attentuation coefficient (1/m)	7
kapgm_errfile		6
kapredi_errfile		6
KDOPRemin	DOP remineralization rate (1/s) = 1/(6 month)	5
KFE	half saturation fe constant (mol/m3)	6
kGloPos		5
kIce	thermal conductivity of pure ice [W/m/K]	10
KPO4	half saturation phosphate constant (mol/m3)	6
KPP_DiffSFile		9
kpp_dumpFreq		5
kpp_freq		5
KPP_ghatFile		4
KPP_ghatKFile		9
KPP_ghatUseTotalDiffus		9
KPP_PARM01		2
kpp_taveFreq		4
KPPmixingMaps		4
KPPuseDoubleDiff		6
KPPwriteState		8
KRemin	remin power law coeff	5
KScav	iron scavenging rate QQ	8
kSnow	thermal conductivity of snow [W/m/K]	7
ksolar	bulk solar abs coeff of sea ice [m^-1]	6
L A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Symbol	Description	Uses
LAD		8
lambdaSaltFile		8
lambdaThetaFile		8
lambdaThetaZonRelax		6
land_calc_alb	compute albedo of snow over land	6
land_calc_grT	step forward ground Temperature	13
land_calc_grW	step forward soil moiture	11
land_calc_snow	step forward snow thickness	13
land_CpWater	Heat capacity of water (J/kg/K)	14
land_deltaT	land model time-step	33
land_diagFreq	Frequency^-1 for diagnostic output (s)	7
land_dzF	layer thickness	18
land_fractRunOff	fraction of water in excess which run-off (1)	6
land_grdLambda	Thermal conductivity of the ground (W/m/K)	7
land_grT_iniFile	File containing initial ground Temp.	8
land_grW_iniFile	File containing initial ground Water.	9
land_heatCs	Heat capacity of dry soil (J/m3/K)	11
land_hMaxSnow	Maximum snow-thickness (m)	6
land_impl_grT	solve ground Temperature implicitly	13
land_Lfreez	Latent heat of freezing (J/kg)	20
LAND_MODEL_PAR		2
land_mon_mnc		11
land_monFreq	Frequency^-1 for monitor output (s)	7
land_oldPickup	restart from an old pickup (= before checkpoint 52l_pre)	6
LAND_PHYS_PAR		2
land_pickup_read_mnc		11
land_pickup_write_mnc		11
land_rhoLiqW	density of liquid water (kg/m3)	19
land_rhoSnow	density of snow (kg/m3)	14
land_snapshot_mnc		11
land_snow_iniFile	File containing initial snow thickness.	7
land_taveFreq	Frequency^-1 for time-Aver. output (s)	9
land_timeave_mnc		11
land_waterCap	field capacity per meter of soil (1)	12
land_wTauDiff	soil moisture diffusion time scale (s)	6
latBandClimRelax	latitude band where Relaxation to Clim. is applied,	24
LAYER_nb		8
layers_diagFreq		5
layers_G	boundaries of isopycnal layers	25
LAYERS_PARM01		2
layers_taveFreq		7
levels	List Output Levels	8
Lfresh	latent heat of melting of pure ice [J/kg]	38
ligand_stab	ligand-free iron stability constant (m3/mol)	14
ligand_tot	total free ligand (mol/m3)	12
LimitHblStable		5
linFSConserveTr	Set to true to correct source/sink of tracer	9
lit0	half saturation light constant (W/m2)	6
LONGSTEP_PARM01		2
LongwaveFile		7
LS_nIter	number of dynamics time steps between ptracer steps	16
LS_whenToSample	when to sample dynamical fields for the longstep average	10
LSR_ERROR		11
Lvap	latent heat of vaporization at 0.oC [J/kg]	11
lwdown_errfile		6
lwdown_exfremo_intercept		5
lwdown_exfremo_slope		5
lwdownconst		5
lwdownfile		10
lwdownperiod		8
lwdownstartdate1		5
lwdownstartdate2		5
lwflux_errfile		6
lwflux_exfremo_intercept		5
lwflux_exfremo_slope		5
lwfluxconst		5
lwfluxfile		10
lwfluxperiod		8
lwfluxstartdate1		5
lwfluxstartdate2		5
M A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Symbol	Description	Uses
maskIniSalt	apply mask to initial salinity	6
maskIniTemp	apply mask to initial Pot.Temp.	6
maskname		5
MATRIX_PARM01		2
MAX_ABE_ITERATIONS		6
MAX_FRACTIONAL_AREA		6
MAX_HEFF		8
MAX_TICE		10
maxLengthPrt1D	maximum length for printing (to Std-Msg-Unit) 1-D array	7
mdsioLocalDir	read-write tiled file from/to this directory name	50
meridWindFile	File containing meridional wind data	15
metaname		5
metricTerms	Flag which turns metric terms on or off.	12
MIN_ATEMP		12
MIN_LWDOWN		10
MIN_TICE		8
minKPPhbl		7
missing_value	missing value for real-type fields in output file	5
missing_value_int	missing value for integers in output	5
MNC_01		2
mnc_echo_gvtypes	echo type names (fails on many platforms)	4
mnc_filefreq		8
mnc_indir_str	name of the input directory	5
mnc_max_fsize	maximum file size	4
mnc_outdir_date	use a date string within the output dir name	6
mnc_outdir_num	use a seq. number within the output dir name	5
mnc_outdir_str	name of the output directory	9
mnc_read_bathy		6
mnc_read_salt		5
mnc_read_theta		5
mnc_use_indir	use mnc_indir_str as input filename prefix	4
mnc_use_name_ni0	use nIter0 in all the file names	4
mnc_use_outdir	use mnc_outdir_str as output filename prefix	5
momAdvection	Flag which turns advection of momentum on and off.	18
momDissip_In_AB	if False, put Dissipation tendency contribution	10
momForcing	Flag which turns external forcing of momentum on	12
momForcingOutAB	=1: take momentum forcing contribution	14
momImplVertAdv	Turns on implicit vertical advection for Momentum	13
momPressureForcing	Flag which turns pressure term in momentum equation	12
momStepping	Turns momentum equation time-stepping off	34
momViscosity	Flag which turns momentum friction terms on and off.	34
monitor_mnc		16
monitorFreq		29
monitorSelect	select group of variables to monitor	12
mu_Tf	linear dependance of melting temperature on Salinity [oC/psu]	10
mult_ageos		6
mult_apressure		4
mult_aqh		5
mult_argos		6
mult_argot		6
mult_atemp		5
mult_atl		6
mult_bottomdrag		5
mult_bp		5
mult_ctds		6
mult_ctdsclim		6
mult_ctdt		6
mult_ctdtclim		6
mult_curmtr		5
mult_diffkr		5
mult_drift		6
mult_edtau		5
