Symbol	Description	Uses
data_errfile		13
dB_dz		7
debugLevel	controls printing of algorithm intermediate results	156
debugMode	controls printing of debug msg (sequence of S/R calls).	279
deepAtmosphere	deep model (drop the shallow-atmosphere approximation)	10
delP	Vertical grid spacing ( Pa ).	5
delR	Vertical grid spacing ( units of r ).	88
delRc	Vertical grid spacing between cell centers (r unit).	13
delRcFile	File containing vertical grid spacing delRc (1.D array)	9
delRFile	File containing vertical grid spacing delR (1.D array)	9
deltaT	Default timestep ( s )	79
deltaTClock	Timestep used as model clock . This determines the	146
deltaTfreesurf	Timestep for free-surface equation ( s )	44
deltaTmom		67
deltaToffline		5
deltaTrbcs	time step used to compute iteration numbers for singleTimeFiles	5
deltaTtracer	Timestep for tracer equations ( s )	13
delX	Separation between cell faces (m) or (deg), depending	78
delXFile	File containing X-spacing grid definition (1.D array)	9
delY		101
delYFile	File containing Y-spacing grid definition (1.D array)	9
delZ	Vertical grid spacing ( m ).	14
delZexp		9
dhSnowLin	half slope of linear distribution of snow thickness within	8
diag_mnc		14
diag_pickup_read		9
diag_pickup_read_mnc		8
diag_pickup_write		8
diag_pickup_write_mnc		8
DIAG_STATIS_PARMS		2
diagFreq	Frequency with which model writes diagnostic output	19
DIAGNOSTICS_LIST		1
diagSt_mnc		10
diagSt_regMaskFile		11
DIC_atmospFile	file name of atmospheric pressure	9
DIC_FORCING		2
DIC_forcingCycle	periodic forcing parameter specific for dic (seconds)	8
DIC_forcingPeriod	periodic forcing parameter specific for dic (seconds)	7
DIC_iceFile	file name of seaice fraction	9
dic_int1		13
dic_int2		6
dic_int3		7
dic_int4		7
DIC_ironFile	file name of aeolian iron flux	9
dic_pCO2	Atmospheric pCO2 to be rad in data.dic	10
DIC_silicaFile	file name of surface silica	13
DIC_windFile	file name of wind speeds	9
DIFF1		10
diffK4S	Biharmonic diffusion coeff. for mixing of	8
diffK4T	Biharmonic diffusion coeff. for mixing of	7
diffKhS	Laplacian diffusion coeff. for mixing of	8
diffKhT	Laplacian diffusion coeff. for mixing of	7
diffKpS	Laplacian diffusion coeff. for mixing of salt vertically ( Pa^2/s )	5
diffKpT	Laplacian diffusion coeff. for mixing of heat vertically ( Pa^2/s )	5
diffkr_errfile		6
diffKrBL79deep	T/S deep diffusivity (m^2/s) Bryan and Lewis, 1979	9
diffKrBL79Ho	depth offset for arctan fn (m) Bryan and Lewis, 1979	9
diffKrBL79scl	depth scale for arctan fn (m) Bryan and Lewis, 1979	9
diffKrBL79surf	T/S surface diffusivity (m^2/s) Bryan and Lewis, 1979	12
diffKrBLEQdeep	same as diffKrBL79deep but at Equator	9
diffKrBLEQHo	same as diffKrBL79Ho but at Equator	9
diffKrBLEQscl	same as diffKrBL79scl but at Equator	9
diffKrBLEQsurf	same as diffKrBL79surf but at Equator	12
diffKrFile	File containing 3D specification of vertical diffusivity	7
diffKrNrS	vertical profile of Laplacian diffusion coeff.	12
diffKrNrT	vertical profile of Laplacian diffusion coeff.	21
diffKrS		12
diffKrT		12
diffKsnow	thermal conductivity of snow (W/m/K)	6
diffKzS	Laplacian diffusion coeff. for mixing of salt vertically ( m^2/s )	5
diffKzT	Laplacian diffusion coeff. for mixing of heat vertically ( m^2/s )	5
difm0		5
difmcon		5
difs0		5
difscon		5
dift0		5
diftcon		5
dimensions		3
dimsFacets	facet pair of dimensions (n1x,n1y,n2x,n2y ...)	6
doAB_onGtGs	if the Adams-Bashforth time stepping is used, always	6
doAdmtlmBypassAD		6
doInitXX		9
doMainPack		10
doMainUnpack		13
doPackDiag		38
DOPfraction	fraction of new production going to DOP	13
doSinglePrecTapelev		6
doZscalePack		8
doZscaleUnpack		6
dQdTFile		2
DRHLSC		6
dRhoSmall	parameter for mixed-layer diagnostic	7
dsfmax		5
dsolmn		5
dsolms		5
dtatm		14
dtcouple		18
DTHETA	Potential temp. gradient for stability correction	31
dtocn		12
dTstab	potential temp. increment for stability function derivative	26
dTtracerLev	Timestep for tracer equations ( s ), function of level k	83
dumpAtLast	always write time-ave (freq>0) diagnostics at the end of the run	8
dumpFreq	Frequency with which model state is written to	31
dumpInitAndLast	dumps model state to files at Initial (nIter0)	14
DWNSLP_drFlow		6
DWNSLP_PARM01		2
DWNSLP_rec_mu	reciprol friction parameter (unit = time scale [s])	6
DWNSLP_slope	fixed slope (=0 => use the local slope)	8
dxSpacing	Default spacing in X and Y. Units are that of coordinate system i.e. cartesian => metres s. polar => degrees	6
dySpacing	Default spacing in X and Y. Units are that of coordinate system i.e. cartesian => metres s. polar => degrees	6