Symbol Description Uses
C cell Center full-column mask (= 2D mask) 105
c level and tile indices used for weighting (mask,area ...) 30
c parser field with characteristics of the diagnostics 0
C used for mapping tiled file to global file 0
c CV (coordinate variable) name 0
c CV start,end indicies ----+ 0
c CV index 0
c0 20
c1 coefficients in quadratic eqn for T1 51
C1 121
c10 coefficients in quadratic eqn for T1 3
c1Frz 3
c1Mlt 3
c1Set1 1rst digit (from left) of 1rst set of labels 7
c1Set2 1rst digit (from left) of 2nd set of labels 4
c1Set3 1rst digit (from left) of 3rd set of labels 4
c2 36
C2 53
c2Frz 4
c2Mlt 4
c2Set1 2nd digit (from left) of 1rst set of labels 4
c2Set2 2nd digit (from left) of 2nd set of labels 6
c2Set3 2nd digit (from left) of 3rd set of labels 4
c3 36
C3 5
c3d matrix upper diagnonal 17
c3d upper diagonal of the tridiagonal matrix 0
c3d upper diagonal of the tridiagonal matrix 0
c3d upper diagonal of the tridiagonal matrix 0
c3d_m1 4
c3d_prime 8
C4 5
C5 5
c5d main diagonal of the pentadiagonal matrix 85
c5d modified to enable to find Xp solution of 0
c5d main diag of pentadiagonal matrix 0
c5d main diagonal of the pentadiagonal matrix 0
c5d main diag of pentadiagonal matrix 0
c5d main diagonal of the pentadiagonal matrix 0
c5d_prime 8
ca 3
cacheLineSize 23
cAdjFreq Frequency of convective adjustment 18
caexport flux of carbonate from base each productive 9
caexport flux of carbonate from base each productive 0
cag 6
cah 13
caib 23
caif 10
CAL_ADDTIME 14
CAL_CHECKDATE 2
cal_CompDates 6
CAL_CONVDATE 18
CAL_COPYDATE 29
CAL_DAYSFORMONTH 1
CAL_DAYSPERMONTH 1
CAL_FULLDATE 87
CAL_GETDATE 26
CAL_GETMONTHSREC 8
cal_i 1
cal_IntDays 11
cal_IntMonths 12
cal_Intmonths 1
cal_IntSteps 2
cal_IntYears 11
cal_IsLeap 35
cal_l 1
CAL_MONTHSFORYEAR 1
CAL_MONTHSPERYEAR 1
CAL_NML 1
cal_nml 1
cal_nStepDay 4
cal_NumInts 6
CAL_PRINTDATE 1
CAL_PRINTERROR 43
CAL_READPARMS 2
cal_rl 1
CAL_SET 2
CAL_STEPSFORDAY 1
CAL_STEPSPERDAY 1
CAL_SUBDATES 3
CAL_SUMMARY 2
CAL_TIME2DUMP 12
CAL_TIMEINTERVAL 18
CAL_TIMEPASSED 116
CAL_TIMESTAMP 3
CAL_TOSECONDS 114
CAL_WEEKDAY 1
CALC_1DTO2D 2
CALC_3D_DIFFUSIVITY 8
CALC_ANGLES 3
CALC_BUOYANCY 1
CALC_COMMON_FACTORS Calculate common data (such as volume flux) 5
CALC_COMMON_FACTORS Calculate common data (such as volume flux) 0
CALC_COMMON_FACTORS Calculate common data (such as volume flux) 0
CALC_COMMON_FACTORS Calculate common data (such as volume flux) 0
CALC_COMMON_FACTORS Calculate common data (such as volume flux) 0
CALC_CS_CORNER_EXTENDED 8
CALC_DIFFUSIVITY Calculate net vertical diffusivity 2
CALC_DIFFUSIVITY Calculate net vertical diffusivity 0
CALC_DIFFUSIVITY Calculate net vertical diffusivity 0
CALC_DIFFUSIVITY Calculate net vertical diffusivity 0
CALC_DIFFUSIVITY Calculate net vertical diffusivity 0
CALC_DIV_GHAT Form the RHS of the surface pressure eqn. 2
CALC_DIV_GHAT Form the RHS of the surface pressure eqn. 0
CALC_DIV_GHAT Form the RHS of the surface pressure eqn. 0
CALC_DIV_GHAT Form the RHS of the surface pressure eqn. 0
CALC_DIV_GHAT Form the RHS of the surface pressure eqn. 0
CALC_EP_FORCING 1
CALC_EXACT_ETA Change SSH to flow divergence. 0
CALC_EXACT_ETA Change SSH to flow divergence. 0
CALC_EXACT_ETA Change SSH to flow divergence. 0
CALC_EXACT_ETA Change SSH to flow divergence. 0
CALC_EXACT_ETA Change SSH to flow divergence. 0
CALC_EXACT_ETA Change SSH to flow divergence. 0
CALC_EXACT_ETA Change SSH to flow divergence. 0
CALC_EXACT_ETA Change SSH to flow divergence. 0
CALC_EXACT_ETA Change SSH to flow divergence. 0
CALC_EXACT_ETA Change SSH to flow divergence. 0
CALC_EXACT_ETA Change SSH to flow divergence. 0
CALC_EXACT_ETA Change SSH to flow divergence. 0
CALC_EXACT_ETA Change SSH to flow divergence. 0
CALC_EXACT_ETA Change SSH to flow divergence. 0
CALC_EXACT_ETA Change SSH to flow divergence. 0
CALC_FILELOAD 2
calc_fluxes_X logical to indicate to calculate fluxes in X dir 30
calc_fluxes_X logical to indicate to calculate fluxes in X dir 0
calc_fluxes_X logical to indicate to calculate fluxes in X dir 0
calc_fluxes_X logical to indicate to calculate fluxes in X dir 0
calc_fluxes_Y logical to indicate to calculate fluxes in Y dir 26
calc_fluxes_Y logical to indicate to calculate fluxes in Y dir 0
calc_fluxes_Y logical to indicate to calculate fluxes in Y dir 0
calc_fluxes_Y logical to indicate to calculate fluxes in Y dir 0
CALC_GRAD_PHI_HYD 2
CALC_GRAD_PHI_SURF Return DDx and DDy of surface pressure 3
CALC_GRAD_PHI_SURF Calculate the gradient of the surface 0
CALC_GRAD_PHI_SURF Return DDx and DDy of surface pressure 0
CALC_GRAD_PHI_SURF Return DDx and DDy of surface pressure 0
CALC_GRAD_PHI_SURF Calculate the gradient of the surface 0
CALC_GRAD_PHI_SURF Return DDx and DDy of surface pressure 0
CALC_GRAD_PHI_SURF Return DDx and DDy of surface pressure 0
