Symbol Description Uses
C Maximum number of processes allowed. 105
C Maximum number of distinct thread barriers 0
C Maximum buffer size for Global Vector Sum 0
C the actual residual reached 0
C Inp: decide to store (if >=0) or not (if <0) lowest res. sol. 0
C the actual residual reached 0
C Inp: decide to store (if >=0) or not (if <0) lowest res. sol. 0
c missing value for integers to use in output stream #n 37
c level and tile indices used for weighting (mask,area ...) 0
c parser field with characteristics of the diagnostics 0
C used for mapping tiled file to global file 0
c CV (coordinate variable) name 0
c CV start,end indicies ----+ 0
c CV index 0
C cumulated snow precipitation (+=down) [kg/m2/s] 0
c0 22
c0mm 3
c1 intN0/pi 59
c1 coefficients in quadratic eqn for T1 0
C1 120
c10 coefficients in quadratic eqn for T1 3
c1Frz 3
c1Mlt 3
c1Set1 1rst digit (from left) of 1rst set of labels 7
c1Set2 1rst digit (from left) of 2nd set of labels 4
c1Set3 1rst digit (from left) of 3rd set of labels 4
c2 45
C2 52
c2Frz 4
c2Mlt 4
c2Set1 2nd digit (from left) of 1rst set of labels 4
c2Set2 2nd digit (from left) of 2nd set of labels 6
c2Set3 2nd digit (from left) of 3rd set of labels 4
c3 36
C3 4
c3d matrix upper diagnonal 36
c3d upper diagonal of the tridiagonal matrix 0
c3d upper diagonal of the tridiagonal matrix 0
c3d upper diagonal of the tridiagonal matrix 0
c3d upper diagonal of eigenvalue problem 0
c3d_m1 6
c3d_prime 16
C4 4
C5 4
c5d main diagonal of the pentadiagonal matrix 79
c5d modified to enable to find Xp solution of 0
c5d main diag of pentadiagonal matrix 0
c5d main diagonal of the pentadiagonal matrix 0
c5d main diag of pentadiagonal matrix 0
c5d_prime 12
C_basal_fric_const 9
C_basal_friction 14
c_basal_friction_ad 3
ca 3
cacheLineSize 36
cAdjFreq Frequency of convective adjustment 19
caexport flux of carbonate from base each productive 9
caexport flux of carbonate from base each productive 0
cag 3
cah 13
caib 23
caif 10
CAL_ADDTIME 14
CAL_CHECKDATE 2
cal_CompDates 6
CAL_CONVDATE 20
CAL_COPYDATE 28
CAL_DAYSFORMONTH 1
CAL_DAYSPERMONTH 1
CAL_FULLDATE 47
CAL_GETDATE 32
CAL_GETMONTHSREC 8
CAL_INIT_FIXED 2
cal_IntDays 9
cal_IntMonths 10
cal_Intmonths 1
cal_IntYears 10
cal_IsLeap 34
CAL_ISLEAP 1
CAL_MONTHSFORYEAR 1
CAL_MONTHSPERYEAR 1
CAL_NML 1
cal_nml 1
cal_NumInts 6
CAL_PRINTDATE 13
CAL_PRINTERROR 33
CAL_READPARMS 2
CAL_SET 2
cal_setStatus status of calendar parms setting (0=none, 3=fully set) 30
CAL_STEPSFORDAY 1
CAL_STEPSPERDAY 1
CAL_SUBDATES 3
CAL_SUMMARY 2
CAL_TIME2DUMP 17
CAL_TIMEINTERVAL 18
CAL_TIMEPASSED 40
CAL_TIMESTAMP 1
CAL_TOSECONDS 38
CAL_WEEKDAY 1
CALC_1DTO2D 2
CALC_3D_DIFFUSIVITY 8
CALC_ADV_FLOW 4
CALC_COMMON_FACTORS Calculate common data (such as volume flux) 0
CALC_CS_CORNER_EXTENDED 8
CALC_DIFFUSIVITY Calculate net vertical diffusivity 0
CALC_DIV_GHAT Form the RHS of the surface pressure eqn. 2
CALC_EDDY_STRESS 2
CALC_EP_FORCING 1
CALC_EXACT_ETA Change SSH to flow divergence. 0
CALC_EXACT_ETA Change SSH to flow divergence. 0
CALC_EXACT_ETA Change SSH to flow divergence. 0
CALC_FILELOAD 2
calc_fluxes_X logical to indicate to calculate fluxes in X dir 30
calc_fluxes_X logical to indicate to calculate fluxes in X dir 0
calc_fluxes_X logical to indicate to calculate fluxes in X dir 0
calc_fluxes_X logical to indicate to calculate fluxes in X dir 0
calc_fluxes_Y logical to indicate to calculate fluxes in Y dir 26
calc_fluxes_Y logical to indicate to calculate fluxes in Y dir 0
calc_fluxes_Y logical to indicate to calculate fluxes in Y dir 0
calc_fluxes_Y logical to indicate to calculate fluxes in Y dir 0
CALC_GRAD_PHI_FV 2
CALC_GRAD_PHI_HYD 2
CALC_GRAD_PHI_SURF Return DDx and DDy of surface pressure 3
CALC_GRAD_PHI_SURF Calculate the gradient of the surface 0
CALC_GRAD_PHI_SURF Return DDx and DDy of surface pressure 0
CALC_GRAD_PHI_SURF Calculate the gradient of the surface 0
CALC_GRAD_PHI_SURF Return DDx and DDy of surface pressure 0
CALC_GRAD_PHI_SURF Calculate the gradient of the surface 0
CALC_GRAD_PHI_SURF Return DDx and DDy of surface pressure 0
CALC_GRID_ANGLES 3
CALC_GS Calculate the salinity tendency terms 0
CALC_GS Calculate the salinity tendency terms 0
CALC_GT Calculate the temperature tendency terms 0
CALC_GT Calculate the temperature tendency terms 0
CALC_GTR1 Calculate other tracer(s) tendency terms 0
CALC_GW vert. momentum tendency terms ( NH, QH only ). 2
CALC_GW vert. momentum tendency terms (Non-Hydrostatic) 0
CALC_GW vert. momentum tendency terms (Non-Hydrostatic) 0
CALC_GW_NEW_THICK 1
CALC_IVDC Set Implicit Vertical Diffusivity for Convection 2
CALC_OCE_MXLAYER 2
CALC_PCO2 1
CALC_PCO2_APPROX 4
CALC_PHI_HYD Integrate the hydrostatic relation. 3
CALC_PHI_HYD Integrate the hydrostatic relation. 0
