Symbol Description Uses
S_winton Winton salinity of ice [g/kg] 6
SadournyCoriolis for backward compatibility 4
salt0errfile 10
salt_addMass salinity of addMass array 11
salt_EvPrRn salinity of Rain & Evap. 18
SALT_PLUME_PARM01 2
salt_useDWNSLP true if Down-Sloping flow applies to salinity 6
saltAdvection Flag which turns advection of salinity on and off. 14
saltAdvScheme Salt. Horiz.advection scheme selector 27
saltClimFile File containing surface salt climataology used 16
saltDiffusion diffusion of salinity on/off (flag not used) 4
salterrfile 10
SaltFile 3
saltFluxFile File containing surface salt flux 12
saltForcing Flag which turns external forcing of salinity on 9
saltIce salinity of ice [g/kg] 10
saltImplVertAdv Turns on implicit vertical advection for Salinity 14
SaltPlumeCriterion 11
SaltPlumeSouthernOcean 5
saltQsFac reduction of sat. vapor pressure over salty water 6
saltRelaxFile 9
saltsat reduction of saturation vapor pressure over salt water 6
saltStepping Turns salinity equation time-stepping off 25
saltVertAdvScheme Salt. Vert. Advection scheme selector 14
sbarfile 38
sBeta Linear EOS haline contraction coefficient. 13
SBO_PARM01 2
sbo_taveFreq SBO time-averaging frequency (s) 7
scale_runoff 5
scalname 6
scatperiod 4
scatstartdate1 8
scatstartdate2 8
scatx_errfile 7
scatxdatfile 9
scaty_errfile 7
scatydatfile 9
SDALB 8
sdatfile 7
SEAICE_airTurnAngle 12
SEAICE_availHeatFrac 13
SEAICE_availHeatFracFrz 12
SEAICE_clamp_salt 5
SEAICE_clamp_theta 5
SEAICE_clipVelocities clip velocities to +/- 40cm/s 10
SEAICE_cpAir 12
SEAICE_dalton 15
SEAICE_deltaTdyn 25
SEAICE_deltaTevp 24
SEAICE_deltaTtherm 75
SEAICE_drag 13
SEAICE_drag_south 14
SEAICE_dryIceAlb 10
SEAICE_dryIceAlb_south 11
SEAICE_drySnowAlb 10
SEAICE_drySnowAlb_south 11
SEAICE_dump_mnc write snap-shot output using MNC 10
SEAICE_dumpFreq 10
SEAICE_eccen 11
SEAICE_elasticParm 9
SEAICE_emissivity 11
SEAICE_EPS 21
SEAICE_EPS_SQ 18
SEAICE_evpDampC 10
SEAICE_evpTauRelax 12
SEAICE_freeze 11
SEAICE_gamma_t 12
SEAICE_gamma_t_frz 10
SEAICE_iceConduct 8
SEAICE_initialHEFF 8
SEAICE_latentIce 4
SEAICE_latentWater 4
SEAICE_lhEvap 10
SEAICE_lhFusion 10
SEAICE_lhSublim 10
SEAICE_maskRHS mask the RHS of the solver where there is no ice 8
SEAICE_mon_mnc write monitor to netcdf file 11
SEAICE_monFreq 9
SEAICE_no_slip apply no slip boundary conditions to seaice velocity 9
SEAICE_PARM01 2
SEAICE_PARM02 2
SEAICE_rhoAir 21
SEAICE_rhoIce 22
SEAICE_rhoSnow 16
SEAICE_salinity 9
SEAICE_sensHeat 4
SEAICE_shortwave 9
SEAICE_snowConduct 9
SEAICE_snowThick 9
SEAICE_strength 11
SEAICE_tave_mnc write TimeAverage output using MNC 10
SEAICE_taveFreq 12
SEAICE_waterAlbedo 9
SEAICE_waterDrag 18
SEAICE_waterDrag_south 19
SEAICE_waterTurnAngle 16
SEAICE_wetIceAlb 10
SEAICE_wetIceAlb_south 11
SEAICE_wetSnowAlb 10
SEAICE_wetSnowAlb_south 11
SEAICE_zetaMaxFac 10
SEAICE_zetaMin 12
SEAICEadvAge turn on advection of ice age (does not work with 13
SEAICEadvArea turn on advection of fraction area 18