CALC_GRAD_PHI_SURF Calculate the gradient of the surface 0
CALC_GRAD_PHI_SURF Return DDx and DDy of surface pressure 0
CALC_GRAD_PHI_SURF Return DDx and DDy of surface pressure 0
CALC_GRAD_PHI_SURF Calculate the gradient of the surface 0
CALC_GRAD_PHI_SURF Return DDx and DDy of surface pressure 0
CALC_GRAD_PHI_SURF Return DDx and DDy of surface pressure 0
CALC_GRAD_PHI_SURF Calculate the gradient of the surface 0
CALC_GRAD_PHI_SURF Return DDx and DDy of surface pressure 0
CALC_GS Calculate the salinity tendency terms 2
CALC_GS Calculate the salinity tendency terms 0
CALC_GS Calculate the salinity tendency terms 0
CALC_GS Calculate the salinity tendency terms 0
CALC_GS Calculate the salinity tendency terms 0
CALC_GT Calculate the temperature tendency terms 2
CALC_GT Calculate the temperature tendency terms 0
CALC_GT Calculate the temperature tendency terms 0
CALC_GT Calculate the temperature tendency terms 0
CALC_GT Calculate the temperature tendency terms 0
CALC_GTR1 Calculate other tracer(s) tendency terms 0
CALC_GW vert. momentum tendency terms ( NH, QH only ). 2
CALC_GW vert. momentum tendency terms ( NH, QH only ). 0
CALC_GW vert. momentum tendency terms ( NH, QH only ). 0
CALC_GW vert. momentum tendency terms ( NH, QH only ). 0
CALC_GW vert. momentum tendency terms ( NH, QH only ). 0
CALC_GW_NEW_THICK 1
CALC_IVDC Set Implicit Vertical Diffusivity for Convection 2
CALC_IVDC Set Implicit Vertical Diffusivity for Convection 0
CALC_IVDC Set Implicit Vertical Diffusivity for Convection 0
CALC_IVDC Set Implicit Vertical Diffusivity for Convection 0
CALC_IVDC Set Implicit Vertical Diffusivity for Convection 0
CALC_OCE_MXLAYER 2
CALC_PCO2 1
CALC_PCO2_APPROX 3
CALC_PCO2_APPROX_CO3 2
CALC_PHI_HYD Integrate the hydrostatic relation. 4
CALC_PHI_HYD Integrate the hydrostatic relation. 0
CALC_PHI_HYD Integrate the hydrostatic relation. 0
CALC_PHI_HYD Integrate the hydrostatic relation. 0
CALC_PHI_HYD Integrate the hydrostatic relation. 0
CALC_R_STAR 5
CALC_SURF_DR Calculate the new surface level thickness. 5
CALC_SURF_DR Calculate the new surface level thickness. 0
CALC_SURF_DR Calculate the new surface level thickness. 0
CALC_SURF_DR Calculate the new surface level thickness. 0
CALC_SURF_DR Calculate the new surface level thickness. 0
CALC_SURF_DR Calculate the new surface level thickness. 0
CALC_SURF_DR Calculate the new surface level thickness. 0
CALC_SURF_DR Calculate the new surface level thickness. 0
CALC_SURF_DR Calculate the new surface level thickness. 0
CALC_SURF_DR Calculate the new surface level thickness. 0
CALC_VISCOSITY Calculate net vertical viscosity 2
CALC_VISCOSITY Calculate net vertical viscosity 0
CALC_VISCOSITY Calculate net vertical viscosity 0
CALC_VISCOSITY Calculate net vertical viscosity 0
CALC_VISCOSITY Calculate net vertical viscosity 0
CALC_WGHT2D 3
CALC_WSURF_TR 2
CALC_ZONAL_MEANS 3
calcAdvection =False if Advec computed with multiDim scheme 18
calcCFL =T: calculate CFL number ; =F: take uFld as CFL 30
calcCFL =T: calculate CFL number ; =F: take vFld as CFL 0
calcCFL =T: calculate CFL number ; =F: take uFld as CFL. 0
calcCFL =T: calculate CFL number ; =F: take vFld as CFL 0
calcCFL =T: calculate CFL number ; =F: take uFld as CFL 0
calcCFL =T: calculate CFL number ; =F: take vFld as CFL 0
CALCITE_SATURATION 2
calcium 3
calcLeith 8
calcMixLayerDepth 6
calcSmag 5
calcWindStress True to calculate Wind-Stress from surface wind 6
caldate 6
caldates 3
calendar_ch 1
calendarDumps moved to package cal (calendar) 9
calendarDumps When set, approximate months (30-31 days) and years (360-372 days) 0
calendarversion 3
calerr 22
caller_sub name of subroutine which is calling this S/R 4
callProc procedure calling this routine 7
calpfe 2
calpha 2
caltoj 3
CALTOJ 4
CAN_PREVENT_X_PERIODICITY 1
CAN_PREVENT_Y_PERIODICITY 1
capac 22
CAPAC 40
capacity 6
CAR carbonate changes due to biological 4
car 3
CAR_DISS 2
CAR_FLUX 2
CAR_FLUX_OMEGA_TOP 2
CAR_S carbonate source 10
CAR_S carbonate sink 0
CARave 9
CARBON_CHEM 1
CARBON_COEFFS 3
CARBON_COEFFS_PRESSURE_DEP 2
carbon_diff 6
CARBON_NEEDS 1
carbonate 3
carg 31
caruptfile 3
CASE 1
casea 16
caseA 2
cAtmp 3
cause 4
CAVAIL 15
CB 5
cb 19
CBMF 13
CBMFtave cloud-base mass flux 9
cBtmp 3
cbuf 9
cbuff 92
cbuffGlobal 2
cbuffindex 229
cbuftmp 9
cc 63
CC 512
cc0 8
cc1 6
cc2 6
cc3t 8
CCC 6
ccFlds 5
ccHead 5
ccLine 17
ccList 5
cco2flux 8
CD 3
cd 4
CD_CODE_INI_VARS 2
CD_CODE_INIT_FIXED 2
CD_CODE_NO_AB_CORIOLIS 3
CD_CODE_NO_AB_MOMENTUM 5
CD_CODE_READ_PICKUP 2
CD_CODE_SCHEME 2
CD_CODE_WRITE_PICKUP 2
CDAIR local wind stress coefficient (used twice) 20
cDalton coefficient used to evaluate Dalton number (for Evap) 10
cdalton coefficient used to evaluate the Dalton number 7
CDEEPS 6