mult_ers		5
mult_evap		4
mult_gencost		6
mult_gfo		5
mult_h		6
mult_hflux		6
mult_hfluxmm		6
mult_hmean		6
mult_ice		5
mult_ice_export		5
mult_kapgm		5
mult_kapredi		5
mult_lwdown		4
mult_lwflux		4
mult_obcse		6
mult_obcsn		6
mult_obcss		6
mult_obcsvol		4
mult_obcsw		6
mult_precip		5
mult_profiles		5
mult_salt		6
mult_salt0		6
mult_scatx		6
mult_scaty		6
mult_sdrift		6
mult_sflux		6
mult_sfluxmm		6
mult_smooth_bc		15
mult_smooth_ic		6
mult_smrarea		7
mult_smrsss		6
mult_smrsst		6
mult_snowprecip		4
mult_sshv4cost		5
mult_sss		8
mult_sst		9
mult_swdown		5
mult_swflux		5
mult_tauu		6
mult_tauv		6
mult_tdrift		6
mult_temp		6
mult_temp0		6
mult_test		5
mult_tmi		8
mult_tp		5
mult_tracer		5
mult_transp		5
mult_usercost		5
mult_uwind		5
mult_vwind		5
mult_wdrift		5
mult_xbt		6
multEtan		4
multiDimAdvection	Flag that enable multi-dimension advection	10
multSalt		4
multTheta		4
multUvel		4
multVvel		4
mxlMaxFlag		9
MY_PARM01		2
MYdiffMax		6
MYdumpFreq		5
MYhblScale		5
MYMixingMaps		2
myPa_applyTendS		6
myPa_applyTendT		7
myPa_applyTendU		7
myPa_applyTendV		7
myPa_doSwitch1		4
myPa_doSwitch2		4
myPa_index1		5
myPa_index2		4
myPa_MNC		8
myPa_param1		5
myPa_param2		4
myPa_Scal1File		6
myPa_Scal2File		6
myPa_StaV_Cgrid		9
myPa_string1		5
myPa_string2		4
myPa_Surf1File		6
myPa_Surf2File		6
myPa_Tend_Cgrid		9
myPa_VelUFile		7
myPa_VelVFile		7
MYPACKAGE_PARM01		2
MYtaveFreq		6
MYviscMax		6
MYwriteState		8
N A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Symbol	Description	Uses
nbeg		17
nend		11
nEndIter		26
nfunc		20
nh_Am2	scales the non-hydrostatic terms and changes internal scales	9
nhmsbegin		3
nIter0	Start time-step number of for this run	306
nitMaxTsf	maximum Nb of iter to find Surface Temp (Trsf)	8
no_slip_bottom	Impose no-slip at bottom boundary.	10
no_slip_shelfice		6
no_slip_sides	Impose no-slip at lateral boundaries.	14
nondimcontrol		6
noNegativeEvap	prevent negative evaporation (= sea-surface condensation)	6
nonHydrostatic	Using non-hydrostatic algorithm	52
nonlinFreeSurf	option related to non-linear free surface	67
Npower		7
NPSEUDOTIMESTEPS		14
Nr	No. points in Z for full process domain.	3887
nSetRegMskFile		11
nShapS		13
nShapT		14
nShapTrPhys		7
nShapUV		26
nShapUVPhys		10
nstep		9
nstyperelax		2
nsubtime	number of chemistry timesteps per deltaTtracer	4
nTimeSteps	Number of timesteps to execute	89
nttyperelax		2
nTx		64
nTy		63
num_m_smooth_sh		4
num_v_smooth_BV		4
num_v_smooth_Ri		5
num_z_smooth_sh		4
numbands		1
numiter		9
nupdate		26
nvars		7
nymdbegin		3
O A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Symbol	Description	Uses
O2crit	critical oxygen level (mol/m3)	6
OB_Ieast	global index array of eastern open-boundary point	11
OB_Iwest	global index array of western open-boundary point	8
OB_Jnorth	global index array of northern open-boundary point	11
OB_Jsouth	global index array of southern open-boundary point	8
OBCS_PARM01		2
OBCS_PARM02		2
OBCS_PARM03		2
OBCS_PARM04		2
obcsEperiod		7
obcsEstartdate1		6
obcsEstartdate2		6
obcsglo		5
obcsNperiod		7
obcsNstartdate1		6
obcsNstartdate2		6
obcsSperiod		7
obcsSstartdate1		6
obcsSstartdate2		6
obcsWperiod		7
obcsWstartdate1		6
obcsWstartdate2		6
OBEaFile		4
OBEetaFile		11
OBEhFile		4
OBEsFile		11
OBEslFile		4
OBEsnFile		4
OBEtFile		11
OBEuFile		11
OBEuiceFile		4
OBEvFile		11
OBEviceFile		4
OBEwFile		11
OBLIQ	Obliquity (in degree) used with ALLOW_INSOLATION	7
OBNaFile		4
OBNetaFile		11
OBNhFile		4
OBNsFile		11
OBNslFile		4
OBNsnFile		4
OBNtFile		11
OBNuFile		11
OBNuiceFile		4
OBNvFile		11
OBNviceFile		4
OBNwFile		11
OBSaFile		4
OBSetaFile		11
OBShFile		4
OBSsFile		11
OBSslFile		4
OBSsnFile		4
OBStFile		11
OBSuFile		11
OBSuiceFile		4
OBSvFile		11
OBSviceFile		4
OBSwFile		11
OBWaFile		4
OBWetaFile		11
OBWhFile		4
OBWsFile		11
OBWslFile		4
OBWsnFile		4
OBWtFile		11
OBWuFile		11
OBWuiceFile		4
OBWvFile		11
OBWviceFile		4
OBWwFile		11
ocean_deltaT	ocean mixed-layer time-step [s]	12
OCEAN_drag		15
ocean_emissivity		18
OFFLINE_PARM01		2
OFFLINE_PARM02		2
offlineForcingCycle		6
offlineForcingPeriod		6
offlineIter0		32
offlineLoadPrec		5
offlineOffsetIter		5
omega	Angular velocity ( rad/s )	14
OPPS_PARM01		2
OPPSdebugLevel		12
OPPSdumpFreq		4
OPPStaveFreq		6
OPPSwriteState		4
OPTIM		1
optim		3
optimcycle		912
outputTypesInclusive		41
P A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Symbol	Description	Uses
Pa2Atm	Conversion factor for atmospheric pressure pLoad (when coupled	6
PACKAGES		2
parfrac	fraction of Qsw that is PAR	7
PARM01		2
PARM01_ATM2D		2
PARM02		2
PARM02_ATM2D		2
PARM03		2
PARM03_ATM2D		2
PARM04		2
PARM04_ATM2D		2
PARM05		2
PARM05_ATM2D		2
pChkPtFreq	Frequency of permanent check pointing ( s ).	13
periodicExternalForcing	Set true if forcing is time-dependant	10
permil	set carbon mol/m3 <---> mol/kg conversion factor	30
phepsi		25
phiEuler	Euler angle, rotation about original z-axis	7
phiMin	unfortunate variable name ; replaced by ygOrigin	4
pickup_read_mnc	use mnc to read pickups	14
pickup_write_mnc	use mnc to write pickups	15
pickupStrictlyMatch	check and stop if pickup-file do not stricly match	27
pickupSuff	force to start from pickup files (even if nIter0=0)	50
ploadFile		4
PlumeMethod		8
PlumeRadius		8
PP81_PARM01		2
PPalpha		8
PPdiffMin		5
PPdumpFreq		5
PPMixingMaps		2
PPnRi		7
PPnu0		6
PPtaveFreq		6
PPviscMax		7
PPviscMin		5
PPwriteState		5
precip_errfile		6
precip_exfremo_intercept		5