SEAICEadvHeff turn on advection of effective thickness 17
SEAICEadvSalt turn on advection of salt (does not work with 15
SEAICEadvSchAge 19
SEAICEadvSchArea 23
SEAICEadvScheme 16
SEAICEadvSchHeff 23
SEAICEadvSchSalt 20
SEAICEadvSchSnow 20
SEAICEadvSnow turn on advection of snow (does not work with 14
SEAICErestoreUnderIce restore surface T/S also underneath ice 9
SEAICEstressFactor 12
SEAICEuseDYNAMICS 14
SEAICEuseEVPpickup 7
SEAICEuseFlooding turn on scheme to convert submerged snow into ice 12
SEAICEuseFluxForm use flux form for advection and diffusion 9
SEAICEuseFREEDRIFT 12
SEAICEuseMetricTerms use metric terms for dynamics solver 9
SEAICEuseTEM 10
SEAICEwriteState 8
SEGRAD 6
select_rStar option related to r* vertical coordinate 56
select_ZenAlbedo switch to different methods to compute albedo (direct part) 0 just use exf_albedo 1 use daily mean albedo from exf_zenithangle_table.F 2 use daily mean albedo computed as in pkg/aim_v23 3 use daily variable albedo 16
selectAddFluid option to add mass source/sink of fluid in the interior 26
selectCoriMap select setting of Coriolis parameter map: 17
selectFindRoSurf select the way surf. ref. pressure (=Ro_surf) is 14
selectKEscheme Kinetic Energy scheme selector (Vector Inv.) 12
selectNHfreeSurf option for Non-Hydrostatic (free-)Surface formulation: 21
selectSigmaCoord option related to sigma vertical coordinate 24
selectVortScheme Scheme selector for Vorticity term (Vector Inv.) 30
set_regMask region-mask set-index that define the region n 5
sflux_errfile 10
sflux_exfremo_intercept 6
sflux_exfremo_slope 6
sfluxconst 5
sfluxfile 10
SfluxFile 2
sfluxmeanbarfile 11
sfluxperiod 8
sfluxstartdate1 5
sfluxstartdate2 5
sgrunoff_exfremo_intercept 5
sgrunoff_exfremo_slope 5
sgrunoffconst 5
sgrunoffperiod 7
sgrunoffstartdate 9
sgrunoffstartdate1 5
sgrunoffstartdate2 5
Shap_alwaysExchTr always call exch(Tracer) nShapTr times 9
Shap_alwaysExchUV always call exch(U,V) nShapUV times 10
Shap_diagFreq Frequency^-1 for diagnostic output (s) 8
shap_filt_TrStagg if using a Stagger time-step, filter T,S before 5
shap_filt_uvStar filter applied to u*,v* (before SOLVE_FOR_P) 9
Shap_funct define which Shapiro Filter function is used 44
Shap_noSlip No-slip parameter (=0 free sleep ; =1 No-slip) 8
SHAP_PARM01 2
Shap_TrLength Length scale for tracer filter 9
Shap_Trtau Time scale for tracer filter 11
Shap_uvLength Length scale for momentum filter 11
Shap_uvtau Time scale for momentum filter 22
SHELFICE_dump_mnc 7
SHELFICE_dumpFreq 5
SHELFICE_PARM01 2
SHELFICE_tave_mnc 7
SHELFICE_taveFreq 7
SHELFICEboundaryLayer 4
SHELFICEconserve 7
SHELFICEDragLinear 5
SHELFICEDragQuadratic 5
shelfIceFile File containing the topography of the shelfice draught 4
SHELFICEHeatCapacity_Cp 4
SHELFICEheatTransCoeff 10
SHELFICEkappa 6
SHELFICElatentHeat 10
SHELFICEloadAnomalyFile 6
SHELFICEsaltTransCoeff 11
SHELFICEthetaSurface 8
SHELFICEtopoFile 6
SHELFICEwriteState 5
sideDragFactor side-drag scaling factor (used only if no_slip_sides) 12