CDENVV surf. heat flux (sens.,lat.) coeff including stability effect 45
CDENVV surf. heat flux (sens.,lat.) coeff including stability effect 0
CDENVV surf. heat flux (sens.,lat.) coeff including stability effect 0
CDENVV surf. heat flux (sens.,lat.) coeff including stability effect 0
cdepth 4
cdf 6
cdi 6
cdiag list of available diagnostic names 94
cdiag list of available diagnostic names 0
CDL 6
cDrag_ n = 1,2,3 coefficients used to evaluate drag coefficient 0
cdrag_ n = 1,2,3 coefficients used to evaluate 0
cDrag_1 5
cdrag_1 20
cDrag_2 5
cdrag_2 20
cDrag_3 5
cdrag_3 20
cdrc 9
CDS 7
cdsc 10
cdscrip 9
cdt CV data pool <-------+ 0
CE 4
cekman 5
CellIndex 6
celsius2K convert centigrade (Celsius) degree to Kelvin 25
cen2kel conversion of deg. Centigrade to Kelvin 10
cenc 6
cF Coriolis acceleration 2
Cf 4
cf 15
cFac 1 for conservative form, 0, otherwise 10
cfac 1
CFAC 2
cfc11 23
CFC11 3
CFC11_CHEM 1
CFC11_FORCING 2
CFC11_SURFFORCING 2
cfc12 23
CFC12 3
CFC12_FORCING 2
CFC12_SURFFORCING 2
cfc22 23
CFC22 3
CFC_ATMOS 3
CFC_ATMOSDATA 1
CFC_atmospFile file name of atmospheric pressure 8
CFC_FIELDS_LOAD 2
CFC_FILENAMES 1
CFC_FORCING 2
CFC_forcingCycle periodic forcing parameter specific for cfc (seconds) 7
CFC_forcingPeriod periodic forcing parameter specific for cfc (seconds) 6
CFC_iceFile file name of seaice fraction 8
CFC_LOAD 1
CFC_NEEDS 1
CFC_PARAM 2
CFC_READPARMS 2
CFC_SCHMIDT_NO 1
CFC_windFile file name of wind speeds 8
cfc_yearbeg 8
cfc_yearend 8
cfcexp 7
CFCEXPS 4
CFCKDIS 4
cfeload 2
cfFacMom Coriolis term tracer parameter 8
cfice 18
cfile 36
cfile2 60
cfile3 60
CFix 2
CFIX 12
cfl 58
cflan 19
cflux carbonate flux 27
cflux carbonate flux 0
cflux carbonate changes due to flux and remineralization 0
cfluxave 9
cfm 3
cfname 6
cg ground heat capacity [J/m2/K](2 levels) 30
CG2D Two-dim pre-con. conjugate-gradient. 3
CG2D Two-dim pre-con. conjugate-gradient. 0
CG2D Two-dim pre-con. conjugate-gradient. 0
CG2D Two-dim pre-con. conjugate-gradient. 0
CG2D Two-dim pre-con. conjugate-gradient. 0
cg2d_b Conjugate Gradient 2-D solver : Right-hand side vector 59
cg2d_b The source term or right hand side 0
cg2d_b The source term or right hand side 0
cg2d_b The source term or right hand side 0
CG2D_I_L 1
CG2D_I_R 1
CG2D_I_WK_R 1
CG2D_I_WK_R2 1
CG2D_I_WK_R3 1
CG2D_NSA 2
CG2D_OUTERLOOPITERS 2
cg2d_q Intermediate matrix-vector product term 20
cg2d_q Intermediate matrix-vector product term 0
cg2d_r *same* 63
cg2d_r *same* 0
cg2d_s *same* 40
cg2d_s *same* 0
CG2D_SINGLECPU_SUM 10
CG2D_SR 2
cg2d_v z times the operator 6
cg2d_x The solution 70
cg2d_x The solution 0
cg2d_x The solution 0
cg2d_x Solution vector of the 2-D solver equation a.x=b 0
cg2d_y residual scaled by preconditioner 16
cg2d_z Intermediate matrix-vector product term reduces the number of recomputation in adjoint mode this field is superfluous if your cg2d is self-adjoint. 6
cg2dChkResFreq Frequency with which to check residual 5
cg2dMaxIters Maximum number of iterations in the 6
cg2dNorm A matrix normalisation factor. 12
cg2dNormaliseRHS flag set to TRUE if normalise RHS in the Solver 11
cg2dpcOffDFac Averaging weight for preconditioner off-diagonal. 8
cg2dPreCondFreq Frequency for updating cg2d preconditioner 7
cg2dTargetResidual 6
cg2dTargetResWunit 7
cg2dTolerance cg2d solver Tolerance (solver unit = m2/s2 or no unit, 10
cg2dTolerance_sq 3
CG3D Three-dim pre-con. conjugate-gradient solver. 2
CG3D Three-dim pre-con. conjugate-gradient solver. 0
CG3D Three-dim pre-con. conjugate-gradient solver. 0
CG3D Three-dim pre-con. conjugate-gradient solver. 0
CG3D Three-dim pre-con. conjugate-gradient solver. 0
cg3d_b Right Hand side vector of the 3-D solver equation A.x=B 47
cg3d_b Conjugate Gradient 3-D solver : Right-hand side vector 0
cg3d_b The source term or right hand side 0
cg3d_b Right Hand side vector of the 3-D solver equation A.X=B 0
CG3D_OUTERLOOPITERS 1
cg3d_q 21
CG3D_R 1
cg3d_r 18
cg3d_s 36
CG3D_WK_R 1
cg3d_x Solution vector of the 3-D solver equation A.x=B 17
cg3d_x The solution 0
cg3dChkResFreq Frequency with which to check residual 4
cg3dMaxIters Maximum number of iterations in the 5
cg3dNorm 7
cg3dTargetResidual 6
cgBeta 14
ch 6
CH 451
CH2 46
cH3 4
ch4 3
ch4ann 6
ch4bnd 5
ch4exp 26
CH4EXPS 2
CH4KDIS 2
ch4mn 7
changed flag indicating that a new forcing record must be read 80
char type of array arr : either RS or RL 3
char type of array arr : either RS or RL 0
char type of array arr : either RS or RL 0
char type of array arr : either RS or RL 0
char declaration of arr : either RS or RL 0
char declaration of arr : either RS or RL 0
char declaration of arr : either RS or RL 0
char declaration of arr : either RS or RL 0
char which array (fldRL/RS) to read into, either RL or RS 0
char which array (fldRL/RS) to read into, either RL or RS 0