precip_exfremo_slope		5
precipconst		5
precipFile		7
precipfile		9
precipperiod		8
precipstartdate1		5
precipstartdate2		5
preDefTopol	pre-defined Topology selector: = 0 : topology defined from processing data.exch2 ; = 1 : simple, single facet topology; = 2 : customized topology (w2_set_myown_facets) = 3 : 6-face Cube (3 face-dims: nRed, nGreen, nBlue).	15
printMapIncludesZeros	Flag that controls whether character constant	7
profiles_nml		2
profilesfiles		8
psbarfile		16
psiEuler	Euler angle, rotation about new z-axis	7
psim_fac	coef used in turbulent fluxes calculation [-]	11
PSMIN		8
pSurfInitFile		8
PTRACERS_addSrelax2EmP	add Salt relaxation to EmP	8
PTRACERS_advScheme		24
PTRACERS_diffK4		6
PTRACERS_diffKh		6
PTRACERS_diffKr		5
PTRACERS_diffKrNr		9
PTRACERS_dumpFreq		9
PTRACERS_EvPrRn	tracer concentration in Rain, Evap & RunOff	29
PTRACERS_ImplVertAdv		11
PTRACERS_initialFile		6
PTRACERS_Iter0	timestep number when tracers are initialized	18
PTRACERS_long_names		9
PTRACERS_monitor_mnc		11
PTRACERS_monitorFreq		7
PTRACERS_names		20
PTRACERS_numInUse		101
PTRACERS_PARM01		2
PTRACERS_pickup_read_mnc		12
PTRACERS_pickup_write_mnc		12
PTRACERS_ref	vertical profile for passive tracers, in	10
PTRACERS_snapshot_mnc		11
PTRACERS_taveFreq	Frequency with which time-averaged PTRACERS	10
PTRACERS_timeave_mnc		12
PTRACERS_units		8
PTRACERS_useDWNSLP	true if Down-Sloping flow applies to pTracer n	7
PTRACERS_useGMRedi		11
PTRACERS_useKPP		10
PTRACERS_useRecords		7
Q A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Symbol	Description	Uses
QACL1		8
QACL2		8
QBL		6
qnet_off		4
qnetFile		7
QnetFile		8
QSMAX		6
qsnow	snow enthalpy [J/kg]	14
quasiHydrostatic	Using non-hydrostatic terms in hydrostatic algorithm	10
R A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Symbol	Description	Uses
R_CP	stochiometric ratios	8
R_FeP		6
R_NP		6
R_OP	stochiometric ratios	4
RainFile		7
rainRatioUniform		6
rband		8
RBCS_PARM01		2
RBCS_PARM02		2
rbcsForcingCycle	cycle of rbc data (in seconds)	8
rbcsForcingOffset	model time at beginning of first rbc period	6
rbcsForcingPeriod	period of rbc data (in seconds)	9
rbcsIniter		5
rbcsIter0	singleTimeFile iteration number corresponding to rbcsForcingOffset	6
rbcsSingleTimeFiles	if .TRUE., rbc fields are given 1 file per time labeled by iteration number (see rbcsIter0,deltaTrbcs)	8
RC_maxtime_hr		7
RC_maxtime_mi		8
RC_maxtime_sc		7
rCD	CD scheme normalised coupling parameter (= 1 - deltaT/tauCD)	12
readBinaryPrec	Precision used for reading binary files	79
readgrid_mnc	read INI_CURVILINEAR_GRID() info using mnc	5
readStressOnAgrid	read wind-streess located on model-grid, A-grid position	8
readStressOnCgrid	read wind-streess located on model-grid, C-grid position	9
recglo		5
regrid_fbname_in		3
regrid_MDSIO		3
regrid_MNC		3
regrid_ngrids		5
regrid_nout		4
REGRID_PARM01		2
relaxMaskFile		6
relaxPtracerFile		10
relaxSFile		11
relaxTFile		11
repeatCycle	number of averaging intervals in 1 cycle	7
repeatPeriod		11
Rgas	gas constant for dry air [J/kg/K]	6
RHBL		6
RHCL1		9
RHCL2		6
RHGRAD		7
RHIL		6
RHLSC		6
rhoA	density of air [kg/m^3]	8
rhoa		16
rhoConst	Vertically constant reference density	48
rhoConstFresh	Constant reference density for fresh water (rain)	43
rhoFW	density of fresh water [kg/m^3]	8
rhofw	density of fresh water [kg/m^3]	12
rhoi	density of ice [kg/m^3]	58
rhoIcefront		5
rhonil		14
rhoRefFile	File containing reference density profile rhoRef (1.D)	11
rhos	density of snow [kg/m^3]	35
rhoShelfice		4
rhosw	density of seawater [kg/m^3]	12
Ricr		7
rigidLid	Set to true to use rigid lid	22
Riinfty		6
rkFac	removed from namelist ; replaced by -rkSign	4
Ro_SeaLevel	standard position of Sea-Level in R coordinate, used as	12
rotationPeriod	Rotation period (s) (= 2.pi/omega)	9
Rrho0		6
rSigmaBnd	vertical position (in r-unit) of r/sigma transition (Hybrid-Sigma)	7
rSphere	Radius of sphere for a spherical polar grid ( m ).	48
RUNCLOCK		2
runlength		7
runoff_exfremo_intercept		6
runoff_exfremo_slope		6
runoffconst		6
runoffFile		8
RunoffFile		13
runofffile		11
runoffMapFile		6
runoffperiod		10
runoffstartdate1		5
runoffstartdate2		5
S A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Symbol	Description	Uses
S_winton	Winton salinity of ice [g/kg]	6
SadournyCoriolis	for backward compatibility	4
salt0errfile		10
salt_addMass	salinity of addMass array	11
salt_EvPrRn	salinity of Rain & Evap.	18
SALT_PLUME_PARM01		2
salt_useDWNSLP	true if Down-Sloping flow applies to salinity	6
saltAdvection	Flag which turns advection of salinity on and off.	14
saltAdvScheme	Salt. Horiz.advection scheme selector	27
saltClimFile	File containing surface salt climataology used	16
saltDiffusion	diffusion of salinity on/off (flag not used)	4
salterrfile		10
SaltFile		3
saltFluxFile	File containing surface salt flux	12
saltForcing	Flag which turns external forcing of salinity on	9
saltIce	salinity of ice [g/kg]	10
saltImplVertAdv	Turns on implicit vertical advection for Salinity	14
SaltPlumeCriterion		11
SaltPlumeSouthernOcean		5
saltQsFac	reduction of sat. vapor pressure over salty water	6
saltRelaxFile		9
saltsat	reduction of saturation vapor pressure over salt water	6
saltStepping	Turns salinity equation time-stepping off	25
saltVertAdvScheme	Salt. Vert. Advection scheme selector	14
sbarfile		38
sBeta	Linear EOS haline contraction coefficient.	13
SBO_PARM01		2
sbo_taveFreq	SBO time-averaging frequency (s)	7
