Symbol Description Uses
ubarfile 27
udrifterrfile 5
udriftfile 5
umax 5
umin minimum wind speed used in bulk-formulae [m/s] 22
uniformLin_PhiSurf Set to true to use a uniform Bo_surf in the 9
upwindShear use 1rst order upwind interp. (V.I., vertical advection) 9
upwindVorticity bias interpolation of vorticity in the Coriolis term 15
Urelaxobcsbound 12
Urelaxobcsinner 12
use3dCoriolis Turns the 3-D coriolis terms (in Omega.cos Phi) on - off 14
useAbsVorticity work with f+zeta in Coriolis terms 12
useAIM 28
useAltDeriv 5
useAnisotropicViscAgridMax Changed to be default behavior. Can 4
useAreaViscLength Set to true to use old scaling for viscous lengths, 7
useATM2D 4
useBetaPlaneF Coriolis coeff = f0 + beta.y (replaced by selectCoriMap=1) 4
useBOLUS 6
useBulkForce use surf. fluxes from bulk-forcing external S/R 19
useCDscheme use CD-scheme to calculate Coriolis terms. 24
useCentralDiff 8
useCFC flag to turn on/off CFC pkg 8
useCheapAML 10
useConstantF Coriolis coeff set to f0 (replaced by selectCoriMap=0) 4
useCoriolis Flag which turns the coriolis terms on and off. 11
useCoupler use Coupler for a multi-components set-up. 24
useCubedSphereExchange use Cubed-Sphere topology domain. 80
useDARWIN flag to turn on/off darwin pkg 14
useDiagnostics 160
useDIC flag to turn on/off DIC pkg 10
useDOWN_SLOPE 19
useEBM 10
useECCO 5
useEMBED_FILES 6
useEnergyConservingCoriolis 6
useEXF use surf. fluxes from exf external S/R 35
useExfCheckRange check range of input/output field values 6
useExfYearlyFields when set, automatically add extension 41
useExfZenIncoming compute incoming solar radiation along with zenith angle 9
useFixedCEast 9
useFixedCWest 9
useFizhi 6
useFLT 12
useFluxFormula_AIM set to T when using AIM flux formula rather 10
useFreshwaterFlux 4
useFullLeith Set to true to use full Leith viscosity(may be unstable 8
useGCHEM 19
useGCMwVel 5
useGGL90 20
useGMRedi 45
useGrdchk 9
useGridAlt 5
useHB87stressCoupling use an intergral over ice and ocean surface 7
useICEFRONT 12
useImportCO2 True => use the Imported atmos. CO2 from coupler 9
useImportFIce True => use the Imported Sea-Ice fraction (DIC-only) 6
useImportFlxCO2 True => use the Imported air-sea CO2 fluxes from coupler 8
useImportFW True => use the Imported Fresh Water flux fr cpl 10
useImportHFlx True => use the Imported HeatFlux from couler 8
useImportMxlD True => use Imported Mix.Layer Detph from coupler 6
useImportSIce True => use the Imported Sea-Ice mass as ice-loading 12
useImportSLP True => use the Imported Sea-level Pressure 13
useImportSSS True => use the Imported SSS from coupler 6
useImportSST True => use the Imported SST from coupler 7
useImportTau True => use the Imported Wind-Stress from couler 7
useImportVsq True => use the Imported Surf. velocity^2 6
useImportWSpd True => use the Imported surface Wind speed fr cpl 9
useISOMIPTD 8
useJamartMomAdv Use wet-point method for V.I. non-linear term 7
useJamartWetPoints Use wet-point method for Coriolis (Jamart & Ozer 1986) 9
useKPP 50
useLand 15
useLayers 10
useMATRIX 14
useMNC 146
useMY82 19
useMYPACKAGE 16
useNEST_CHILD use Child Nesting interface (pkg/nest_child) 16
useNEST_PARENT use Parent Nesting interface (pkg/nest_parent) 11
useNHMTerms If TRUE use non-hydrostatic metric terms. 12
useOASIS use OASIS-coupler for a multi-components set-up. 12
useOBCS 59
useObsEmP 5
useObsRunoff 5
useOffLine 18
useOldFreezing use the old version (before checkpoint52a_pre, 2003-11-12) 5
useOPPS 10
useOrlanskiEast 15
useOrlanskiNorth 15
useOrlanskiSouth 15
useOrlanskiWest 15
usePickupBeforeC35 to restart from old-pickup files (generated with code 4
usePickupBeforeC54 start from old-pickup files, generated with code from 10
usePP81 19
usePTRACERS 59
usePW79thermodynamics use 0-layer thermodynamics as described in 10
useRBCptracers 4
useRBCptrnum 9
useRBCS 12
useRBCsalt 8
useRBCtemp 8
usercost_datafile 4
usercost_errfile 4
useRealFreshWaterFlux if True (=Natural BCS), treats P+R-E flux 52
useREGRID 9
useRelativeWind Subtract U/VVEL or U/VICE from U/VWIND before computing U/VSTRESS 8
useRunClock 9
useSALT_PLUME 21
useSBO 9
useSEAICE 49
useSETRLSTK 6
useSHAP_FILT 11
useShelfIce 21
useSIGREG 9
useSingleCpuIO When useSingleCpuIO is set, MDS_WRITE_FIELD outputs from 31
useSphereF Coriolis = 2.omega.sin(phi) (replaced by selectCoriMap=2) 4
useSRCGSolver Set to true to use conjugate gradient 7
useStabilityFct_overIce over sea-ice, compute turbulent transfert 6
useStevensAdvection 5
useStevensEast 10
useStevensNorth 10
useStevensPhaseVel 5
useStevensSouth 10
useStevensWest 10
useStrainTensionVisc Set to true to use Strain-Tension viscous terms 6
useThSIce 35
useZONAL_FILT 14
using_ers 5
using_gfo 5
using_topex 6
usingCartesianGrid If TRUE grid generation will be in a cartesian 26
usingCurvilinearGrid If TRUE, use a curvilinear grid (to be provided) 35
usingCylindricalGrid If TRUE grid generation will be Cylindrical 20
usingMPI 35
usingSphericalPolarGrid If TRUE grid generation will be in a 40
ustress_exfremo_intercept 6
ustress_exfremo_slope 6
ustressconst 5
ustressfile 16
ustressperiod 11
ustressstartdate1 5
ustressstartdate2 5
UvelFile 4
uVelInitFile 15
uwind_errfile 10
uwind_exfremo_intercept 6
uwind_exfremo_slope 6
uwindconst 5
UWindFile 15
uwindfile 13
uwindperiod 11
uwindstartdate1 5
uwindstartdate2 5