Symbol Description Uses
ubarfile 19
udrifterrfile 5
udriftfile 5
uIceFile File containing initial sea-ice U comp. velocity 8
umax 5
umin minimum wind speed used in bulk-formulae [m/s] 22
uniformLin_PhiSurf Set to true to use a uniform Bo_surf in the 7
upwindShear use 1rst order upwind interp. (V.I., vertical advection) 9
upwindVorticity bias interpolation of vorticity in the Coriolis term 15
Urelaxobcsbound 12
Urelaxobcsinner 12
use3dCoriolis Turns the 3-D coriolis terms (in Omega.cos Phi) on - off 13
useAbsVorticity work with f+zeta in Coriolis terms 12
useAIM 35
useAltDeriv 5
useAnisotropicViscAgridMax Changed to be default behavior. Can 4
useAreaViscLength Set to true to use old scaling for viscous lengths, 7
useATM2D 5
useAtm_Phys 28
useAtmWind use wind vector (uwind/vwind) to compute 61
useBBL 22
useBetaPlaneF Coriolis coeff = f0 + beta.y (replaced by selectCoriMap=1) 4
useBOLUS 5
useBulkForce use surf. fluxes from bulk-forcing external S/R 20
useCAL 26
useCDscheme use CD-scheme to calculate Coriolis terms. 25
useCentralDiff 6
useCFC flag to turn on/off CFC pkg 12
useCheapAML 20
useCheapTracer use passive tracer option (off by default) 21
useClouds use clouds option (off by default) 13
useConstantF Coriolis coeff set to f0 (replaced by selectCoriMap=0) 4
useCoriolis Flag which turns the coriolis terms on and off. 12
useCoupler use Coupler for a multi-components set-up. 28
useCubedSphereExchange use Cubed-Sphere topology domain. 92
useDARWIN flag to turn on/off darwin pkg 17
useDiagnostics 203
useDIC flag to turn on/off DIC pkg 19
useDLongWave use imported downward longwave (off by default) 14
useDOWN_SLOPE 20
useEBM 9
useECCO 6
useEMBED_FILES 7
useEnergyConservingCoriolis 7
useEXF use surf. fluxes from exf external S/R 39
useExfCheckRange check range of input/output field values 6
useExfYearlyFields when set, automatically add extension 38
useExfZenIncoming compute incoming solar radiation along with zenith angle 9
useFixedCEast 9
useFixedCWest 9
useFizhi 9
useFLT 12
useFluxFormula_AIM set to T when using AIM flux formula rather 10
useFluxLimit use flux limiting advection (off by default) 13
useFRAZIL 12
useFreshWaterFlux option to include evap+precip (on by default) 19
useFullLeith Set to true to use full Leith viscosity(may be unstable 8
useGCHEM 19
useGCMwVel 5
useGGL90 26
useGGL90inAdMode 8
useGMRedi 50
useGMRediInAdMode 8
useGrdchk 7
useGridAlt 6
useHB87stressCoupling use an intergral over ice and ocean surface 5
useHibler79IceStrength if true original ice strength parameterization 8
useICEFRONT 17
useImportCO2 True => use the Imported atmos. CO2 from coupler 9
useImportFIce True => use the Imported Sea-Ice fraction (DIC-only) 6
useImportFlxCO2 True => use the Imported air-sea CO2 fluxes from coupler 8
useImportFW True => use the Imported Fresh Water flux fr cpl 10
useImportHFlx True => use the Imported HeatFlux from couler 8
useImportMxlD True => use Imported Mix.Layer Detph from coupler 6
useImportSIce True => use the Imported Sea-Ice mass as ice-loading 12
useImportSLP True => use the Imported Sea-level Pressure 13
useImportSSS True => use the Imported SSS from coupler 6
useImportSST True => use the Imported SST from coupler 8
useImportTau True => use the Imported Wind-Stress from couler 7
useImportVsq True => use the Imported Surf. velocity^2 6
useImportWSpd True => use the Imported surface Wind speed fr cpl 9
useISOMIPTD use simple ISOMIP thermodynamics 8