scale_runoff		5
scalname		6
scatperiod		4
scatstartdate1		8
scatstartdate2		8
scatx_errfile		7
scatxdatfile		9
scaty_errfile		7
scatydatfile		9
SDALB		8
sdatfile		7
SEAICE_airTurnAngle		12
SEAICE_availHeatFrac		13
SEAICE_availHeatFracFrz		12
SEAICE_clamp_salt		5
SEAICE_clamp_theta		5
SEAICE_clipVelocities	clip velocities to +/- 40cm/s	10
SEAICE_cpAir		12
SEAICE_dalton		15
SEAICE_deltaTdyn		25
SEAICE_deltaTevp		24
SEAICE_deltaTtherm		75
SEAICE_drag		13
SEAICE_drag_south		14
SEAICE_dryIceAlb		10
SEAICE_dryIceAlb_south		11
SEAICE_drySnowAlb		10
SEAICE_drySnowAlb_south		11
SEAICE_dump_mnc	write snap-shot output using MNC	10
SEAICE_dumpFreq		10
SEAICE_eccen		11
SEAICE_elasticParm		9
SEAICE_emissivity		11
SEAICE_EPS		21
SEAICE_EPS_SQ		18
SEAICE_evpDampC		10
SEAICE_evpTauRelax		12
SEAICE_freeze		11
SEAICE_gamma_t		12
SEAICE_gamma_t_frz		10
SEAICE_iceConduct		8
SEAICE_initialHEFF		8
SEAICE_latentIce		4
SEAICE_latentWater		4
SEAICE_lhEvap		10
SEAICE_lhFusion		10
SEAICE_lhSublim		10
SEAICE_maskRHS	mask the RHS of the solver where there is no ice	8
SEAICE_mon_mnc	write monitor to netcdf file	11
SEAICE_monFreq		9
SEAICE_no_slip	apply no slip boundary conditions to seaice velocity	9
SEAICE_PARM01		2
SEAICE_PARM02		2
SEAICE_rhoAir		21
SEAICE_rhoIce		22
SEAICE_rhoSnow		16
SEAICE_salinity		9
SEAICE_sensHeat		4
SEAICE_shortwave		9
SEAICE_snowConduct		9
SEAICE_snowThick		9
SEAICE_strength		11
SEAICE_tave_mnc	write TimeAverage output using MNC	10
SEAICE_taveFreq		12
SEAICE_waterAlbedo		9
SEAICE_waterDrag		18
SEAICE_waterDrag_south		19
SEAICE_waterTurnAngle		16
SEAICE_wetIceAlb		10
SEAICE_wetIceAlb_south		11
SEAICE_wetSnowAlb		10
SEAICE_wetSnowAlb_south		11
SEAICE_zetaMaxFac		10
SEAICE_zetaMin		12
SEAICEadvAge	turn on advection of ice age (does not work with	13
SEAICEadvArea	turn on advection of fraction area	18
SEAICEadvHeff	turn on advection of effective thickness	17
SEAICEadvSalt	turn on advection of salt (does not work with	15
SEAICEadvSchAge		19
SEAICEadvSchArea		23
SEAICEadvScheme		16
SEAICEadvSchHeff		23
SEAICEadvSchSalt		20
SEAICEadvSchSnow		20
SEAICEadvSnow	turn on advection of snow (does not work with	14
SEAICErestoreUnderIce	restore surface T/S also underneath ice	9
SEAICEstressFactor		12
SEAICEuseDYNAMICS		14
SEAICEuseEVPpickup		7
SEAICEuseFlooding	turn on scheme to convert submerged snow into ice	12
SEAICEuseFluxForm	use flux form for advection and diffusion	9
SEAICEuseFREEDRIFT		12
SEAICEuseMetricTerms	use metric terms for dynamics solver	9
SEAICEuseTEM		10
SEAICEwriteState		8
SEGRAD		6
select_rStar	option related to r* vertical coordinate	56
select_ZenAlbedo	switch to different methods to compute albedo (direct part) 0 just use exf_albedo 1 use daily mean albedo from exf_zenithangle_table.F 2 use daily mean albedo computed as in pkg/aim_v23 3 use daily variable albedo	16
selectAddFluid	option to add mass source/sink of fluid in the interior	26
selectCoriMap	select setting of Coriolis parameter map:	17
selectFindRoSurf	select the way surf. ref. pressure (=Ro_surf) is	14
selectKEscheme	Kinetic Energy scheme selector (Vector Inv.)	12
selectNHfreeSurf	option for Non-Hydrostatic (free-)Surface formulation:	21
selectSigmaCoord	option related to sigma vertical coordinate	24
selectVortScheme	Scheme selector for Vorticity term (Vector Inv.)	30
set_regMask	region-mask set-index that define the region n	5
sflux_errfile		10
sflux_exfremo_intercept		6
sflux_exfremo_slope		6
sfluxconst		5
sfluxfile		10
SfluxFile		2
sfluxmeanbarfile		11
sfluxperiod		8
sfluxstartdate1		5
sfluxstartdate2		5
sgrunoff_exfremo_intercept		5
sgrunoff_exfremo_slope		5
sgrunoffconst		5
sgrunoffperiod		7
sgrunoffstartdate		9
sgrunoffstartdate1		5
sgrunoffstartdate2		5
Shap_alwaysExchTr	always call exch(Tracer) nShapTr times	9
Shap_alwaysExchUV	always call exch(U,V) nShapUV times	10
Shap_diagFreq	Frequency^-1 for diagnostic output (s)	8
shap_filt_TrStagg	if using a Stagger time-step, filter T,S before	5
shap_filt_uvStar	filter applied to u*,v* (before SOLVE_FOR_P)	9
Shap_funct	define which Shapiro Filter function is used	44
Shap_noSlip	No-slip parameter (=0 free sleep ; =1 No-slip)	8
SHAP_PARM01		2
Shap_TrLength	Length scale for tracer filter	9
Shap_Trtau	Time scale for tracer filter	11
Shap_uvLength	Length scale for momentum filter	11
Shap_uvtau	Time scale for momentum filter	22
SHELFICE_dump_mnc		7
SHELFICE_dumpFreq		5
SHELFICE_PARM01		2
SHELFICE_tave_mnc		7
SHELFICE_taveFreq		7
SHELFICEboundaryLayer		4
SHELFICEconserve		7
SHELFICEDragLinear		5
SHELFICEDragQuadratic		5
shelfIceFile	File containing the topography of the shelfice draught	4
SHELFICEHeatCapacity_Cp		4
SHELFICEheatTransCoeff		10
SHELFICEkappa		6
SHELFICElatentHeat		10
SHELFICEloadAnomalyFile		6
SHELFICEsaltTransCoeff		11
SHELFICEthetaSurface		8
SHELFICEtopoFile		6
SHELFICEwriteState		5
sideDragFactor	side-drag scaling factor (used only if no_slip_sides)	12
siobEperiod		8
siobEstartdate1		7
siobEstartdate2		7
siobNperiod		8
siobNstartdate1		7
siobNstartdate2		7
siobSperiod		8
siobSstartdate1		7
siobSstartdate2		7
siobWperiod		8
siobWstartdate1		7
siobWstartdate2		7
SIsal0		7
SMF		6
smooth2D_Lx0		6
smooth2D_Ly0		6
smooth2Dfilter		7
smooth2Dnbt		8
smooth2Dsize		5
smooth2Dtype		7
smooth3D_Lx0		6
smooth3D_Ly0		6
smooth3D_Lz0		6
smooth3Dfilter		7
smooth3Dnbt		8
smooth3DsizeH		5
smooth3DsizeZ		6
smooth3DtypeH		6
smooth3DtypeZ		6
smooth_nml		2