CALC_PHI_HYD Integrate the hydrostatic relation. 0
CALC_R_STAR 4
CALC_SURF_DR Calculate the new surface level thickness. 4
CALC_SURF_DR Calculate the new surface level thickness. 0
CALC_VISCOSITY Calculate net vertical viscosity 2
CALC_VISCOSITY Calculate net vertical viscosity 0
CALC_VISCOSITY Calculate net vertical viscosity 0
CALC_WGHT2D 3
CALC_WSURF_TR 2
calc_wVelocity Turns of vertical velocity calculation off 5
CALC_ZONAL_MEANS 3
calcAdvection =False if Advec computed with multiDim scheme 18
calcCFL =T: calculate CFL number ; =F: take uFld as CFL 30
calcCFL =T: calculate CFL number ; =F: take vFld as CFL 0
calcCFL =T: calculate CFL number ; =F: take uFld as CFL. 0
calcCFL =T: calculate CFL number ; =F: take vFld as CFL 0
calcCFL =T: calculate CFL number ; =F: take uFld as CFL 0
calcCFL =T: calculate CFL number ; =F: take vFld as CFL 0
calcConvect 9
calcGMRedi 8
CALCITE_SATURATION 2
calcium 3
calcKPP 6
calcLeith 8
calcLonCS 4
calcMeanResid also compute mean residual (=RMS) 4
calcMixLayerDepth 6
calcSmag 5
calcWindStress True to calculate Wind-Stress from surface wind 6
caldate 12
caldates 3
CALENDAR_C 1
CALENDAR_I 1
CALENDAR_L 1
CALENDAR_RL 1
calendarDumps moved to package cal (calendar) 9
calendarDumps When set, approximate months (30-31 days) and years (360-372 days) 0
calerr 18
caller_sub name of subroutine which is calling this S/R 10
caller_sub name of subroutine which is calling this S/R 0
callerSubR name of subroutine which is calling this S/R 19
callProc procedure calling this routine 7
calpfe 2
calpha 2
caltoj 3
CALTOJ 4
CAN_PREVENT_X_PERIODICITY 1
CAN_PREVENT_Y_PERIODICITY 1
CANNOT 1
capac 22
CAPAC 40
capacity 5
cape 3
capeflag 2
CAR carbonate changes due to biological 4
car 3
CAR_DISS 2
CAR_FLUX 2
CAR_FLUX_OMEGA_TOP 2
CAR_S carbonate source 10
CAR_S carbonate sink 0
CARave 9
CARBON_CHEM 1
CARBON_COEFFS 3
CARBON_COEFFS_PRESSURE_DEP 2
carbon_diff 12
CARBON_NEEDS 1
carbonate 3
carg 31
caruptfile 3
case 1
CASE 10
casea 16
caseA 2
cAtmp 3
cause 5
CAVAIL 15
CB 5
cb 19
CBMF 13
CBMFtave cloud-base mass flux 9
cBtmp 3
cbuf 7
cbuff 94
cbuffGlobal 2
cbuffindex 234
cbuftmp 9
cc 63
CC 517
cc0 4
cc1 3
cc2 3
cc3t 4
CCC 6
ccFlds 5
ccHead 5
ccLine 17
ccList 5
cco2flux 8
CD 4
Cd 2
cd 3
Cd10 3
CD_CODE_INI_VARS 2
CD_CODE_INIT_FIXED 2
CD_CODE_NO_AB_CORIOLIS 3
CD_CODE_NO_AB_MOMENTUM 4
CD_CODE_READ_PICKUP 2
CD_CODE_SCHEME 2
CD_CODE_WRITE_PICKUP 2
CDAIR local wind stress coefficient (used twice) 20
cDalton coefficient used to evaluate Dalton number (for Evap) 10
cdalton coefficient used to evaluate the Dalton number 7
CDEEPS 6
CDENVV surf. heat flux (sens.,lat.) coeff including stability effect 45
CDENVV surf. heat flux (sens.,lat.) coeff including stability effect 0
CDENVV surf. heat flux (sens.,lat.) coeff including stability effect 0
CDENVV surf. heat flux (sens.,lat.) coeff including stability effect 0
cdepth 4
cdf 6
cdi 6
cdiag list of available diagnostic names 109
cdiag list of available diagnostic names 0
CDL 6
cDopp Quasi-Doppler shifted long Rossby wave speed (m/s) 7
cdq 13
cdq_0 3
cDrag_ n = 1,2,3 coefficients used to evaluate drag coefficient 0
cdrag_ n = 1,2,3 coefficients used to evaluate 0
cDrag_1 5
cdrag_1 18
cDrag_2 5
cdrag_2 18
cDrag_3 5
cdrag_3 18
cdrc 9
CDS 7
cdsc 10
cdscrip 9
cdt CV data pool <-------+ 0
cdu surface drag coeff (for wind stress) 6
CE 4
cekman 5
CellIndex 7
celsius2K convert centigrade (Celsius) degree to Kelvin 46
Celsius2K 2
cen2kel conversion of deg. Centigrade to Kelvin 14
cenc 6
centreX used for calculating averages at centre of cell 9
CentreX 1
centreY used for calculating averages at centre of cell 10
cF Coriolis acceleration 2
Cf 4
cf 15
cFac 1 for conservative form, 0, otherwise 10
cfac 1
CFAC 2
cfc11 23
CFC11 3
CFC11_CHEM 1
CFC11_FORCING 2
CFC11_SURFFORCING 2
cfc12 23
CFC12 3
CFC12_FORCING 2
CFC12_SURFFORCING 2
cfc22 23
CFC22 3
CFC_2D_FIELDS 1
CFC_ATMOS 2
CFC_ATMOS_I 1
CFC_ATMOS_R 1
CFC_atmospFile file name of atmospheric pressure 10
CFC_CHECK 2
CFC_FIELDS_LOAD 2
CFC_FILENAMES 1
CFC_FORCING 2
CFC_forcingCycle periodic-cycle freq for CFC forcing (seconds) 12
CFC_forcingPeriod record spacing time for CFC forcing (seconds) 6
CFC_iceFile file name of seaice fraction 11
CFC_ldRec time-record currently loaded (in temp arrays *[1]) 7
CFC_LOAD 1
CFC_LOAD_I 1
CFC_monFreq frequency (s) to monitor CFC 7
CFC_PARAM 2
CFC_PARAMS_R 1
CFC_READPARMS 2
CFC_SCHMIDT_NO 1
CFC_windFile file name of wind speeds 12
cfcexp 7
CFCEXPS 4
CFCKDIS 4
cfcTime 8
cfeload 2
cfFacMom Coriolis term tracer parameter 8
cfice 18
cfile 33
cfile2 60
cfile3 60
CFix 2
CFIX 12
cfl 61
CFL 8
cflan 19
cflMer ratio of grid spacing and time step 17
cflux carbonate flux 27
cflux carbonate flux 0