useJamartMomAdv Use wet-point method for V.I. non-linear term 7
useJamartWetPoints Use wet-point method for Coriolis (Jamart & Ozer 1986) 9
useKL10 16
useKPP 49
useKPPinAdMode 8
useLand 18
useLayers 20
useMATRIX 14
useMaykutSatVapPoly use Maykut Polynomial for saturation vapor pressure 8
useMissingValue put MissingValue where mask = 0 (NetCDF output only) 8
useMNC 146
useMY82 19
useMYPACKAGE 25
useNEST_CHILD use Child Nesting interface (pkg/nest_child) 16
useNEST_PARENT use Parent Nesting interface (pkg/nest_parent) 11
useNHMTerms If TRUE use non-hydrostatic metric terms. 12
useOASIS use OASIS-coupler for a multi-components set-up. 12
useOBCS 63
useOBCSYearlyFields when reading Open-Boundary values, assume yearly 20
useObsEmP 5
useObsRunoff 5
useOffLine 20
useOldFreezing use the old version (before checkpoint52a_pre, 2003-11-12) 4
useOPPS 11
useOrlanskiEast 15
useOrlanskiNorth 15
useOrlanskiSouth 15
useOrlanskiWest 15
usePickupBeforeC35 to restart from old-pickup files (generated with code 4
usePickupBeforeC54 start from old-pickup files, generated with code from 10
usePP81 20
usePROFILES 21
usePTRACERS 53
usePW79thermodynamics use 0-layer thermodynamics as described in 12
useRBCptracers 3
useRBCpTrNum 6
useRBCS 24
useRBCsalt 7
useRBCtemp 7
useRBCuVel 14
useRBCvVel 14
usercost_datafile 4
usercost_errfile 4
useRealFreshWaterFlux if True (=Natural BCS), treats P+R-E flux 59
useREGRID 10
useRelativeWind Subtract U/VVEL or U/VICE from U/VWIND before 8
useRunClock 10
useSALT_PLUME 36
useSALT_PLUMEinAdMode 8
useSBO 10
useSEAICE 60
useSEAICEinAdMode 10
useSETRLSTK 6
useSHAP_FILT 11
useShelfIce 33
useSIGREG 8
useSingleCpuInput When useSingleCpuInput is set, EXF_INTERP_READ 7
useSingleCpuIO When useSingleCpuIO is set, MDS_WRITE_FIELD outputs from 28
useSmag3D Use isotropic 3-D Smagorinsky 14
useSMOOTH 27
useSmoothCorrel2DinAdMode 8
useSphereF Coriolis = 2.omega.sin(phi) (replaced by selectCoriMap=2) 4
useSRCGSolver Set to true to use conjugate gradient 7
useStabilityFct_overIce over sea-ice, compute turbulent transfert 6
useStevensAdvection 5
useStevensEast 16
useStevensNorth 16
useStevensPhaseVel 5
useStevensSouth 16
useStevensWest 16
useStrainTensionVisc Set to true to use Strain-Tension viscous terms 8
useStreamIce 10
useStressOption use stress option (off by default) 18
useThSIce 54
useTimeVarBLH use time varying BL height option (off by default) 8
useZONAL_FILT 15
using_cost_altim 14
using_cost_bp 10
using_cost_scat 11
using_cost_seaice 9
using_cost_sst 15
using_ers 9
using_gencost 17
using_gfo 9
using_topex 9
usingCartesianGrid If TRUE grid generation will be in a cartesian 27
usingCurvilinearGrid If TRUE, use a curvilinear grid (to be provided) 41
usingCylindricalGrid If TRUE grid generation will be Cylindrical 21
usingMPI 51
usingSphericalPolarGrid If TRUE grid generation will be in a 40
ustress_exfremo_intercept 5
ustress_exfremo_slope 5
ustress_interpMethod 12
ustress_lat0 8
ustress_lat_inc 8
ustress_lon0 8
ustress_lon_inc 8
ustress_nlat 9
ustress_nlon 8
ustressconst 5
UStressFile 8
ustressfile 18
ustressperiod 11
ustressstartdate1 5
ustressstartdate2 5
uvel0errfile 6
UvelFile 5
uVelInitFile 15
uwind_errfile 6
uwind_exfremo_intercept 5
uwind_exfremo_slope 5
uwind_interpMethod 10
uwind_lat0 8
uwind_lat_inc 8
uwind_lon0 8
uwind_lon_inc 8
uwind_nlat 9
uwind_nlon 8
uwindconst 5
UWindFile 15
uwindfile 14
uwindperiod 11
uwindstartdate1 5
uwindstartdate2 5