smoothAbsFuncRange	1/2 of interval around zero, for which FORTRAN ABS	14
smrarea_errfile		6
smrareabarfile		12
smrareadatfile		9
smrareaperiod		3
smrareastartdate1		5
smrareastartdate2		5
smrsssbarfile		9
smrsstbarfile		9
sMxL_default	default value for salinity in MixLayer [psu]	9
snapshot_mnc		25
snow_emissivity		15
snowAgTime	snow aging time scale [s]	6
snowprecip_errfile		6
snowprecip_exfremo_intercept		5
snowprecip_exfremo_slope		5
snowprecipconst		5
snowprecipfile		7
snowprecipperiod		7
snowprecipstartdate1		5
snowprecipstartdate2		5
SolarFile		17
SOLC		17
SOLV_MAX_ITERS		11
SOLV_NCHECK		13
spongeThickness	number grid points that make up the sponge layer (def=0)	100
SPovershoot		6
sRef	reference vertical profile for salinity/specific humidity	47
sRefFile	File containing reference salinity/spec.humid. sRef (1.D)	9
SrelaxStevens	relaxation time scale (in seconds) for T/S-points use phase velocity contribution for open boundary use advective contribution for open boundary	6
ssh_errfile		8
sshv4cost_errfactor		5
sshv4cost_errfile		6
sshv4cost_scalefile		9
sssdatfile		8
ssserrfile		7
sssstartdate1		6
sssstartdate2		6
sstbarfile		11
sstdatfile		9
ssterrfile		7
sstExtrapol	extrapolation coeff from 1rst 2 levels up to surface	9
sststartdate1		6
sststartdate2		6
STABILITY_THRESHOLD		8
staggerTimeStep	enable a Stagger time stepping U,V (& W) then T,S	34
startDate		4
startDate_1		7
startDate_2		7
startFromPickupAB2	with AB-3 code, start from an AB-2 pickup	8
startIceModel	=1 : start ice model at nIter0 ; =0 : use pickup files -1 : start from a small pickup (without Mix.Layer)	7
startTime	Starting time for this integration ( s ).	147
startYear		7
stat_fields	List of statistics output Fields	7
stat_fname		9
stat_freq	Frequency (in s) of statistics output	7
stat_phase	phase (in s) to write statistics output	5
stat_region	List of statistics output Regions	4
stefan	Stefan-Boltzmann constant [W/m^2/K^4]	27
stepFwd_oceMxL	step forward mixed-layer T & S (slab-ocean)	18
stressReduction	reduction factor for wind-stress under sea-ice [0-1]	19
surfQfile	File containing surface heat flux, excluding SW	4
surfQnetFile	File containing surface net heat flux	12
surfQswFile	File containing surface shortwave radiation	12
SWCAP		9
swdown_errfile		6
swdown_exfremo_intercept		5
swdown_exfremo_slope		5
swdownconst		5
swdownfile		10
swdownperiod		10
swdownstartdate1		5
swdownstartdate2		5
swflux_errfile		6
swflux_exfremo_intercept		5
swflux_exfremo_slope		5
swfluxconst		5
swfluxfile		10
swfluxperiod		8
swfluxstartdate1		5
swfluxstartdate2		5
SWWIL		9
T A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Symbol	Description	Uses
tAlpha	Linear EOS thermal expansion coefficient ( 1/degree ).	15
tauCD	CD scheme coupling timescale ( s )	9
tauRelax_MxL	Relaxation time scale for MixLayer T [s]	9
tauRelax_MxL_salt	Relaxation time scale for MixLayer S [s]	9
tauRelaxPTR		6
tauRelaxS		6
tauRelaxT		6
tauSaltClimRelax	Relaxation to climatology time scale ( s ).	11
tauSaltClimRelax3Dim	replaced by pkg/rbcs (3.D Relaxation B.Cs)	4
tauSaltRelax		5
tauThetaClimRelax	Relaxation to climatology time scale ( s ).	11
tauThetaClimRelax3Dim	replaced by pkg/rbcs (3.D Relaxation B.Cs)	4
tauThetaRelax		5
tauThetaZonRelax		6
tauTr1ClimRelax	old parameter (will be removed 1 day)	5
tauu_errfile		10
tauuFile		7
tauv_errfile		10
tauvFile		7
tauxbarfile		12
tauybarfile		12
tave_lastIter	(for state variable only) fraction of the last time	6
taveDump		8
taveFreq	Frequency with which time-averaged model state	40
tbarfile		42
tCylIn	Temperature of the inner boundary of the cylinder	5
tCylOut	Temperature of the outer boundary cylinder	5
tdatfile		7
temp0errfile		10
temp_addMass	temperature of addMass array	11
temp_EvPrRn	temperature of Rain & Evap.	18
temp_useDWNSLP	true if Down-Sloping flow applies to temperature	6
tempAdvection	Flag which turns advection of temperature on and off.	14
tempAdvScheme	Temp. Horiz.Advection scheme selector	25
tempDiffusion	diffusion of temperature on/off (flag not used)	4
temperrfile		10
tempForcing	Flag which turns external forcing of temperature on	9
tempImplVertAdv	Turns on implicit vertical advection for Temperature	14
tempSnowAlb	temperature transition from ColdSnow to WarmSnow Alb. [oC]	7
tempSnowAlbL	temperature transition from ColdSnow to WarmSnow Alb. (oC)	7
tempStepping	Turns temperature equation time-stepping off	26
tempVertAdvScheme	Temp. Vert. Advection scheme selector	14
Terrmax	Temperature convergence criteria [oC]	7
Tf0kel	Freezing temp of fresh water in Kelvin = 273.15	13
the_run_name	string identifying the name of the model run	24
TheCalendar		4
thetaClimFile	File containing surface theta climataology used	16
thetaEuler	Euler angle, rotation about new x-axis	7
thetaMin	unfortunate variable name ; replaced by xgOrigin	4
thetaRelaxFile		9
ThetFile		4
thSIce_calc_albNIR	calculate Near Infra-Red Albedo	6
THSICE_CONST		2
thSIce_deltaT	ice model time-step, seaice thicken/extend [s]	45
thSIce_diagFreq	Frequency^-1 for diagnostic output [s]	7
thSIce_diffK	thickness (horizontal) diffusivity [m^2/s]	10
thSIce_dtTemp	ice model time-step, solve4temp [s]	7
thSIce_mon_mnc	write monitor to netcdf file	7
thSIce_monFreq	Frequency^-1 for monitor output [s]	8
THSICE_PARM01		2
thSIce_pickup_read_mnc	pickup read w/ MNC	5
thSIce_pickup_write_mnc	pickup write w/ MNC	9
thSIce_snapshot_mnc	write snap-shot output using MNC	7