char which array (fldRL/RS) to read into, either RL or RS 0
char which array (fldRL/RS) to read, either RL or RS 0
char declaration of arr : either RS or RL 0
char declaration of arr : either RS or RL 0
char declaration of arr : either RS or RL 0
char declaration of arr : either RS or RL 0
char declaration of arr : either RS or RL 0
char declaration of arr : either RS or RL 0
char declaration of arr : either RS or RL 0
char declaration of arr : either RS or RL 0
char declaration of arr : either RS or RL 0
char declaration of arr : either RS or RL 0
char declaration of arr : either RS or RL 0
char declaration of arr : either RS or RL 0
char declaration of arr : either RS or RL 0
char which array (fldRL/RS) to write, either RL or RS 0
char which array (fldRL/RS) to write, either RL or RS 0
char which array (fldRL/RS) to write, either RL or RS 0
char which array (fldRL/RS) to write, either RL or RS 0
char which array (fldRL/RS) to write, either RL or RS 0
char declaration of arr : either RS or RL 0
chardiag Character expression for diag to fill 30
chardiag Character expression for diag to fill 0
chardiag Character expression for diag to fill 0
chardiag Character expression for diag to fill 0
chardiag Character expression for diag to fill 0
chardiag Character expression for diag to fill 0
chardiag Character expression for diag to increment the counter 0
chardum 6
charval 2
CHEAPAML 2
CHEAPAML_2D_STATE 1
cheapaml_BulkCdn 7
CHEAPAML_CONST 2
CHEAPAML_FIELDS_LOAD 2
cheapaml_h 6
CHEAPAML_INIT_VARIA 2
cheapaml_kdiff 6
cheapaml_ntim 7
CHEAPAML_PARM01 2
CHEAPAML_PARM02 2
CHEAPAML_PARMS_C 1
CHEAPAML_PARMS_I 1
CHEAPAML_PARMS_L 1
CHEAPAML_PARMS_R 1
CHEAPAML_READ_PICKUP 1
CHEAPAML_READPARMS 2
cheapaml_taurelax2 6
CHEAPAML_VARS 1
CHEAPAML_WRITE_PICKUP 2
check logical to check for undefined values 19
Check 14
CHECK_ANALYLIC_THETA 2
CHECK_BALANCE 2
CHECK_ENERGY_CONSERV 3
CHECK_GETPWHERE 5
CHECK_PICKUP 2
CHECK_SALINITY_FOR_NEGATIVE_VALUES 3
CHECK_SETTINGS 1
check_sign 13
check_threads Validate multiple thread start up. 0
check_threads Validate multiple thread start up. 0
CHECK_THREADS 5
checkAdvSchAge 7
checkAdvSchArea 7
checkAdvSchHeff 5
checkAdvSchHEFF 2
checkAdvSchSalt 7
checkAdvSchSnow 7
checkIniSalt check for points with identically zero initial salinity 6
checkIniTemp check for points with identically zero initial Pot.Temp. 6
checkPtSuff List of checkpoint file suffices 9
checkRatio1 3
checkRatio2 4
chem_exports 1
chemistry_grid 1
chemistry_vars 1
chemo3 4
chemq 4
chfr fractional area covered by the tile [ib] 64
CHFR 3
chfrstr 69
chi 5
chk1 4
chk2 4
chk3 4
chk4 4
chk5 4
chk6 4
chkPtFreq Frequency of rolling check pointing ( s ). 13
CHKSUM_TILED 1
CHL 8
chlat 8
chList 8
chlon 29
chlt 28
ChNo 406
CHNO 319
CHOKE 6
CHPPRM 2
chronos 14
CHS heat exchange coefficient over sea 17
CI2 38
CI3 38
CI4 36
CI5 24
cig CITER (1) flag, (2) current, and | 0
cInputFe 2
Cinv 11
CJ 18
cj 2
ckind 10
Cl 3
CL 144
cL1 4
CLAND4OCEAN 1
CLAT cos(lat) (2-dim) 10
CLBOTH 3
clboth 1
CLDCLW 9
CLDFLX 3
cldfrc 4
cldhi 12
cldlow 12
CLDLS 1
cldls 5
cldlsp 11
cldlsp_lw 20
cldlsp_mem 5
cldlsp_sw 20
cldlsplwin 6
cldlspswin 6
cldlw 4
cldlz 13
cldmas 11
cldmid 12
cldmin 6
cldmxo 8
cldnow 11
cldprs 6
cldras 13
cldras_lw 21
cldras_mem 5
cldras_sw 21
cldraslwin 6
cldrasswin 6
CLDSCALE 2
cldsr 5
cldsw 4
cldtmp 6
cldtot 14
cldtot_lw 20
cldtot_sw 20
cldtotlwin 6
cldtotswin 6
cldwat 9
cldwater 13
clf ratio of grid spacing and time step 4
CLF 10
clfrac 1
CLFRAC 5
clh 1
CLH 7
clha 10
clim 10
CLIMATE2TEM 1
climsice 4
climsss 10
climsss0 6
climsss1 6
climsss_exfremo_intercept 5
climsss_exfremo_slope 5
climsss_lat0 6
climsss_lat_inc 7
climsss_lon0 6
climsss_lon_inc 6
climsss_nlat 7
climsss_nlon 6
climsssconst 5
climsssfile 12
climsssmask 4
climsssperiod 10
climsssstartdate 9
climsssstartdate1 5
climsssstartdate2 5
climsssTauRelax 7
climsst 17
climsst0 6
climsst1 6
climsst_exfremo_intercept 5
climsst_exfremo_slope 5
climsst_lat0 6
climsst_lat_inc 7
climsst_lon0 6
climsst_lon_inc 6
climsst_nlat 7
climsst_nlon 6
climsstconst 5
climsstfile 12
climsstmask 4
climsstperiod 10
climsststartdate 9
climsststartdate1 5
climsststartdate2 5
climsstTauRelax 7
climtempfreeze 7
climustr 9
climustr0 4
climustr1 4
climustr_exfremo_intercept 5
climustr_exfremo_slope 5
climustr_lat0 6
climustr_lat_inc 7
climustr_lon0 6
climustr_lon_inc 6
climustr_nlat 6
climustr_nlon 6
climustrconst 5
climustrfile 9
climustrmask 4
climustrperiod 9
climustrstartdate 8
climustrstartdate1 5
climustrstartdate2 5
climustrTauRelax 4
climvstr 9
climvstr0 4
climvstr1 4
climvstr_exfremo_intercept 5
climvstr_exfremo_slope 5
climvstr_lat0 6
climvstr_lat_inc 7
climvstr_lon0 6
climvstr_lon_inc 6
climvstr_nlat 6
climvstr_nlon 6
climvstrconst 5
climvstrfile 9
climvstrmask 4
climvstrperiod 9