cflux carbonate changes due to flux and remineralization 0
cfluxave 9
cflZon 17
cfm 3
cfname 9
cg ground heat capacity [J/m2/K](2 levels) 30
CG2D Two-dim pre-con. conjugate-gradient. 3
CG2D Two-dim pre-con. conjugate-gradient. 0
CG2D Two-dim pre-con. conjugate-gradient. 0
cg2d_b Conjugate Gradient 2-D solver : Right-hand side vector 66
cg2d_b The source term or right hand side (output: normalised RHS) 0
cg2d_b The source term or right hand side (output: normalised RHS) 0
cg2d_b The source term or right hand side (Output: normalised RHS) 0
cg2d_b The source term or right hand side (output: normalised RHS) 0
CG2D_EX0 2
CG2D_I_L 1
CG2D_I_R 1
CG2D_I_WK_R 1
CG2D_I_WK_R2 1
CG2D_I_WK_R3 1
cg2d_min used to store solution corresponding to lowest residual. 12
cg2d_min used to store solution corresponding to lowest residual. 0
cg2d_min used to store solution corresponding to lowest residual. 0
cg2d_min used to store solution corresponding to lowest residual. 0
cg2d_min used to store solution corresponding to lowest residual. 0
cg2d_min used to store solution corresponding to lowest residual. 0
CG2D_NSA 2
CG2D_OUTERLOOPITERS 3
cg2d_q Intermediate matrix-vector product term 26
cg2d_q Intermediate matrix-vector product term 0
cg2d_r *same* 80
cg2d_r *same* 0
cg2d_s *same* 51
cg2d_s *same* 0
CG2D_SINGLECPU_SUM 10
CG2D_SR 2
cg2d_v z times the operator 6
cg2d_x The solution (input: first guess) 91
cg2d_x The solution (input: first guess) 0
cg2d_x The solution (Input: first guess) 0
cg2d_x The solution (input: first guess) 0
cg2d_x Solution vector of the 2-D solver equation a.x=b 0
cg2d_y residual scaled by preconditioner 16
cg2d_z Intermediate matrix-vector product term reduces the number of recomputation in adjoint mode this field is superfluous if your cg2d is self-adjoint. 6
cg2dChkResFreq Frequency with which to check residual 5
cg2dMaxIters Maximum number of iterations in the 7
cg2dNorm A matrix normalisation factor. 14
cg2dNormaliseRHS flag set to TRUE if normalise RHS in the Solver 15
cg2dpcOffDFac Averaging weight for preconditioner off-diagonal. 9
cg2dPreCondFreq Frequency for updating cg2d preconditioner 7
cg2dTargetResidual 7
cg2dTargetResWunit 7
cg2dTolerance cg2d solver Tolerance (solver unit = m2/s2 or no unit, 13
cg2dtolerance 1
cg2dTolerance_sq 16
cg2dUseMinResSol =0 : use last-iteration/converged solution 12
CG3D Three-dim pre-con. conjugate-gradient solver. 2
CG3D Three-dim pre-con. conjugate-gradient solver. 0
CG3D Three-dim pre-con. conjugate-gradient solver. 0
cg3d_b Right Hand side vector of the 3-D solver equation A.x=B 55
cg3d_b Conjugate Gradient 3-D solver : Right-hand side vector 0
cg3d_b The source term or right hand side (output: normalised RHS) 0
cg3d_b The source term or right hand side (output: normalised RHS) 0
cg3d_b Right Hand side vector of the 3-D solver equation A.X=B 0
CG3D_EX0 2
CG3D_OUTERLOOPITERS 2
cg3d_q 39
CG3D_R 1
cg3d_r 33
cg3d_s 69
CG3D_WK_R 1
cg3d_x Solution vector of the 3-D solver equation A.x=B 34
cg3d_x The solution (input: first guess) 0
cg3d_x The solution (input: first guess) 0
cg3dChkResFreq Frequency with which to check residual 4
cg3dMaxIters Maximum number of iterations in the 5
cg3dNorm 10
cg3dTargetResidual 8
cg3dTolerance_sq 8
cg_Bu 21
cg_bu 1
cg_Bv 17
cg_bv 1
cg_halo 32
cg_iters 3
cg_tauU 3
cg_tauV 3
cg_Uin 42
cg_Vin 42
cgBeta coeff used to update conjugate direction vector s . 24
cgBeta coeff used to update conjugate direction vector s . 0
cgBeta coeff used to update conjugate direction vector s . 0
cgBeta coeff used to update conjugate direction vector s . 0
cgBeta coeff used to update conjugate direction vector s . 0
cgBeta coeff used to update conjugate direction vector s . 0
cgtol 6
ch 6
CH 451
Ch10 3
CH2 46
cH3 4
ch4 3
ch4ann 8
ch4bnd 5
ch4exp 26
CH4EXPS 2
CH4KDIS 2
ch4mn 8
changed flag indicating that a new forcing record must be read 96
char type of array arr : either RS or RL 3
char type of array arr : either RS or RL 0
char type of array arr : either RS or RL 0
char type of array arr : either RS or RL 0
char declaration of arr : either RS or RL 0
char declaration of arr : either RS or RL 0
char declaration of arr : either RS or RL 0
char declaration of arr : either RS or RL 0
char which array (fldRL/RS) to read into, either RL or RS 0
char which array (fldRL/RS) to read into, either RL or RS 0
char which array (fldRL/RS) to read into, either RL or RS 0
char which array (fldR8/R4) to read, either R8 or R4 0
char which array (fldRL/RS) to read, either RL or RS 0
char declaration of arr : either RS or RL 0
char declaration of arr : either RS or RL 0
char declaration of arr : either RS or RL 0
char declaration of arr : either RS or RL 0
char declaration of arr : either RS or RL 0