thSIce_tave_mnc	write TimeAverage output using MNC	7
thSIce_taveFreq	Frequency^-1 for time-Aver. output [s]	8
thSIceAdvScheme	thSIce Advection scheme selector	20
thSIceEnthp_InitFile	File name for initial ice enthalpy	8
thSIceFract_InitFile	File name for initial ice fraction	6
thSIceSnowA_InitFile	File name for initial snow Age	6
thSIceSnowH_InitFile	File name for initial snow thickness	6
thSIceThick_InitFile	File name for initial ice thickness	6
thSIceTsurf_InitFile	File name for initial surf. temp	6
timeave_mnc		16
timePhase	phase (in s) within the frequency period to write output	5
timeSnowAge	snow aging time scale (s)	6
tIter0	retired parameter	4
tmidatfile		8
tmistartdate1		6
tmistartdate2		6
topexfile		17
topexintercept		9
topexmeanfile		7
topexperiod		10
topexslope		9
topexstartdate1		6
topexstartdate2		6
topoFile	File containing the topography of the surface (unit=m)	12
tp_errfile		8
tpTimeMaskFile		8
trac_EvPrRn	tracer conc. in Rain & Evap (old passive tracer code)	4
tracerAdvScheme	tracer advection scheme (old passive tracer code)	4
tracForcingOutAB	=1: take tracer (Temp,Salt,pTracers) forcing contribution	18
TRCNV		6
tRef	reference vertical profile for potential temperature	68
tRefFile	File containing reference Potential Temperat. tRef (1.D)	9
TrelaxStevens		6
TRFile		5
TRLSC		6
TRSHC		6
TRVDI		7
TRVDS		6
twoDigitYear	when set, use 2-digit year extension YR	24
U A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Symbol	Description	Uses
ubarfile		27
udrifterrfile		5
udriftfile		5
umax		5
umin	minimum wind speed used in bulk-formulae [m/s]	22
uniformLin_PhiSurf	Set to true to use a uniform Bo_surf in the	9
upwindShear	use 1rst order upwind interp. (V.I., vertical advection)	9
upwindVorticity	bias interpolation of vorticity in the Coriolis term	15
Urelaxobcsbound		12
Urelaxobcsinner		12
use3dCoriolis	Turns the 3-D coriolis terms (in Omega.cos Phi) on - off	14
useAbsVorticity	work with f+zeta in Coriolis terms	12
useAIM		28
useAltDeriv		5
useAnisotropicViscAgridMax	Changed to be default behavior. Can	4
useAreaViscLength	Set to true to use old scaling for viscous lengths,	7
useATM2D		4
useBetaPlaneF	Coriolis coeff = f0 + beta.y (replaced by selectCoriMap=1)	4
useBOLUS		6
useBulkForce	use surf. fluxes from bulk-forcing external S/R	19
useCDscheme	use CD-scheme to calculate Coriolis terms.	24
useCentralDiff		8
useCFC	flag to turn on/off CFC pkg	8
useCheapAML		10
useConstantF	Coriolis coeff set to f0 (replaced by selectCoriMap=0)	4
useCoriolis	Flag which turns the coriolis terms on and off.	11
useCoupler	use Coupler for a multi-components set-up.	24
useCubedSphereExchange	use Cubed-Sphere topology domain.	80
useDARWIN	flag to turn on/off darwin pkg	14
useDiagnostics		160
useDIC	flag to turn on/off DIC pkg	10
useDOWN_SLOPE		19
useEBM		10
useECCO		5
useEMBED_FILES		6
useEnergyConservingCoriolis		6
useEXF	use surf. fluxes from exf external S/R	35
useExfCheckRange	check range of input/output field values	6
useExfYearlyFields	when set, automatically add extension	41
useExfZenIncoming	compute incoming solar radiation along with zenith angle	9
useFixedCEast		9
useFixedCWest		9
useFizhi		6
useFLT		12
useFluxFormula_AIM	set to T when using AIM flux formula rather	10
useFreshwaterFlux		4
useFullLeith	Set to true to use full Leith viscosity(may be unstable	8
useGCHEM		19
useGCMwVel		5
useGGL90		20
useGMRedi		45
useGrdchk		9
useGridAlt		5
useHB87stressCoupling	use an intergral over ice and ocean surface	7
useICEFRONT		12
useImportCO2	True => use the Imported atmos. CO2 from coupler	9
useImportFIce	True => use the Imported Sea-Ice fraction (DIC-only)	6
useImportFlxCO2	True => use the Imported air-sea CO2 fluxes from coupler	8
useImportFW	True => use the Imported Fresh Water flux fr cpl	10
useImportHFlx	True => use the Imported HeatFlux from couler	8
useImportMxlD	True => use Imported Mix.Layer Detph from coupler	6
useImportSIce	True => use the Imported Sea-Ice mass as ice-loading	12
useImportSLP	True => use the Imported Sea-level Pressure	13
useImportSSS	True => use the Imported SSS from coupler	6
useImportSST	True => use the Imported SST from coupler	7
useImportTau	True => use the Imported Wind-Stress from couler	7
useImportVsq	True => use the Imported Surf. velocity^2	6
useImportWSpd	True => use the Imported surface Wind speed fr cpl	9
useISOMIPTD		8
useJamartMomAdv	Use wet-point method for V.I. non-linear term	7
useJamartWetPoints	Use wet-point method for Coriolis (Jamart & Ozer 1986)	9
useKPP		50
useLand		15
useLayers		10
useMATRIX		14
useMNC		146
useMY82		19
useMYPACKAGE		16
useNEST_CHILD	use Child Nesting interface (pkg/nest_child)	16
useNEST_PARENT	use Parent Nesting interface (pkg/nest_parent)	11
useNHMTerms	If TRUE use non-hydrostatic metric terms.	12
useOASIS	use OASIS-coupler for a multi-components set-up.	12
useOBCS		59
useObsEmP		5
useObsRunoff		5
useOffLine		18
useOldFreezing	use the old version (before checkpoint52a_pre, 2003-11-12)	5
useOPPS		10
useOrlanskiEast		15
useOrlanskiNorth		15
useOrlanskiSouth		15
useOrlanskiWest		15
usePickupBeforeC35	to restart from old-pickup files (generated with code	4
usePickupBeforeC54	start from old-pickup files, generated with code from	10
usePP81		19
usePTRACERS		59
usePW79thermodynamics	use 0-layer thermodynamics as described in	10
useRBCptracers		4
useRBCptrnum		9
useRBCS		12
useRBCsalt		8
useRBCtemp		8
usercost_datafile		4
