Symbol	Description	Uses
p0	surface pressure in mb	46
Pa2Atm	Conversion factor for atmospheric pressure pLoad (when coupled	6
PACKAGES		2
parfrac	fraction of Qsw that is PAR	7
PARM01		2
PARM01_ATM2D		2
PARM02		2
PARM02_ATM2D		2
PARM03		2
PARM03_ATM2D		2
PARM04		2
PARM04_ATM2D		2
PARM05		2
PARM05_ATM2D		2
pChkPtFreq	Frequency of permanent check pointing ( s ).	13
periodicExternalForcing	Set true if forcing is time-dependant	10
periodicExternalForcing_cheap		5
permil	set carbon mol/m3 <---> mol/kg conversion factor	22
PETSC_PRECOND_TYPE		5
PETSC_SOLVER_TYPE		5
phepsi		25
phiEuler	Euler angle, rotation about original z-axis	7
phiMin	unfortunate variable name ; replaced by ygOrigin	4
pickup_read_mnc	use mnc to read pickups	14
pickup_write_mnc	use mnc to write pickups	15
pickupStrictlyMatch	check and stop if pickup-file do not stricly match	36
pickupSuff	force to start from pickup files (even if nIter0=0)	63
ploadFile		1
PlumeMethod		9
PlumeRadius		8
postSolvTempIter	select flux calculation after surf. temp solver	10
PP81_PARM01		2
PPalpha		8
PPdiffMin		5
PPdumpFreq		5
PPMixingMaps		2
PPnRi		7
PPnu0		6
PPtaveFreq		6
PPviscMax		7
PPviscMin		5
PPwriteState		5
precip_errfile		6
precip_exfremo_intercept		5
precip_exfremo_slope		5
precip_interpMethod		7
precip_lat0		7
precip_lat_inc		7
precip_lon0		7
precip_lon_inc		7
precip_nlat		7
precip_nlon		7
precipconst		5
precipFile		6
precipfile		10
precipperiod		8
precipstartdate1		5
precipstartdate2		5
preDefTopol	pre-defined Topology selector: = 0 : topology defined from processing data.exch2 ; = 1 : simple, single facet topology; = 2 : customized topology (w2_set_myown_facets) = 3 : 6-face Cube (3 face-dims: nRed, nGreen, nBlue).	15
printMapIncludesZeros	Flag that controls whether character constant	7
printResidualFreq	Frequency for printing residual in CG iterations	19
profiles_nml		2
profilesDir		20
profilesDoGenGrid		13
profilesDoNcOutput		14
profilesfiles		17
psbarfile		16
psiEuler	Euler angle, rotation about new z-axis	7
psim_fac	coef used in turbulent fluxes calculation [-]	11
PSMIN		8
pSurfInitFile		8
PTRACERS_addSrelax2EmP	add Salt relaxation to EmP	9
PTRACERS_advScheme		22
PTRACERS_diffK4		6
PTRACERS_diffKh		6
PTRACERS_diffKr		5
PTRACERS_diffKrNr		9
PTRACERS_doAB_onGpTr	if Adams-Bashforth time stepping is used, apply	6
PTRACERS_dumpFreq		9
PTRACERS_EvPrRn	tracer concentration in Rain, Evap & RunOff	35
PTRACERS_ImplVertAdv	use Implicit Vertical Advection for this tracer	11
PTRACERS_initialFile		6
PTRACERS_Iter0	timestep number when tracers are initialized	19
PTRACERS_long_names		9
PTRACERS_monitor_mnc		12
PTRACERS_monitorFreq		9
PTRACERS_names		22
PTRACERS_numInUse	number of tracers to use	103
PTRACERS_PARM01		2
PTRACERS_pickup_read_mnc		12
PTRACERS_pickup_write_mnc		12
PTRACERS_ref	vertical profile for passive tracers, in	12
PTRACERS_resetFreq	Frequency (s) to reset ptracers to original val	6
PTRACERS_resetPhase	Phase (s) to reset ptracers	5
PTRACERS_snapshot_mnc		11
PTRACERS_startStepFwd	time to start stepping forward this tracer	7
PTRACERS_taveFreq	Frequency with which time-averaged PTRACERS	12
PTRACERS_timeave_mnc		12
PTRACERS_units		10
PTRACERS_useDWNSLP	true if Down-Sloping flow applies to pTracer n	7
PTRACERS_useGMRedi	true if GM-Redi applies to pTracer n	10
PTRACERS_useKPP	true if KPP applies to pTracer n	8
PTRACERS_useRecords	snap-shot output: put all pTracers in one file	7