char declaration of arr : either RS or RL 0
char declaration of arr : either RS or RL 0
char declaration of arr : either RS or RL 0
char declaration of arr : either RS or RL 0
char declaration of arr : either RS or RL 0
char declaration of arr : either RS or RL 0
char declaration of arr : either RS or RL 0
char which array (fldRL/RS) to write, either RL or RS 0
char which array (fldRL/RS) to write, either RL or RS 0
char which array (fldRL/RS) to write, either RL or RS 0
char which array (fldR8/R4) to write, either R8 or R4 0
char which array (fldRL/RS) to write, either RL or RS 0
char which array (fldRL/RS) to write, either RL or RS 0
chardiag Character expression for diag to fill 32
chardiag Character expression for diag to fill 0
chardiag Character expression for diag to fill 0
chardiag Character expression for diag to fill 0
chardiag Character expression for diag to fill 0
chardiag Character expression for diag to fill 0
chardum 6
charn 5
charval 2
cheap Adams-Bashforth restart status for prognostic variable [] 0
cheap_clFile 9
cheap_dlwFile 9
cheap_hFile 11
cheap_pr1 precipitation time constant 5
cheap_pr2 precipitation time constant 5
cheap_prFile 4
CHEAPAML 2
cheapaml_BulkCdn 4
CHEAPAML_COARE3_FLUX 5
CHEAPAML_CONST 2
CHEAPAML_COPY_EDGES 7
CHEAPAML_DIAGNOSTICS_INIT 2
CHEAPAML_FIELDS_LOAD 2
CHEAPAML_GAD_C2_ADV_R 2
CHEAPAML_GAD_DST3FL_ADV_R 2
cheapaml_h 7
CHEAPAML_INIT_FIXED 2
CHEAPAML_INIT_VARIA 2
cheapaml_kdiff 8
CHEAPAML_LANL_FLUX 2
cheapaml_mask_width 5
Cheapaml_mask_width 1
cheapaml_ntim 7
CHEAPAML_PARM01 2
CHEAPAML_PARM02 2
CHEAPAML_PARMS_C 1
CHEAPAML_PARMS_I 1
CHEAPAML_PARMS_L 1
CHEAPAML_PARMS_R 1
CHEAPAML_READ_PICKUP 2
CHEAPAML_READPARMS 2
CHEAPAML_SEAICE 2
cheapaml_taurelax 7
cheapaml_taurelaxocean 6
CHEAPAML_TIMESTEP 6
CHEAPAML_VARS 1
CHEAPAML_WRITE_PICKUP 2
cheapamlXperiodic domain (including land) is periodic in X dir 21
cheapamlXperiodic cheapaml domain is periodic in X dir 0
cheapamlYperiodic domain (including land) is periodic in Y dir 20
cheapamlYperiodic cheapaml domain is periodic in Y dir 0
cheapcl 0
cheapcl0 5
cheapcl1 5
Cheapclouds 14
cheapclouds 2
Cheapdlongwave 13
cheapdlongwave 4
cheaph 0
cheaph0 5
cheaph1 5
CheapHgrid 19
cheapHgrid 2
cheaphgrid 2
cheaplw 0
cheaplw0 5
cheaplw1 5
Cheapmask open boundary condition relaxation mask 15
CheapMask 1
cheapMaskFile 8
cheapPrecip precipitation (+=dw) [kg/m2/s] 9
cheapQairStartAB 4
cheapTairStartAB 6
Cheaptracer passive tracer 28
CheaptracerR Relaxation profile for passive tracer 20
CheaptracerR Relaxation profile for passive tracer 0
CheaptracerR0 6
CheaptracerR1 6
cheapTracStartAB 5
check logical to check for undefined values 19
Check 14
CHECK_ANALYLIC_THETA 2
CHECK_BALANCE 2
CHECK_ENERGY_CONSERV 3
CHECK_GETPWHERE 5
CHECK_OVERLAP_FORCING 6
CHECK_PICKUP 2
CHECK_SALINITY_FOR_NEGATIVE_VALUES 3
CHECK_SETTINGS 1
check_sign 4
check_threads Validate multiple thread start up. 0
check_threads Validate multiple thread start up. 0
CHECK_THREADS 5
checkAdvSchArea 7
checkAdvSchHeff 5
checkAdvSchHEFF 2
checkAdvSchSalt 7
checkAdvSchSnow 7
checkIniSalt check for points with identically zero initial salinity 6
checkIniTemp check for points with identically zero initial Pot.Temp. 7
checkPtSuff List of checkpoint file suffices 9
checkRatio1 3
checkRatio2 4
chem_exports 1
chemistry_grid 1
chemistry_vars 1
chemo3 4
chemq 4
chfr fractional area covered by the tile [ib] 64
CHFR 3
chfrstr 68
chi 5
chk1 4
chk2 4
chk3 4
chk4 4
chk5 4
chk6 4
chkFlag 7
chkPtFreq Frequency of rolling check pointing ( s ). 13
CHKSUM_TILED 1
CHL 8
chlat 8
chList 8
chlon 29
chlt 28
ChNo 406
CHNO 319
CHOKE 6
CHPPRM 2
chronos 14
CHS heat exchange coefficient over sea 17
CI2 38
CI3 38
CI4 36
CI5 24
cice 3
cig CITER (1) flag, (2) current, and | 0
cin 3
cInputFe 2
Cinv 11
CJ 18
cj 2
ckind 6
Cl 3
CL 144
cL1 4
CLAND4OCEAN 1
CLAT cos(lat) (2-dim) 10
CLBOTH 3
clboth 1
CLDCLW 9
CLDFLX 3
cldfr_htf 3
cldfrc 4
cldhi 12
cldlow 12
CLDLS 1
cldls 5
cldlsp 11
cldlsp_lw 20
cldlsp_mem 5
cldlsp_sw 20
cldlsplwin 6
cldlspswin 6
cldlw 4
cldlz 13
cldmas 11
cldmid 12
cldmin 6
cldmxo 8
cldnow 11
cldprs 6
cldras 13
cldras_lw 21
cldras_mem 5
cldras_sw 21
cldraslwin 6
cldrasswin 6
CLDSCALE 2
cldsr 5
cldsw 4
cldtmp 6
cldtot 14
cldtot_lw 20
cldtot_sw 20
cldtotlwin 6
cldtotswin 6
cldwat 9
cldwater 13
CLF 10
clf 4
clfrac 1
CLFRAC 5
clh 1
CLH 7
clha 10
clim 10
CLIMATE2TEM 2
climsice 4
climsss 11
climsss0 6
climsss1 6
climsss_exfremo_intercept 5
climsss_exfremo_slope 5
climsss_interpMethod 7
climsss_lat0 7
climsss_lat_inc 7
climsss_lon0 7
climsss_lon_inc 7
climsss_nlat 8
climsss_nlon 7
climsssconst 5
climsssfile 14
climsssmask 5
climsssperiod 10
climsssstartdate 6
climsssstartdate1 5
climsssstartdate2 5