climvstrstartdate 8
climvstrstartdate1 5
climvstrstartdate2 5
climvstrTauRelax 4
clindrag_1 8
clindrag_2 4
cll 3
CLM 3
CLM4MIT2D 1
CLMAXO 2
CLMO 3
clmo 2
clmt 1
CLMT 2
clmt53 1
CLMT53 2
CLN 4
cln 1
cLoc temporary value for level.1 heat capacity [J/m2/K] 4
CLOC 1
clog1 4
cloud fraction sky covered in cloud 10
cloud Temp for cloud 0
CLOUD 3
cloud0 6
cloud1 6
CLOUDC 21
CLOUDCtave total cloud cover (fraction) 9
CloudFile 7
cloudn 2
CLOUDN 1
clr 8
clrhi 5
clrlw 5
clrmd 5
CLRO 4
clro 5
CLRSKYDIAG 1
CLSBTH 6
clsbth 4
cltj10 3
CLTOP 9
CLTOPtave normalized pressure at cloud top 9
clwmo 4
cm 6
CM 7
CM1 11
CM2 5
cM2 4
cm3 1
CM3 4
cm4 1
CM4 2
cm5 1
CM5 2
CM6 3
CM7 4
cm8 1
CM8 2
CM8ARG 3
cmask 56
cmass 7
CMASS 6
CMax 2
CMAX 42
cmb2pa 3
CMB2PA 4
cMeanTheta 8
cMeanThetaUVel 5
cMeanThetaVVel 6
cMeanUVel 6
cMeanVVel 6
cmonob 5
cmpbug 2
cname 13
cnt 6
CNVCON 1
cnvprec 3
CO 3
co2 30
CO2 3
co24ocean 3
co24ocnan 6
co2atmos 6
co2bnd 6
co2exp 79
CO2EXPS 2
CO2flx_tave 10
CO2KDIS 2
co2s 6
co2star 3
CO3ITER 1
CO3iter 1
CO3ITERmax 1
CO3itermax 2
co3local 3
codt 3
coef 7
coef1 8
coef2 6
coef3 6
COEFF 9
coeff 1
cold 9
color 3
COLUMN 4
COMBINE_ENDS 3
combnd 5
comexp 20
COMEXPS 2
COMKDIS 2
comlev1 1
comm 63
COMM_GET 12
COMM_MSG 15
COMM_NONE 11
COMM_PUT 15
COMM_STATS Summarise inter-proc and inter-thread communication events. 4
COMM_STATS Summarise inter-proc and inter-thread communication events. 0
COMM_STATS Summarise inter-proc and inter-thread communication events. 0
COMM_STATS Summarise inter-proc and inter-thread communication events. 0
COMM_STATS Summarise inter-proc and inter-thread communication events. 0
comma 5
commClose 18
comment Descriptive comment for field 50
comment Descriptive comment for field 0
comment Descriptive comment for field 0
comment Descriptive comment for field 0
comment Descriptive comment for field 0
comment Descriptive comment for field 0
comment Descriptive comment for field 0
comment Descriptive comment for field 0
comment Descriptive comment for field 0
comment Descriptive comment for field 0
comment Descriptive comment for field 0
comment Descriptive comment for field 0
comment Descriptive comment for field 0
comment Descriptive comment for field 0
comment Descriptive comment for field 0
commentCharacter 4
commentcharacter 2
commFlag 6
commName 11
COMMON 693
common 289
commOpen 18
comp_orig 1
compact Flag to control use of repeat symbol for same valued 14
compact Flag to control use of repeat symbol for same valued 0
compact Flag to control use of repeat symbol for same valued 0
compile 4
compiler 4
compind 173
compName 6
component 27
component_List 4
COMPONENT_MODULE 64
component_Name 14
component_num_tiles 8
component_tile_i0 10
component_tile_j0 10
component_tile_nx 11
component_tile_ny 11
COMPRECV_R4 1
COMPRECV_R4TILES 1
COMPRECV_R8 1
COMPRECV_R8TILES 19
COMPSEND_R4 1
COMPSEND_R4TILES 1
COMPSEND_R8 1
COMPSEND_R8TILES 9
conam 5
conas 5
conbnd 4
conc1 7
conc2 5
conc3 5
concm 5
concs 7
concv 5
conexp 23
CONEXPS 2
CONFIG_CHECK 3
CONFIG_SUMMARY Provide synopsis of kernel setup. Includes annotated table of kernel parameter settings. 3
CONFIG_SUMMARY Provide synopsis of kernel setup. Includes annotated table of kernel parameter settings. 0
CONFIG_SUMMARY Provide synopsis of kernel setup. Includes annotated table of kernel parameter settings. 0
CONFIG_SUMMARY Provide synopsis of kernel setup. Includes annotated table of kernel parameter settings. 0
CONFIG_SUMMARY Provide synopsis of kernel setup. Includes annotated table of kernel parameter settings. 0
configuration 4
CONS_EmPmR 3
CONS_Qnet 3
CONSERV_BULKF 7
conservcycle 3
CONST 8
const 7
constim 3
CONTAINS 1
controlaux_apressure_r 1
controlaux_aqh_r 1
controlaux_atemp_r 1
controlaux_evap_r 1
controlaux_hflux_r 1
controlaux_lwdown_r 1
controlaux_lwflux_r 1
controlaux_obcse_r 1
controlaux_obcsn_r 1
controlaux_obcss_r 1
controlaux_obcsw_r 1
controlaux_precip_r 1
controlaux_runoff_r 1
controlaux_snowprecip_r 1
controlaux_sss_r 1
controlaux_sst_r 1
controlaux_swdown_r 1
controlaux_swflux_r 2
controlaux_ustress_r 1
controlaux_uwind_r 1
controlaux_vstress_r 1
controlaux_vwind_r 1
controlfiles_c 1
controlparams_r 1
controltimes_i 1
controltimes_r 1
controlvars_admtlm_r 1
controlvars_c 1
controlvars_i 1
controlvars_i_obcse 1
controlvars_i_obcsn 1
controlvars_i_obcss 1
controlvars_i_obcsw 1
controlvars_l 1
controlvars_r 1
controlvars_r_obcs 1
controlvars_r_openad 1
controlvec_header_c 1
controlvec_header_i 1
controlvec_header_r 1
conv Temp for Convection Count End points for interpolation 0
conv0 8
conv1 8
conv2d horizontal transport convergence [m^3/s] 12
conv_new 6
conv_precip conversion factor for precip: from g.m-2.s-1 to m/s 2
conv_precip conversion factor for precip: from g/m2/s to kg/m2/s 0
conv_Precip 1