siobEperiod 8
siobEstartdate1 7
siobEstartdate2 7
siobNperiod 8
siobNstartdate1 7
siobNstartdate2 7
siobSperiod 8
siobSstartdate1 7
siobSstartdate2 7
siobWperiod 8
siobWstartdate1 7
siobWstartdate2 7
SIsal0 7
SMF 6
smooth2D_Lx0 6
smooth2D_Ly0 6
smooth2Dfilter 7
smooth2Dnbt 8
smooth2Dsize 5
smooth2Dtype 7
smooth3D_Lx0 6
smooth3D_Ly0 6
smooth3D_Lz0 6
smooth3Dfilter 7
smooth3Dnbt 8
smooth3DsizeH 5
smooth3DsizeZ 6
smooth3DtypeH 6
smooth3DtypeZ 6
smooth_nml 2
smoothAbsFuncRange 1/2 of interval around zero, for which FORTRAN ABS 14
smrarea_errfile 6
smrareabarfile 12
smrareadatfile 9
smrareaperiod 3
smrareastartdate1 5
smrareastartdate2 5
smrsssbarfile 9
smrsstbarfile 9
sMxL_default default value for salinity in MixLayer [psu] 9
snapshot_mnc 25
snow_emissivity 15
snowAgTime snow aging time scale [s] 6
snowprecip_errfile 6
snowprecip_exfremo_intercept 5
snowprecip_exfremo_slope 5
snowprecipconst 5
snowprecipfile 7
snowprecipperiod 7
snowprecipstartdate1 5
snowprecipstartdate2 5
SolarFile 17
SOLC 17
SOLV_MAX_ITERS 11
SOLV_NCHECK 13
spongeThickness number grid points that make up the sponge layer (def=0) 100
SPovershoot 6
sRef reference vertical profile for salinity/specific humidity 47
sRefFile File containing reference salinity/spec.humid. sRef (1.D) 9
SrelaxStevens relaxation time scale (in seconds) for T/S-points use phase velocity contribution for open boundary use advective contribution for open boundary 6
ssh_errfile 8
sshv4cost_errfactor 5
sshv4cost_errfile 6
sshv4cost_scalefile 9
sssdatfile 8
ssserrfile 7
sssstartdate1 6
sssstartdate2 6
sstbarfile 11
sstdatfile 9
ssterrfile 7
sstExtrapol extrapolation coeff from 1rst 2 levels up to surface 9
sststartdate1 6
sststartdate2 6
STABILITY_THRESHOLD 8
staggerTimeStep enable a Stagger time stepping U,V (& W) then T,S 34
startDate 4
startDate_1 7
startDate_2 7
startFromPickupAB2 with AB-3 code, start from an AB-2 pickup 8
startIceModel =1 : start ice model at nIter0 ; =0 : use pickup files -1 : start from a small pickup (without Mix.Layer) 7
startTime Starting time for this integration ( s ). 147
startYear 7
stat_fields List of statistics output Fields 7
stat_fname 9
stat_freq Frequency (in s) of statistics output 7
stat_phase phase (in s) to write statistics output 5
stat_region List of statistics output Regions 4
stefan Stefan-Boltzmann constant [W/m^2/K^4] 27
stepFwd_oceMxL step forward mixed-layer T & S (slab-ocean) 18
stressReduction reduction factor for wind-stress under sea-ice [0-1] 19
surfQfile File containing surface heat flux, excluding SW 4
surfQnetFile File containing surface net heat flux 12
surfQswFile File containing surface shortwave radiation 12
SWCAP 9
swdown_errfile 6
swdown_exfremo_intercept 5
swdown_exfremo_slope 5
swdownconst 5
swdownfile 10
swdownperiod 10
swdownstartdate1 5
swdownstartdate2 5
swflux_errfile 6
swflux_exfremo_intercept 5
swflux_exfremo_slope 5
swfluxconst 5
swfluxfile 10
swfluxperiod 8
swfluxstartdate1 5
swfluxstartdate2 5
SWWIL 9