climsssTauRelax 6
climsst 17
climsst0 6
climsst1 6
climsst_exfremo_intercept 5
climsst_exfremo_slope 5
climsst_interpMethod 7
climsst_lat0 7
climsst_lat_inc 7
climsst_lon0 7
climsst_lon_inc 7
climsst_nlat 8
climsst_nlon 7
climsstconst 5
climsstfile 14
climsstmask 5
climsstperiod 10
climsststartdate 6
climsststartdate1 5
climsststartdate2 5
climsstTauRelax 6
climtempfreeze 7
climustr 9
climustr0 4
climustr1 4
climustr_exfremo_intercept 5
climustr_exfremo_slope 5
climustr_interpMethod 7
climustr_lat0 7
climustr_lat_inc 7
climustr_lon0 7
climustr_lon_inc 7
climustr_nlat 8
climustr_nlon 7
climustrconst 5
climustrfile 11
climustrmask 6
climustrperiod 10
climustrstartdate 6
climustrstartdate1 5
climustrstartdate2 5
climustrTauRelax 4
climvstr 9
climvstr0 4
climvstr1 4
climvstr_exfremo_intercept 5
climvstr_exfremo_slope 5
climvstr_interpMethod 7
climvstr_lat0 7
climvstr_lat_inc 7
climvstr_lon0 7
climvstr_lon_inc 7
climvstr_nlat 7
climvstr_nlon 7
climvstrconst 5
climvstrfile 11
climvstrmask 6
climvstrperiod 10
climvstrstartdate 6
climvstrstartdate1 5
climvstrstartdate2 5
climvstrTauRelax 4
clindrag_1 8
clindrag_2 4
cll 3
CLM 3
CLM35 3
CLM4MIT2D 2
CLMAXO 2
CLMO 3
clmo 2
clmt 1
CLMT 2
clmt53 1
CLMT53 2
CLN 4
cln 1
cLoc temporary value for level.1 heat capacity [J/m2/K] 4
CLOC 1
clog1 4
closingRate 8
cloud fraction sky covered in cloud 10
cloud Temp for cloud 0
CLOUD 3
cloud0 6
cloud1 6
CLOUDC 21
CLOUDCtave total cloud cover (fraction) 9
CloudFile 7
cloudn 2
CLOUDN 1
clr 8
clrhi 5
clrlw 5
clrmd 5
CLRO 4
clro 5
CLRSKYDIAG 1
CLSBTH 6
clsbth 4
cltj10 3
CLTOP 9
CLTOPtave normalized pressure at cloud top 9
clwmo 4
cm 6
CM 7
CM1 11
CM2 5
cM2 4
cm3 1
CM3 4
cm4 1
CM4 2
cm5 1
CM5 2
CM6 3
CM7 4
cm8 1
CM8 2
CM8ARG 3
cmask 69
cmass 7
CMASS 6
cMat 2
cmat 4
CMax 2
CMAX 42
cmb2pa 3
CMB2PA 4
cMeanSHIforS 6
cMeanSHIforT 5
cMeanTheta 9
cMeanThetaUVel 5
cMeanThetaVVel 6
cMeanUVel 6
cMeanVVel 6
cmonob 5
cmpbug 2
cname 13
cnt 6
CNVCON 1
cnvprec 3
CO 3
co2 30
CO2 3
co24ocean 3
co24ocnan 6
co2atmos 8
co2bnd 6
co2exp 79
CO2EXPS 2
CO2flx_tave 10
CO2KDIS 2
co2s 4
co2star 4
co3dummy 4
CO3ITER 1
CO3iter 1
CO3ITERmax 1
CO3itermax 2
co3local 3
codt 3
coef 7
coef1 8
coef2 6
coef3 6
COEFF 9
coeff 1
col_x 37
col_y 37
cold 9
coldT 4
color 3
COLUMN 4
colx 54
colx_rev 26
coly 54
coly_rev 26
COMBINE_ENDS 3
combnd 5
comexp 20
COMEXPS 2
COMKDIS 2
comm 69
COMM_GET 12
COMM_MSG 15
COMM_NONE 11
COMM_PUT 15
COMM_STATS Summarise inter-proc and inter-thread communication events. 3
COMM_STATS Summarise inter-proc and inter-thread communication events. 0
COMM_STATS Summarise inter-proc and inter-thread communication events. 0
comma 5
commClose 18
comment Descriptive comment for field 51
comment Descriptive comment for field 0
comment Descriptive comment for field 0
comment Descriptive comment for field 0
comment Descriptive comment for field 0
comment Descriptive comment for field 0
comment Descriptive comment for field 0
comment Descriptive comment for field 0
comment Descriptive comment for field 0
comment Descriptive comment for field 0
comment Descriptive comment for field 0
comment Descriptive comment for field 0
comment Descriptive comment for field 0
comment Descriptive comment for field 0
comment Descriptive comment for field 0
commentCharacter Variable used in column 1 of parameter 4
commentcharacter 2
commFlag 6
commName 11
COMMON 896
common 287
commOpen 18
comp_orig 1
compact Flag to control use of repeat symbol for same valued 14
compact Flag to control use of repeat symbol for same valued 0
compact Flag to control use of repeat symbol for same valued 0
compile 5
COMPILE 5
compiler 5
compind 179
compName 8
component 30
component_List 4
COMPONENT_MODULE 56
component_Name 15
component_num_tiles 8
component_tile_i0 10
component_tile_j0 10
component_tile_nx 11
component_tile_ny 11
COMPRECV_R4 1
COMPRECV_R4TILES 1
COMPRECV_R8 1
COMPRECV_R8TILES 19
COMPSEND_I4VEC 3
COMPSEND_R4 1
COMPSEND_R4TILES 1
COMPSEND_R8 1
COMPSEND_R8TILES 9
computed 7
conam 5
conas 5
conbnd 4
conc1 7
conc2 5
conc3 5
concm 5
concs 7
concv 5
cond_dt_qg 12
cond_dt_tg 12
conexp 23
CONEXPS 2
CONFIG_CHECK Check config and parameter consistency. 2
CONFIG_CHECK Check config and parameter consistency. 0
CONFIG_SUMMARY Provide synopsis of kernel setup. Includes annotated table of kernel parameter settings. 2
CONFIG_SUMMARY Provide synopsis of kernel setup. Includes annotated table of kernel parameter settings. 0
CONFIG_SUMMARY Provide synopsis of kernel setup. Includes annotated table of kernel parameter settings. 0
configuration 4
CONS_EmPmR 3
CONS_Qnet 3
CONSERV_BULKF 7
conservcycle 3
const a constant for each water column 8
CONST 8
constants_init 1
CONSTANTS_INIT 1
constants_mod 2
constim 3
CONTAINS 1