conv_T2theta conversion factor from (absolute) Temp. to Pot.Temp. 3
conv_th2Heat 4
conv_theta2T 10
convadj 3
CONVECT Mix static instability. 0
CONVECT Mix static instability. 0
CONVECT Mix static instability. 0
CONVECT Mix static instability. 0
CONVECT Mix static instability. 0
CONVECT Mix static instability. 0
CONVECT Mix static instability. 0
CONVECT Mix static instability. 0
CONVECT Mix static instability. 0
CONVECT Mix static instability. 0
CONVECT Mix static instability. 0
CONVECT Mix static instability. 0
CONVECT Mix static instability. 0
CONVECT Mix static instability. 0
CONVECT Mix static instability. 0
ConvectCount Convection mixing freq. counter. 15
ConvectCount Convection freq. counter 0
ConvectCountTave Average number of convective adjustment event 8
CONVECTIVE_ADJUSTMENT Control static instability mixing. 2
CONVECTIVE_ADJUSTMENT Control static instability mixing. 0
CONVECTIVE_ADJUSTMENT Control static instability mixing. 0
CONVECTIVE_ADJUSTMENT Control static instability mixing. 0
CONVECTIVE_ADJUSTMENT Control static instability mixing. 0
CONVECTIVE_ADJUSTMENT Control static instability mixing. 0
CONVECTIVE_ADJUSTMENT Control static instability mixing. 0
CONVECTIVE_ADJUSTMENT Control static instability mixing. 0
CONVECTIVE_ADJUSTMENT Control static instability mixing. 0
CONVECTIVE_ADJUSTMENT Control static instability mixing. 0
CONVECTIVE_ADJUSTMENT_INI Control static instability mixing Extra time history interactions. 2
CONVECTIVE_ADJUSTMENT_INI Control static instability mixing Extra time history interactions. 0
CONVECTIVE_ADJUSTMENT_INI Control static instability mixing Extra time history interactions. 0
CONVECTIVE_ADJUSTMENT_INI Control static instability mixing Extra time history interactions. 0
CONVECTIVE_ADJUSTMENT_INI Control static instability mixing Extra time history interactions. 0
CONVECTIVE_WEIGHTS 3
CONVECTIVELY_MIXTRACER 6
convertFW2Salt salinity, used to convert Fresh-Water Flux to Salt Flux 29
convertFW2SaltLoc local copy of convertFW2Salt 5
convertHI2PRECIP 3
convertHI2Q 6
convertPRECIP2HI 5
convertQ2HI 7
ConvFile 9
CONVMF 2
convPrcEvp units conversion factor for Precip & Evap: from AIM units (g/m2/s) to model EmPmR units ( kg/m2/s ) 7
convrt 2
CONVRT 1
coord 2
Coord2longitude 5
coordLine 27
coordsSet can be interms of z, p or r. e.g. delZ or delP or delR for the vertical grid spacing. The following rules apply: All parameters must use the same vertical coordinate system. e.g. delZ and viscAz is legal but delZ and viscAr is an error. Similarly specifying delZ and delP is an error. zCoord..., pCoord..., rCoord... are used to flag when z, p or r are used. coordsSet counts how many vertical coordinate systems have been used to specify variables. coordsSet > 1 is an error. 18
copt 4
copy 4
copyTo if =T, copy buffer -> model ; if =F: copy buffer <- model 46
copyTo if =T, copy buffer -> model ; if =F: copy buffer <- model 0
copyTo if =T, copy 2-D -> 3-D ; if =F: copy 2-D <- 3-D 0
copyTo if =T, copy 2-D -> 3-D ; if =F: copy 2-D <- 3-D 0
copyTo if =T, copy 2-D -> 3-D ; if =F: copy 2-D <- 3-D 0
copyTo if =T, copy 2-D -> 3-D ; if =F: copy 2-D <- 3-D 0
copyTo flag to indicate tranfer direction. 0
copyTo flag to indicate tranfer direction. 0
copyTo flag to indicate tranfer direction. 0
copyTo flag to indicate tranfer direction. 0
COR_ICE 11
coriol 5
Coriol 1
corner 27
cornerMode 2
CORRECTION_STEP Pressure correction to momentum 2
CORRECTION_STEP Pressure correction to momentum 0
CORRECTION_STEP Pressure correction to momentum 0
CORRECTION_STEP Pressure correction to momentum 0
CORRECTION_STEP Pressure correction to momentum 0
CORRECTION_STEP Pressure correction to momentum 0
CORRECTION_STEP Pressure correction to momentum 0
CORRECTION_STEP Pressure correction to momentum 0
CORRECTION_STEP Pressure correction to momentum 0
CORRECTION_STEP Pressure correction to momentum 0
COSA 5
cosFacU 39
CosFacU 2
cosFacV 43
CosFacV 2
cosH 5
COSINEMETH_III 26
cosphi 89
cosPower Power of cosine of latitude to multiply viscosity 7
COST_ACCUMULATE_MEAN 2
COST_ARGO_SALT 3
COST_ARGO_THETA 3
COST_ATLANTIC 6
COST_ATLANTIC_HEAT 2
cost_aux_r 1
COST_AVERAGESFIELDS 7
COST_AVERAGESFLAGS 3
COST_AVERAGESGENERIC 18
COST_AVERAGESINIT 2
COST_BOTTOMDRAG 2
COST_BP 3
COST_BP_READ 3
COST_CHECK 2
COST_CTDS 3
COST_CTDSCLIM 1
COST_CTDT 3
COST_CTDTCLIM 1
COST_CURMTR 4
COST_DEPENDENT_INIT 5
COST_DEPTH 1
COST_DIFFKR 2
COST_DRIFT 4
COST_DRIFTER 4
COST_DRIFTW 4
COST_FINAL Cost function package. ( see pkg/cost ) 5
COST_FINAL Cost function package. ( see pkg/cost ) 0
COST_FINAL Cost function package. ( see pkg/cost ) 0
COST_FINAL Cost function package. ( see pkg/cost ) 0
COST_FINAL Cost function package. ( see pkg/cost ) 0
COST_FINAL_RESTORE 5
COST_FINAL_STORE 4
COST_FORCING 4
COST_FORCING_GEN 18