usercost_errfile		4
useRealFreshWaterFlux	if True (=Natural BCS), treats P+R-E flux	52
useREGRID		9
useRelativeWind	Subtract U/VVEL or U/VICE from U/VWIND before computing U/VSTRESS	8
useRunClock		9
useSALT_PLUME		21
useSBO		9
useSEAICE		49
useSETRLSTK		6
useSHAP_FILT		11
useShelfIce		21
useSIGREG		9
useSingleCpuIO	When useSingleCpuIO is set, MDS_WRITE_FIELD outputs from	31
useSphereF	Coriolis = 2.omega.sin(phi) (replaced by selectCoriMap=2)	4
useSRCGSolver	Set to true to use conjugate gradient	7
useStabilityFct_overIce	over sea-ice, compute turbulent transfert	6
useStevensAdvection		5
useStevensEast		10
useStevensNorth		10
useStevensPhaseVel		5
useStevensSouth		10
useStevensWest		10
useStrainTensionVisc	Set to true to use Strain-Tension viscous terms	6
useThSIce		35
useZONAL_FILT		14
using_ers		5
using_gfo		5
using_topex		6
usingCartesianGrid	If TRUE grid generation will be in a cartesian	26
usingCurvilinearGrid	If TRUE, use a curvilinear grid (to be provided)	35
usingCylindricalGrid	If TRUE grid generation will be Cylindrical	20
usingMPI		35
usingSphericalPolarGrid	If TRUE grid generation will be in a	40
ustress_exfremo_intercept		6
ustress_exfremo_slope		6
ustressconst		5
ustressfile		16
ustressperiod		11
ustressstartdate1		5
ustressstartdate2		5
UvelFile		4
uVelInitFile		15
uwind_errfile		10
uwind_exfremo_intercept		6
uwind_exfremo_slope		6
uwindconst		5
UWindFile		15
uwindfile		13
uwindperiod		11
uwindstartdate1		5
uwindstartdate2		5
V A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Symbol	Description	Uses
val_regMask	corresponding mask value of region n in the region-mask	5
vbarfile		25
vdrifterrfile		5
vdriftfile		5
vectorInvariantMomentum	use Vector-Invariant form (mom_vecinv package)	18
vel0errfile		4
velerrfile		4
VERTICAL_VELOCITY		7
VGUST	wind speed for sub-grid-scale gusts	12
viscA4	Biharmonic viscosity coeff. for mixing of	20
viscA4D	Biharmonic viscosity coeff. for mixing of momentum laterally	15
viscA4Dfile	File containing 3D specification of horizontal viscosity	8
viscA4Grid	non-dimensional grid-size dependent bi-harmonic viscosity	12
viscA4GridMax	maximum and minimum biharmonic viscosity coefficients ...	9
viscA4GridMin	in terms of non-dimensional grid-size dependent viscosity	8
viscA4Max	Maximum biharmonic viscosity coeff. for mixing of	9
viscA4ReMax	Maximum Gridscale Reynolds number for	6
viscA4W	Biharmonic viscosity coeff. for mixing of vertical	8
viscA4Z	Biharmonic viscosity coeff. for mixing of momentum laterally	15
viscA4Zfile	File containing 3D specification of horizontal viscosity	8
viscAh	Eddy viscosity coeff. for mixing of	14
viscAhD	Eddy viscosity coeff. for mixing of momentum laterally	14
viscAhDfile	File containing 3D specification of horizontal viscosity	8
viscAhGrid	non-dimensional grid-size dependent viscosity	11
viscAhGridMax	maximum and minimum harmonic viscosity coefficients ...	6
viscAhGridMin	in terms of non-dimensional grid-size dependent visc.	6
viscAhMax	Maximum eddy viscosity coeff. for mixing of	9
viscAhReMax	Maximum gridscale Reynolds number for eddy viscosity	6
viscAhW	Eddy viscosity coeff. for mixing of vertical	7
viscAhZ	Eddy viscosity coeff. for mixing of momentum laterally	14
viscAhZfile	File containing 3D specification of horizontal viscosity	8
viscAp	Eddy viscosity coeff. for mixing of momentum vertically ( Pa^2/s )	5
viscAr		12
viscArNr	vertical profile of Eddy viscosity coeff.	29
viscAstrain	replaced by standard viscosity coeff & useStrainTensionVisc	4
viscAtension	replaced by standard viscosity coeff & useStrainTensionVisc	4
viscAz	Eddy viscosity coeff. for mixing of momentum vertically ( m^2/s )	5
viscC2leith	Leith non-dimensional viscosity factor (grad(vort))	10
viscC2leithD	Modified Leith non-dimensional visc. factor (grad(div))	11
viscC2smag	Smagorinsky non-dimensional viscosity factor (harmonic)	9
viscC4leith	Leith non-dimensional viscosity factor (grad(vort))	11
viscC4leithD	Modified Leith non-dimensional viscosity factor (grad(div))	12
viscC4smag	Smagorinsky non-dimensional viscosity factor (biharmonic)	9
vMxL_default	default value for ocean current velocity in MxL [m/s]	7
vonk		15
Vrelaxobcsbound		12
Vrelaxobcsinner	relaxation time scale (in seconds) for U/V-points	12
vstress_exfremo_intercept		6
vstress_exfremo_slope		6
vstressconst		5
vstressfile		14
vstressperiod		11
vstressstartdate1		5
vstressstartdate2		5
VvelFile		4
vVelInitFile		15
vwind_errfile		10
vwind_exfremo_intercept		6
vwind_exfremo_slope		6
vwindconst		5
VWindFile		15
vwindfile		13
vwindperiod		11
vwindstartdate1		5
vwindstartdate2		5
W A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Symbol	Description	Uses
W2_EXCH2_PARM01		2
W2_mapIO	select option for global-IO mapping: old format, put facets 1 after the other in the X dir.; this is not necessary compact . compact format, 1 facet after the other (mostly in Y dir.) but needs to fold some facet (domain) if too large compact format (= 1 long line), one facet after the other.	16
W2_printMsg	select option for information messages printing open and print to w2_tile_topology log file print the minimum, to StdOut no duplicated print from different processes (only Master) all processes do print (used to check).	17
W2_useE2ioLayOut	=T: use Exch2 global-IO Layout; =F: use model default	12
wapressure0		5
waqh0		11
watemp0		11
wbarfile		10
wbottomdrag0		5
wdiffkr0		7
wedtau0		10
wevap0		5
whflux0		15