controlaux_apressure_r 1
controlaux_aqh_r 1
controlaux_atemp_r 1
controlaux_atm_mean_r 1
controlaux_evap_r 1
controlaux_gencost_r 1
controlaux_gentim2d_r 1
controlaux_hflux_r 1
controlaux_lwdown_r 1
controlaux_lwflux_r 1
controlaux_obcse_r 1
controlaux_obcsn_r 1
controlaux_obcss_r 1
controlaux_obcsw_r 1
controlaux_precip_r 1
controlaux_runoff_r 1
controlaux_shifwflx_r 1
controlaux_snowprecip_r 1
controlaux_sss_r 1
controlaux_sst_r 1
controlaux_swdown_r 1
controlaux_swflux_r 2
controlaux_ustress_r 1
controlaux_uwind_r 1
controlaux_vstress_r 1
controlaux_vwind_r 1
controlfiles_c 1
CONTROLFILES_CARR 1
CONTROLFILES_CTIM 1
CONTROLFILES_ITIM 1
CONTROLFILES_LTIM 1
CONTROLFILES_RARR 1
CONTROLFILES_RTIM 1
controlparams_r 1
controltimes_i 1
controltimes_r 1
controlvars_admtlm_r 1
controlvars_c 1
controlvars_i 1
controlvars_i_obcse 1
controlvars_i_obcsn 1
controlvars_i_obcss 1
controlvars_i_obcsw 1
controlvars_i_shifwflx 1
controlvars_l 1
controlvars_r 1
controlvars_r_openad 1
controlvec_header_c 1
controlvec_header_i 1
controlvec_header_r 1
conv Temp for Convection Count End points for interpolation 0
conv0 6
conv1 6
conv2d horizontal transport convergence [m^3/s] 12
conv_flag 12
conv_new 6
conv_precip conversion factor for precip: from g/m2/s to kg/m2/s 2
conv_Precip 1
conv_T2theta conversion factor from (absolute) Temp. to Pot.Temp. 7
conv_th2Heat 4
conv_theta2T 10
convadj 3
CONVECT Mix static instability. 0
CONVECT Mix static instability. 0
CONVECT Mix static instability. 0
ConvectCount Convection mixing freq. counter. 8
ConvectCount Convection freq. counter 0
convectCount counter to diagnose where convection occurs 4
ConvectCountTave Average number of convective adjustment event 8
CONVECTIVE_ADJUSTMENT Control static instability mixing. 2
CONVECTIVE_ADJUSTMENT Control static instability mixing. 0
CONVECTIVE_ADJUSTMENT_INI Control static instability mixing Extra time history interactions. 2
CONVECTIVE_WEIGHTS 3
CONVECTIVELY_MIXTRACER 6
convergence 3
ConvertFac 5
convertFW2Salt salinity, used to convert Fresh-Water Flux to Salt Flux 36
convertFW2SaltLoc local copy of convertFW2Salt 5
convertHI2PRECIP 8
convertHI2Q 7
convertPRECIP2HI 8
convertQ2HI 11
ConvFile 10
CONVMF 2
convPrcEvp units conversion factor for Precip & Evap: from AIM units (g/m2/s) to model EmPmR units ( kg/m2/s ) 7
convrt 2
CONVRT 1
coord 2
Coord2longitude 5
coordLine 27
coordsSet can be interms of z, p or r. e.g. delZ or delP or delR for the vertical grid spacing. The following rules apply: All parameters must use the same vertical coordinate system. e.g. delZ and viscAz is legal but delZ and viscAr is an error. Similarly specifying delZ and delP is an error. zCoord..., pCoord..., rCoord... are used to flag when z, p or r are used. coordsSet counts how many vertical coordinate systems have been used to specify variables. coordsSet > 1 is an error. 18
copt 4
copy 5
COPY_AD_UV_OUTP 6
COPY_ADVAR_OUTP 23
copyTo if =T, copy buffer -> model ; if =F: copy buffer <- model 46
copyTo if =T, copy buffer -> model ; if =F: copy buffer <- model 0
copyTo if =T, copy 2-D -> 3-D ; if =F: copy 2-D <- 3-D 0
copyTo if =T, copy 2-D -> 3-D ; if =F: copy 2-D <- 3-D 0
copyTo if =T, copy 2-D -> 3-D ; if =F: copy 2-D <- 3-D 0
copyTo if =T, copy 2-D -> 3-D ; if =F: copy 2-D <- 3-D 0
copyTo flag to indicate tranfer direction. 0
copyTo flag to indicate tranfer direction. 0
copyTo flag to indicate tranfer direction. 0
copyTo flag to indicate tranfer direction. 0
COR_ICE 10
cori Coriolis parameter forced to be finite near the equator 8
coriFac 16
coriol 5
Coriol 1
coriU As for cori, but, at U point 10
coriV As for cori, but, at V point 10
corner 27
cornerMode 4
CORRECTION_STEP Pressure correction to momentum 2
CORRECTION_STEP Pressure correction to momentum 0
CORRECTION_STEP Pressure correction to momentum 0
CORRECTION_STEP Pressure correction to momentum 0
correctly 1
cos2LatG 6
COSA 5
cosFacU 35
CosFacU 2
cosFacV 39
CosFacV 2
cosH 5
COSINEMETH_III 26
cosLat 8
COSlat 16
COSlon 10
cosphi 79
cosPower Power of cosine of latitude to multiply viscosity 7
COST_ACCUMULATE_MEAN 2
COST_ARGO_SALT 2
COST_ARGO_THETA 2
COST_ATLANTIC 2
COST_ATLANTIC_HEAT 2
cost_aux_r 1
COST_AVERAGESFIELDS time-averaged Cost function terms (see pkg/cost) 3
COST_AVERAGESFIELDS time-averaged Cost function terms (see pkg/cost) 0
COST_AVERAGESFIELDS time-averaged Cost function terms (see pkg/cost) 0
COST_AVERAGESFIELDS time-averaged Cost function terms (see pkg/cost) 0
COST_AVERAGESFLAGS 3
COST_AVERAGESGENERIC 20
COST_AVERAGESINIT 2
COST_BOTTOMDRAG 2
COST_BP 2
COST_BP_READ 3
COST_CHECK 2
COST_CTDS 2
COST_CTDSCLIM 1
COST_CTDT 2
COST_CTDTCLIM 1
COST_CURMTR 2
COST_DEPENDENT_INIT 3
COST_DEPTH 1
COST_DIFFKR 2
COST_DRIFT 2