COST_GEN_TRANSPORT 2
COST_GENCOST_ALL 3
COST_GENCOST_ASSIGNPERIOD 2
COST_GENCOST_CUSTOMIZE 2
COST_GENCOST_SSHV4 2
COST_GENCOST_SSTV4 2
COST_GENERIC 9
COST_GEOID 2
COST_HFLUX 2
COST_HYD 5
cost_ice_flag 11
COST_ICE_TEST 3
COST_INIT Cost function package. ( see pkg/cost ) 0
COST_INIT Cost function package. ( see pkg/cost ) 0
COST_INIT Cost function package. ( see pkg/cost ) 0
COST_INIT Cost function package. ( see pkg/cost ) 0
COST_INIT Cost function package. ( see pkg/cost ) 0
COST_INIT_VARIA 2
COST_INTERNAL_PARAMS 3
cost_iprec 87
COST_KAPGM 2
COST_KAPREDI 2
COST_MEAN_HEATFLUX 4
COST_MEAN_R 1
COST_MEAN_SALTFLUX 4
cost_nml 2
COST_OBCS 4
COST_OBCS_AGEOS 1
COST_OBCSE 2
COST_OBCSN 2
COST_OBCSS 2
COST_OBCSVOL 1
COST_OBCSW 2
cost_objf 1
cost_param_r 1
COST_PROFILES 2
cost_r 1
COST_READARGOS 1
COST_READARGOT 1
COST_READERS 6
COST_READGEOID 2
COST_READGFO 6
COST_READPARMS Cost function package. see pkg/cost 2
COST_READPARMS Cost function package. see pkg/cost 0
COST_READPARMS Cost function package. see pkg/cost 0
COST_READPARMS Cost function package. see pkg/cost 0
COST_READPARMS Cost function package. see pkg/cost 0
COST_READSCATXFIELDS 2
COST_READSCATYFIELDS 2
COST_READTOPEX 6
COST_READTOPEXMEAN 5
COST_RESTORE_AVERAGESFLAGS 1
COST_SALT 3
COST_SALT0 3
COST_SALT_INI_FIN 4
COST_SCAT 4
COST_SLA_READ 13
COST_SLA_READ_YD 7
COST_SSH 4
COST_SSH_MEAN 3
COST_SSH_NEW 3
COST_SSHV4 3
COST_STATE_FINAL 2
cost_state_final_r 1
COST_STORE_AVERAGESFLAGS 1
COST_TAU_EDDY 3
COST_TEMP 2
COST_TEST 6
cost_test_i 1
COST_THETA 3
COST_THETA0 3
COST_THETA_INI_FIN 4
COST_TILE Cost function package. ( see pkg/cost ) 3
COST_TILE Cost function package. ( see pkg/cost ) 0
COST_TILE Cost function package. ( see pkg/cost ) 0
COST_TILE Cost function package. ( see pkg/cost ) 0
COST_TILE Cost function package. ( see pkg/cost ) 0
COST_TRACER 3
COST_TRANS_MERID 2
COST_TRANS_ZONAL 2
COST_TRANSPORT 1
COST_USERCOST_ALL 3
COST_VECTOR 2
cost_vector_r 1
COST_WEIGHTS 2
cost_weights_r 1
COST_XBT 3
cost_yftype 81
costIceEnd 5
costIceEnd1 5
costIceEnd2 5
costIceStart 5
costIceStart1 5
costIceStart2 5
costmean 14
costname 18
costTranspDataFile 8
COSWAT 26
COSWIN 20
COSZ 10
cosz 38
count0 record number for forcing field preceding mytime 85
count1 record number for forcing field following mytime 81
countc 1
counter 7
CountmlN 7
CountmlN_tile 5
CountmlS 7
CountmlS_tile 5
countT 6
countTime fractional integrated time 7
CounttN 7
CounttN_tile 5
CounttS 7
CounttS_tile 5
countTU 1
countTV 6
countU 6
countV 6
CountX 13
CountX_tile 5
COUPLE_MODEL 2
COUPLE_PARM 2
coupler 6
COUPLER 1
coupler_Name 6
couplerFlag 13
COUPRECV_R4 1
COUPRECV_R4TILES 1
COUPRECV_R8 1
COUPRECV_R8TILES 27
COUPSEND_R4 1
COUPSEND_R4TILES 1
COUPSEND_R8 1
COUPSEND_R8TILES 31
COZ1 3
COZ2 3
CP 66
cp 45
CP_INIT 1
cpAir specific heat of air [J/kg/K] 6
cpair 10
cpart 1
cpbg 1
CPBG 3
cpchr 3
CPD 5
CPEN 1
cpen 5
cphCADJ 1
cphi 1
cphm 3
cpIce specific heat of fresh ice [J/kg/K] 23
cpinv 6
CPL_ATM_PAR_I 1
CPL_ATM_PAR_L 1
CPL_ATM_PARAM 2
cpl_atmSendFrq Frequency^-1 for sending data to coupler (s) 5
cpl_atmSendFrq Frequency^-1 for sending data to coupler (s) 0
cpl_atmSendFrq Frequency^-1 for sending data to coupler (s) 0
CPL_CHEM 4
cpl_earlyExpImpCall call coupler early in the time stepping call sequence 25
cpl_earlyExpImpCall call coupler early in the time stepping call sequence 0
cpl_earlyExpImpCall call coupler early in the time stepping call sequence 0
cpl_earlyExpImpCall call coupler early in the time stepping call sequence 0
CPL_EXCH_CONFIGS 4
CPL_EXPORT_MY_DATA 4
CPL_IMPORT_EXTERNAL_DATA 4
CPL_INI_VARS 3
CPL_INIT 3
CPL_INIT_FIXED 3
CPL_NEM 4
CPL_OCEANCO2 12
CPL_OCN_PAR_L 1
CPL_OCN_PAR_R 1
CPL_OCN_PARAM 2
cpl_oldPickup restart from an old pickup (= until checkpoint 59h) 6
cpl_oldPickup restart from an old pickup (= until checkpoint 59h) 0
CPL_OUTPUT 3
CPL_PAR_I 1
CPL_READ_PARAMS 2
CPL_READPARMS 3
CPL_RECV_ATM_ATMCONFIG 2
CPL_RECV_ATM_FIELDS 2
CPL_RECV_OCN_FIELDS 4
CPL_RECV_OCN_OCNCONFIG 4
cpl_register Pass attributes to the coupler 0
CPL_REGISTER 3
CPL_REGISTER_ATM 2
CPL_REGISTER_OCN 4
CPL_SEND_ATM_FIELDS 2
CPL_SEND_ATM_OCNCONFIG 2
CPL_SEND_OCN_ATMCONFIG 4
CPL_SEND_OCN_FIELDS 4
cpl_snapshot_mdsio 4
cpl_snapshot_mnc 6
CPL_TAVE_VARS 1
cpl_taveFreq Frequency^-1 for time-Aver. output (s) 8
cpl_taveFreq Frequency^-1 for time-Aver. output (s) 0
CPL_TEM 12
CPL_timeAve Cumulated time [s] 22
cpl_timeave_mdsio 6
cpl_timeave_mnc 8
CPL_WRITE_PICKUP 3
cplCompName 6
CPLR_BUFFERS 1
CPLR_COMP_LIST 1
CPLR_COMPONENTS 1
CPLR_COUPLER 1
CPLR_IDENT 1
cplSendFrq_iter send data to coupler every cplSendFrq iter 21
cplTimeFraction 56
cpoel 6
cpog 4
CPOG 1
CPV 3
CPW 3
cpWater specific heat of water [J/kg/K] 10
cpwater 2
cpwv specific heat of water vapour [J/kg/K] 0
cqe 7
cquadrag_1 4
cquadrag_2 3