windFile		7
windstressmax		12
wkapgm0		7
wkapredi0		7
wlwdown0		5
wlwflux0		5
wmean_apressure		5
wmean_aqh		5
wmean_atemp		5
wmean_evap		5
wmean_hflux		7
wmean_lwdown		5
wmean_lwflux		5
wmean_precip		5
wmean_sflux		7
wmean_smrarea		4
wmean_snowprecip		5
wmean_swdown		5
wmean_swflux		5
wmean_tau		6
wmean_wind		6
wprecip0		5
writeBinaryPrec	Precision used for writing binary files	92
writegrid_mnc	use mnc to write model-grid arrays to file	6
writePickupAtEnd	write pickup at the last timestep	7
writeStatePrec	Precision used for writing model state.	12
wsflux0		15
wsmrarea0		5
wsnowprecip0		5
wspeed_exfremo_intercept		5
wspeed_exfremo_slope		5
wspeedconst		5
WSpeedFile		6
wspeedfile		11
wspeedperiod		7
wspeedstartdate1		5
wspeedstartdate2		5
wswdown0		5
wswflux0		5
wtau0		35
WvelFile		4
wwind0		14
X A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Symbol	Description	Uses
xbtfile		7
xgOrigin	Origin of the X-axis (Cartesian Grid) / Longitude of Western most cell face (Lat-Lon grid) (Note: this is an inert parameter but it makes geographical references simple.)	34
xkar	von Karman constant [-]	20
xphaseinit		5
xx_apressure_file		20
xx_apressure_remo_intercept		7
xx_apressure_remo_slope		7
xx_apressureperiod		11
xx_apressurestartdate1		6
xx_apressurestartdate2		6
xx_aqh_file		22
xx_aqh_remo_intercept		7
xx_aqh_remo_slope		7
xx_aqhperiod		11
xx_aqhstartdate1		6
xx_aqhstartdate2		6
xx_atemp_file		22
xx_atemp_remo_intercept		7
xx_atemp_remo_slope		7
xx_atempperiod		11
xx_atempstartdate1		6
xx_atempstartdate2		6
xx_bottomdrag_file		16
xx_depth_file		21
xx_diffkr_file		24
xx_edtaux_file		16
xx_edtauy_file		16
xx_efluxp_file		21
xx_efluxy_file		21
xx_etan_file		24
xx_evap_file		20
xx_evap_remo_intercept		7
xx_evap_remo_slope		7
xx_evapperiod		11
xx_evapstartdate1		6
xx_evapstartdate2		6
xx_gen2d_file		15
xx_gen3d_file		13
xx_hflux_file		27
xx_hflux_remo_intercept		7
xx_hflux_remo_slope		7
xx_hfluxm_file		19
xx_hfluxperiod		12
xx_hfluxstartdate1		6
xx_hfluxstartdate2		6
xx_kapgm_file		24
xx_kapredi_file		21
xx_lwdown_file		20
xx_lwdown_remo_intercept		7
xx_lwdown_remo_slope		7
xx_lwdownperiod		11
xx_lwdownstartdate1		6
xx_lwdownstartdate2		6
xx_lwflux_file		20
xx_lwflux_remo_intercept		7
xx_lwflux_remo_slope		7
xx_lwfluxperiod		11
xx_lwfluxstartdate1		6
xx_lwfluxstartdate2		6
xx_obcse_file		27
xx_obcseperiod		9
xx_obcsestartdate1		6
xx_obcsestartdate2		6
xx_obcsn_file		27
xx_obcsnperiod		9
xx_obcsnstartdate1		6
xx_obcsnstartdate2		6
xx_obcss_file		27
xx_obcssperiod		9
xx_obcssstartdate1		6
xx_obcssstartdate2		6
xx_obcsw_file		27
xx_obcswperiod		9
xx_obcswstartdate1		6
xx_obcswstartdate2		6
xx_precip_file		22
xx_precip_remo_intercept		7
xx_precip_remo_slope		7
xx_precipperiod		11
xx_precipstartdate1		6
xx_precipstartdate2		6
xx_runoff_file		18
xx_runoff_remo_intercept		6
xx_runoff_remo_slope		6
xx_runoffperiod		7
xx_runoffstartdate1		5
xx_runoffstartdate2		5
xx_salt_file		26
xx_sflux_file		27
xx_sflux_remo_intercept		7
xx_sflux_remo_slope		7
xx_sfluxperiod		12
xx_sfluxstartdate1		6
xx_sfluxstartdate2		6
xx_siarea_file		18
xx_siheff_file		18
xx_sihsnow_file		18
xx_snowprecip_file		20
xx_snowprecip_remo_intercept		7
xx_snowprecip_remo_slope		7
xx_snowprecipperiod		11
xx_snowprecipstartdate1		6
xx_snowprecipstartdate2		6
xx_sss_file		24
xx_sssperiod		9
xx_sssstartdate1		6
xx_sssstartdate2		6
xx_sst_file		25
xx_sstperiod		10
xx_sststartdate1		6
xx_sststartdate2		6
xx_swdown_file		22
xx_swdown_remo_intercept		7
xx_swdown_remo_slope		7
xx_swdownperiod		11
xx_swdownstartdate1		6
xx_swdownstartdate2		6
xx_swflux_file		22
xx_swflux_remo_intercept		7
xx_swflux_remo_slope		7
xx_swfluxperiod		11
xx_swfluxstartdate1		6
xx_swfluxstartdate2		6
xx_tauu_file		32
xx_tauu_remo_intercept		8
xx_tauu_remo_slope		8
xx_tauuperiod		13
xx_tauustartdate1		6
xx_tauustartdate2		6
xx_tauv_file		32
xx_tauv_remo_intercept		8
xx_tauv_remo_slope		8
xx_tauvperiod		13
xx_tauvstartdate1		6
xx_tauvstartdate2		6
xx_theta_file		26
xx_tr1_file		21
xx_uvel_file		16
xx_uwind_file		23
xx_uwind_remo_intercept		8
xx_uwind_remo_slope		8
xx_uwindperiod		12
xx_uwindstartdate1		6
xx_uwindstartdate2		6
xx_vvel_file		16
xx_vwind_file		23
xx_vwind_remo_intercept		8
xx_vwind_remo_slope		8
xx_vwindperiod		12
xx_vwindstartdate1		6
xx_vwindstartdate2		6
Y A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Symbol	Description	Uses
yadmark		124
yctrlid		26
yctrlpospack		11
yctrlposunpack		9
ygOrigin	Origin of the Y-axis (Cartesian Grid) / Latitude of Southern most face (Lat-Lon grid).	39
Z A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Symbol	Description	Uses
zca	scale depth for CaCO3 remineralization (m)	7
zcrit	Minimum Depth (m) over which biological activity	6
zetam		5
zetas		5
zmax		6
zmin		7
zolmin	minimum stability parameter	7
zonal_filt_cospow	Latitude dependance of the damping function	5
zonal_filt_lat	Moved to package zonal_filt	11
zonal_filt_mode2dx	to specify how to treat the 2.dx mode :	6
zonal_filt_sinpow	zonal mode dependance of the damping function	5
zonal_filt_TrStagg	if using a Stager time-step, filter T,S before	4
zonal_filt_uvStar	filter applied to u*,v* (before SOLVE_FOR_P)	8
zonalWindFile	File containing zonal wind data	15
ZONFILT_PARM01		2
zref	reference height [m] for transfer coefficient	27
zth	height [m] of near-surface air-temp. & air-humid. input	14
zwd	height [m] of near-surface wind-speed input data	7