COST_DRIFTER 2
COST_DRIFTW 2
COST_ETAN0 2
COST_FINAL Cost function package. ( see pkg/cost ) 2
COST_FINAL Cost function package. (see pkg/cost) 0
COST_FINAL Cost function package. (see pkg/cost) 0
COST_FINAL_R 1
COST_FINAL_RESTORE 3
COST_FINAL_STORE 3
COST_FORCING 2
COST_FORCING_GEN 19
cost_func1_streamice 5
COST_GEN_TRANSPORT 2
COST_GENCOST_ALL 2
COST_GENCOST_ASSIGNPERIOD 2
COST_GENCOST_BOXMEAN 2
COST_GENCOST_CUSTOMIZE 2
COST_GENCOST_SEAICEV4 2
COST_GENCOST_SSHV4 2
COST_GENCOST_SSTV4 2
COST_GENCTRL 2
COST_GENERIC 6
COST_GEOID 2
COST_HFLUX 3
COST_HYD 2
cost_ice_flag 12
COST_ICE_TEST 2
COST_IES 1
COST_IES_READ 3
COST_INIT Cost function package. ( see pkg/cost ) 0
COST_INIT_VARIA 2
COST_INTERNAL_PARAMS 2
cost_iprec 70
COST_KAPGM 2
COST_KAPREDI 2
COST_MEAN_HEATFLUX 2
COST_MEAN_R 1
COST_MEAN_SALTFLUX 2
cost_nml 2
COST_OBCS 2
COST_OBCS_AGEOS 1
COST_OBCSE 2
COST_OBCSN 2
COST_OBCSS 2
COST_OBCSVOL 2
COST_OBCSW 2
cost_objf 1
cost_param_r 1
COST_PROFILES 2
cost_r 1
COST_READARGOS 1
COST_READARGOT 1
COST_READERS 6
COST_READGEOID 2
COST_READGFO 6
COST_READPARMS Cost function package. see pkg/cost 2
COST_READSCATXFIELDS 2
COST_READSCATYFIELDS 2
COST_READTOPEX 6
COST_READTOPEXMEAN 5
COST_RESTORE_AVERAGESFLAGS 1
COST_SALT 2
COST_SALT0 2
COST_SALT_INI_FIN 2
COST_SCAT 2
COST_SIGMAR 2
COST_SLA_READ 13
COST_SLA_READ_YD 7
COST_SSH 2
COST_SSH_MEAN 3
COST_SSH_NEW 2
COST_SSHV4 2
COST_STATE_FINAL 2
cost_state_final_r 1
COST_STORE_AVERAGESFLAGS 1
cost_surf_streamice 3
COST_TAU_EDDY 2
COST_TEMP 3
COST_TEST 11
cost_test_i 1
COST_THETA 2
COST_THETA0 2
COST_THETA_INI_FIN 2
COST_TILE Cost function package. ( see pkg/cost ) 2
COST_TRACER 4
COST_TRANS_MERID 2
COST_TRANS_ZONAL 2
COST_TRANSPORT 1
COST_USERCOST_ALL 2
COST_UVEL0 2
COST_VECTOR 2
cost_vector_r 1
cost_vel_streamice 3
COST_VVEL0 2
COST_WEIGHTS 3
cost_weights_r 1
COST_XBT 2
cost_yftype 64
costIceEnd 5
costIceEnd1 7
costIceEnd2 6
costIceStart 5
costIceStart1 5
costIceStart2 5
costmean 14
costname 16
costTranspDataFile 8
COSWAT sine/cosine of turning angle 48
COSWIN 20
COSZ 10
cosz 38
cotmp 2
count0 record number for forcing field preceding myTime 97
count1 record number for forcing field following myTime 91
countc 1
counter 7
CountmlN 4
CountmlN_tile 5
CountmlS 4
CountmlS_tile 5
countP 3
countPrtExp counter for printed Export message 6
countPrtImp counter for printed Import message 6
countT 6
countTime fractional integrated time 7
CounttN 4
CounttN_tile 5
CounttS 4
CounttS_tile 5
countTU 1
countTV 6
countU 6
countV 6
CountX number of ocean points in each latitude band 10
COUPLE_MODEL 2
COUPLE_PARM 2
coupler 6
COUPLER 1
coupler_Name 6
couplerFlag 13
COUPRECV_I4VEC 4
COUPRECV_R4 1
COUPRECV_R4TILES 1
COUPRECV_R8 1
COUPRECV_R8TILES 27
COUPSEND_R4 1
COUPSEND_R4TILES 1
COUPSEND_R8 1
COUPSEND_R8TILES 31
COZ1 3
COZ2 3
CP 66
cp 45
CP_INIT 1
cpAir specific heat of air [J/kg/K] 6
cpair 11
cpart 1
cpbg 1
CPBG 3
cpchr 3
CPD 5
CPEN 1
cpen 5
cphi 1
cphm 3
cpIce specific heat of fresh ice [J/kg/K] 23
cpinv 6
CPL_ATM_PAR_I 1
CPL_ATM_PAR_L 1
CPL_ATM_PARAM 2
cpl_atmSendFrq Frequency^-1 for sending data to coupler (s) 8
cpl_atmSendFrq Frequency^-1 for sending data to coupler (s) 0
cpl_atmSendFrq Frequency^-1 for sending data to coupler (s) 0
CPL_CHECK_CPLCONFIG 2
CPL_CHEM 3
cpl_earlyExpImpCall retired; always call coupler early in call sequence 8
cpl_earlyExpImpCall call coupler early in the time stepping call sequence 0
cpl_earlyExpImpCall retired; always call coupler early in call sequence 0
cpl_earlyExpImpCall call coupler early in the time stepping call sequence 0
CPL_EXCH_CONFIGS 3
CPL_EXCH_CONFIGS_LOC 1
CPL_EXPORT_MY_DATA Send coupling fields to coupler 3
CPL_EXPORT_MY_DATA Send coupling fields to coupler 0
CPL_IMPORT_EXTERNAL_DATA Receive coupling fields from coupler 3
CPL_IMPORT_EXTERNAL_DATA Receive coupling fields from coupler 0
CPL_INI_VARS 3
CPL_INIT 3
CPL_INIT_FIXED 3
CPL_NEM 2
CPL_OCEANCO2 11
CPL_OCN_PAR_L 1
CPL_OCN_PAR_R 1
CPL_OCN_PARAM 2
cpl_oldPickup restart from an old pickup (= until checkpoint 59h) 6
cpl_oldPickup restart from an old pickup (= until checkpoint 59h) 0
CPL_OUTPUT 3
CPL_PAR_C 1
CPL_PAR_I 1
CPL_READ_PARAMS 2
CPL_READPARMS 3
CPL_RECV_ATM_ATMCONFIG 2
CPL_RECV_ATM_FIELDS 2
CPL_RECV_OCN_FIELDS 4
CPL_RECV_OCN_OCNCONFIG 4
cpl_register Pass attributes to the coupler 0
CPL_REGISTER 3
CPL_REGISTER_ATM 2
CPL_REGISTER_OCN 4
CPL_SEND_ATM_FIELDS 2
CPL_SEND_ATM_OCNCONFIG 2
CPL_SEND_OCN_ATMCONFIG 4
CPL_SEND_OCN_FIELDS 4
cpl_snapshot_mdsio 4
cpl_snapshot_mnc 6
CPL_TAVE_VARS 1
cpl_taveFreq Frequency^-1 for time-Aver. output (s) 8
cpl_taveFreq Frequency^-1 for time-Aver. output (s) 0
CPL_TEM 12
CPL_timeAve Cumulated time [s] 22
cpl_timeave_mdsio 6
cpl_timeave_mnc 8
CPL_WRITE_PICKUP 3