Cr slope ratio 34
Cr slope ratio 0
Cr slope ratio 0
Cr slope ratio 0
CR2 64
CR3 46
CR4 24
CR5 12
crain_ratio 2
CRAY 15
crif2 9
crifro 7
CriterionType 8
crtmsf 3
CRTMSF 2
crystal 10
Cs 3
cs 4
csAlb 12
csAlbNIR 12
Csat 6
cSep 5
csf 6
csha 11
csi 8
csLat 5
csm 22
CSOIL 13
CSOIL0 3
Cspd 5
CSR1 4
CSR2 4
cstanton_ n = 1,2 coefficients used to evaluate 0
cstanton_1 9
cstanton_2 9
cStantonS coefficients used to evaluate Stanton number (for 7
cStantonU 7
cstar 5
cswmo 5
csystemtime 2
ct 7
CT 7
CTDAY 6
ctds_errfile 2
ctdsclimfile 5
ctdsfile 7
ctdsobs 7
ctdt_errfile 2
ctdtclimfile 5
ctdtfile 7
ctdtobs 7
CTEI 3
cti 3
ctice 16
CTIN 2
ctmp 6
ctmt 21
CTOA 5
ctocn 16
CTRL_ADMTLM 1
CTRL_BOUND_2D 2
CTRL_BOUND_3D 2
CTRL_CHECK 2
ctrl_cost_weights_obcse 1
ctrl_cost_weights_obcsn 1
ctrl_cost_weights_obcss 1
ctrl_cost_weights_obcsw 1
CTRL_DELZNORM 3
CTRL_DEPTH_INI 2
ctrl_dummy 1
CTRL_GET_GEN 22
CTRL_GET_GEN_REC 7
CTRL_GETOBCSE 2
CTRL_GETOBCSN 2
CTRL_GETOBCSS 2
CTRL_GETOBCSW 2
CTRL_GETREC 3
CTRL_HFACC_INI 1
CTRL_INIT Control vector support package. see pkg/ctrl 4
CTRL_INIT Control vector support package. see pkg/ctrl 0
CTRL_INIT Control vector support package. see pkg/ctrl 0
CTRL_INIT Control vector support package. see pkg/ctrl 0
CTRL_INIT Control vector support package. see pkg/ctrl 0
CTRL_INIT_CTRLVAR 51
CTRL_INIT_OBCS_VARIABLES 2
CTRL_INIT_VARIABLES 2
CTRL_INIT_WET 2
CTRL_MAP_FORCING Control vector support package. ( see pkg/ctrl ) 3
CTRL_MAP_FORCING Control vector support package. ( see pkg/ctrl ) 0
CTRL_MAP_FORCING Control vector support package. ( see pkg/ctrl ) 0
CTRL_MAP_FORCING Control vector support package. ( see pkg/ctrl ) 0
CTRL_MAP_FORCING Control vector support package. ( see pkg/ctrl ) 0
CTRL_MAP_INI Control vector package.( see pkg/ctrl ) 2
CTRL_MAP_INI Control vector package.( see pkg/ctrl ) 0
CTRL_MAP_INI Control vector package.( see pkg/ctrl ) 0
CTRL_MAP_INI Control vector package.( see pkg/ctrl ) 0
CTRL_MAP_INI Control vector package.( see pkg/ctrl ) 0
CTRL_MAP_INI_ECCO 2
CTRL_MAP_INI_GEN2D 5
CTRL_MAP_INI_GEN3D 10
CTRL_MASK_SET_XZ 3
CTRL_MASK_SET_YZ 3
CTRL_NML 1
ctrl_nml 3
CTRL_OBCSBAL 2
CTRL_OBCSVOL 1
CTRL_PACK Control vector support package. see pkg/ctrl 10
CTRL_PACK Control vector support package. see pkg/ctrl 0
CTRL_PACK Control vector support package. see pkg/ctrl 0
CTRL_PACK Control vector support package. see pkg/ctrl 0
CTRL_PACK Control vector support package. see pkg/ctrl 0
CTRL_PACK_PRECISE 24
CTRL_PACKNAMES 1
ctrl_packnames 3
ctrl_param_trend_removal 1
CTRL_READPARMS 2
CTRL_SET_FNAME 200
CTRL_SET_GLOBFLD_XY 3
CTRL_SET_GLOBFLD_XYZ 3
CTRL_SET_GLOBFLD_XZ 3
CTRL_SET_GLOBFLD_YZ 3
CTRL_SET_OLD_MAXCVARS_30 1
CTRL_SET_OLD_MAXCVARS_40 1
CTRL_SET_PACK_XY 75
CTRL_SET_PACK_XYZ 36
CTRL_SET_PACK_XZ 7
CTRL_SET_PACK_YZ 7
CTRL_SET_PREC_32 1
CTRL_SET_UNPACK_XY 47
CTRL_SET_UNPACK_XYZ 24
CTRL_SET_UNPACK_XZ 5
CTRL_SET_UNPACK_YZ 5
CTRL_SMOOTH 3
CTRL_SUMMARY 1
CTRL_UNPACK Control vector support package. see pkg/ctrl 5
CTRL_UNPACK Control vector support package. see pkg/ctrl 0
CTRL_UNPACK Control vector support package. see pkg/ctrl 0
CTRL_UNPACK Control vector support package. see pkg/ctrl 0
CTRL_UNPACK Control vector support package. see pkg/ctrl 0
CTRL_UNPACK_PRECISE 12
CTRL_VOLFLUX 3
ctrl_weights_atmos_r 1
ctrl_weights_dummy_r 1
ctrl_weights_unit_r 1
ctrlname 22
ctrlprec 85
ctsave 6
CTSAVE 3
CU 19
cu 1
CUBED 1
CUBIC 3
cucld 1
CUCLD 3
CUIN 2
cumFld cumulative array (updated) 26
cumfric 8
cumulTime cumulated time for average 4
cumulWeight 4
cunit 464
cunit2 41
cunit3 41
curLev Cyclic global sum buffer levels. 11
curmtrufile 5
curmtruobs 6
curmtrvfile 5
curmtrvobs 6
currentdate 18
currentmonth 19
currentsecs 6
currentyear 15
curTime 7
cusertime 3
CUSTOMIZED 2
cutoff 18
CUU 14
CV 14
cv_count 37
cv_did 4
cv_start 37
cvapor_ Coeff to calculate Saturation Specific Humidity 0
cvapor_exp 6
cvapor_exp_ice 6
cvapor_fac 6
cvapor_fac_ice 6
CVDI 6
CVEL_SE 9
CVEL_SN 8
CVEL_SS 8
CVEL_SW 9
CVEL_TE 9
CVEL_TN 8
CVEL_TS 8
CVEL_TW 9
CVEL_UE 9
CVEL_UN 8
CVEL_US 8
CVEL_UW 9
CVEL_VE 9
CVEL_VN 8
CVEL_VS 8
CVEL_VW 9
CVEL_WE 9
CVEL_WN 8
CVEL_WS 8
CVEL_WW 9
cVelTimeScale 2
cvelTimeScale 6
cvname 22
cvprofiles 1
CVQ 7
cvq 3
CVTH 7
cvth 2
cvu 3
CVU 2
CVV 14
cw 9
CW_DIMS 30
CW_MAX_LOC 49
cwc 8
cwp 7
CYCLE_2D_TRACER 3
CYCLE_TRACER Move tracers forward in time. 4
CYCLE_TRACER Move tracers forward in time. 0
CYCLE_TRACER Move tracers forward in time. 0
CYCLE_TRACER Move tracers forward in time. 0
CYCLE_TRACER Move tracers forward in time. 0
CYCLE_TRACER Move tracers forward in time. 0
CYCLE_TRACER Move tracers forward in time. 0
CYCLE_TRACER Move tracers forward in time. 0
CYCLE_TRACER Move tracers forward in time. 0
CYCLE_TRACER Move tracers forward in time. 0
CZEN 58
CZEN2 15
CZENdaily 3
CZENdiurnal 5
czol 15