cplCompName 7
CPLR_BUFFERS 1
CPLR_COMP_LIST 1
CPLR_COMPONENTS 1
CPLR_COUPLER 1
CPLR_IDENT 1
cplSendFrq_iter send data to coupler every cplSendFrq iter 17
cplTimeFraction 46
cpoel 6
cpog 4
CPOG 1
CPV 3
cpWater specific heat of water [J/kg/K] 10
cpwater 2
cpwv specific heat of water vapour [J/kg/K] 0
cqe 7
cquadrag_1 4
cquadrag_2 3
Cr slope ratio 60
Cr slope ratio 0
Cr slope ratio 0
Cr slope ratio 0
CR2 64
CR3 46
CR4 24
CR5 12
crain_ratio 2
CRAY 15
crif2 9
crifro 7
CriterionType 8
crtmsf 3
CRTMSF 2
crystal 10
Cs 3
cs 4
csAlb 12
csAlbNIR 12
Csat 6
csdLon 4
cSep 5
csf 6
csha 11
csi 8
csLat sin(Lat) & cos(Lat) (2-dim) 5
csLon 9
csm 22
csmm 6
CSOIL 13
CSOIL0 3
Cspd 5
CSR1 4
CSR2 4
cstanton_ n = 1,2 coefficients used to evaluate 0
cstanton_1 9
cstanton_2 9
cStantonS coefficients used to evaluate Stanton number (for 7
cStantonU 7
cstar 5
cswmo 5
csystemtime 2
ct 113
Ct 3
CT 7
Ct10 3
CTDAY 6
ctds_errfile 2
ctdsclimfile 5
ctdsfile 7
ctdsobs 7
ctdt_errfile 2
ctdtclimfile 5
ctdtfile 7
ctdtobs 7
CTEI 3
cti 3
ctice 16
CTIN 2
ctmp 6
ctmt 21
CTOA 5
ctocn 16
CTRL_ADMTLM 1
CTRL_BOUND_2D 2
CTRL_BOUND_3D 2
CTRL_CHECK 2
ctrl_cost_weights_obcse 1
ctrl_cost_weights_obcsn 1
ctrl_cost_weights_obcss 1
ctrl_cost_weights_obcsw 1
CTRL_DELZNORM 3
CTRL_DEPTH_INI 2
ctrl_dummy 1
ctrl_dummy_arr 1
CTRL_FIELDS_BOTTOMDRAG 1
CTRL_FIELDS_KAPGM 1
CTRL_FIELDS_KAPREDI 1
CTRL_GET_GEN 27
CTRL_GET_GEN_REC 6
CTRL_GETOBCSE 2
CTRL_GETOBCSN 2
CTRL_GETOBCSS 2
CTRL_GETOBCSW 2
CTRL_GETREC 1
CTRL_HFACC_INI 1
CTRL_INIT Control vector support package. see pkg/ctrl 4
CTRL_INIT_CTRLVAR 61
CTRL_INIT_OBCS_VARIABLES 2
CTRL_INIT_REC 26
CTRL_INIT_VARIABLES 2
CTRL_INIT_WET 2
CTRL_MAP_FORCING Control vector support package. ( see pkg/ctrl ) 2
CTRL_MAP_GENTIM2D 4
CTRL_MAP_INI Control vector package.( see pkg/ctrl ) 2
CTRL_MAP_INI_ECCO 2
CTRL_MAP_INI_GEN2D 5
CTRL_MAP_INI_GEN3D 10
CTRL_MAP_INI_GENARR 10
CTRL_MASK_SET_XZ 3
CTRL_MASK_SET_YZ 3
CTRL_NML 1
ctrl_nml 3
ctrl_nml_genarr 2
CTRL_PACK Control vector support package. see pkg/ctrl 5
CTRL_PACK Control vector support package. see pkg/ctrl 0
CTRL_PACK Control vector support package. see pkg/ctrl 0
CTRL_PACK_PRECISE 20
CTRL_PACKNAMES 1
ctrl_packnames 3
ctrl_param_trend_removal 1
CTRL_READPARMS 2
CTRL_SET_FNAME 164
CTRL_SET_GLOBFLD_XY 3
CTRL_SET_GLOBFLD_XYZ 3
CTRL_SET_GLOBFLD_XZ 3
CTRL_SET_GLOBFLD_YZ 3
CTRL_SET_OLD_MAXCVARS_30 1
CTRL_SET_OLD_MAXCVARS_40 1
CTRL_SET_PACK_XY 50
CTRL_SET_PACK_XYZ 25
CTRL_SET_PACK_XZ 5
CTRL_SET_PACK_YZ 5
CTRL_SET_PREC_32 1
CTRL_SET_UNPACK_XY 50
CTRL_SET_UNPACK_XYZ 25
CTRL_SET_UNPACK_XZ 5
CTRL_SET_UNPACK_YZ 5
CTRL_SMOOTH 3
CTRL_SUMMARY 1
CTRL_SWAPFFIELDS 2
CTRL_SWAPFFIELDS_3D 1
CTRL_SWAPFFIELDS_XZ 1
CTRL_SWAPFFIELDS_YZ 1
CTRL_UNPACK Control vector support package. see pkg/ctrl 3
CTRL_UNPACK Control vector support package. see pkg/ctrl 0
CTRL_UNPACK Control vector support package. see pkg/ctrl 0
CTRL_UNPACK_PRECISE 16
ctrl_weights_atmos_r 1
ctrl_weights_dummy_r 1
ctrl_weights_unit_r 1
ctrlname 20
ctrlprec 76
ctrlSmoothCorrel2D use pkg/smooth correlation operator (incl. smoother) for 2D controls (Weaver, Courtier 01) 27
ctrlSmoothCorrel3D use pkg/smooth correlation operator (incl. smoother) for 3D controls (Weaver, Courtier 01) 23
ctsave 6
CTSAVE 3
cTu tile edges coeff and RHS for u-component 23
cTv tile edges coeff and RHS for v-component 23
cU u-matrix (lower diagonal, main diagonal & upper diagonal) 3
CU 43
cu 1
cubed 1
CUBIC 3
cucld 1
CUCLD 3
CUIN 2
cumFld cumulative array (updated) 26
cumfric 8
CUMULSUM_R8 1
CUMULSUM_Z_TILE_RL 2
cumulWeight 4
cunit 402
cunit2 41
cunit3 41
curLev Cyclic global sum buffer levels. 11
curmtrufile 5
curmtruobs 6
curmtrvfile 5
curmtrvobs 6
currentdate 18
currentmonth 27
currentsecs 6
currentTime current time 5
currentyear 15
curTime 7
cusertime 3
CUSTOMIZATION 1
CUSTOMIZE 4
customized 1
cutoff 24
CUU 25
cV v-matrix (lower diagonal, main diagonal & upper diagonal) 3
CV 38
cv_count 37
cv_did 4
cv_start 37
cvapor_ Coeff to calculate Saturation Specific Humidity 0
cvapor_exp 6
cvapor_exp_ice 6
cvapor_fac 6
cvapor_fac_ice 6
CVDI 6
CVEL_SE 9
CVEL_SN 8
CVEL_SS 8
CVEL_SW 9
CVEL_TE 9
CVEL_TN 8
CVEL_TS 8
CVEL_TW 9
CVEL_UE 9
CVEL_UN 8
CVEL_US 8
CVEL_UW 9
CVEL_VE 9
CVEL_VN 8
CVEL_VS 8
CVEL_VW 9
CVEL_WE 9
CVEL_WN 8
CVEL_WS 8
CVEL_WW 9
cVelTimeScale 2
cvelTimeScale 6
cvname 22
cvprofiles 1
CVQ 7
cvq 3
CVTH 7
cvth 2
cvu 3
CVU 2
CVV 25
cw 9
CW_DIMS 36
CW_MAX_LOC 49
CwatC drag coefficients 10
cwave 4
cwc 8
cwp 7
CYCLE 1
CYCLE_AB_TRACER Cycle time-stepping arrays for tracer field 6
CYCLE_TRACER Move tracers forward in time. 4
CYCLE_TRACER Move tracers forward in time. 0
cycleLength length of the periodic cycle (in s), zero if non-periodic 13
CZEN 58
CZEN2 15
CZENdaily 3
CZENdiurnal 5
czol 16