Symbol	Description	Uses
ubarfile		27
udrifterrfile		5
udriftfile		5
umax		5
umin	minimum wind speed used in bulk-formulae [m/s]	21
uniformLin_PhiSurf	Set to true to use a uniform Bo_surf in the	7
upwindShear	use 1rst order upwind interp. (V.I., vertical advection)	9
upwindVorticity	bias interpolation of vorticity in the Coriolis term	13
Urelaxobcsbound		12
Urelaxobcsinner		12
use3dCoriolis	Turns the 3-D coriolis terms (in Omega.cos Phi) on - off	13
useAbsVorticity	work with f+zeta in Coriolis terms	12
useAIM		27
useAnisotropicViscAGridMax		2
useAreaViscLength	Set to true to use old scaling for viscous	9
useBetaPlaneF	Coriolis parameter set to f0 + beta.y	10
useBulkForce	use surf. fluxes from bulk-forcing external S/R	17
useCDscheme	use CD-scheme to calculate Coriolis terms.	24
useCentralDiff		6
useConstantF	Coriolis parameter set to f0	8
useCoriolis	Flag which turns the coriolis terms on and off.	11
useCoupler		31
useCubedSphereExchange		86
useDiagnostics		110
useEBM		9
useECCO		4
useEMBED_FILES		4
useEnergyConservingCoriolis		6
useExfCheckRange		5
useExfYearlyFields	when set, automatically add extension	10
useFixedCEast		9
useFixedCWest		9
usefizhi		8
useFLT		10
useFluxFormula_AIM	set to T when using AIM flux formula rather	10
useFullLeith	Set to true to use full Leith viscosity(may be unstable	8
useGCHEM		19
useGCMwVel		5
useGGL90		19
useGMRedi		31
useGrdchk		7
usegridalt		4
useHB87stressCoupling	use an intergral over ice and ocean surface	5
useImportFW	True => use the Imported Fresh Water flux fr cpl	10
useImportHFlx	True => use the Imported HeatFlux from couler	8
useImportMxlD	True => use Imported Mix.Layer Detph from coupler	6
useImportSIce	True => use the Imported Sea-Ice mass as ice-loading	12
useImportSLP	True => use the Imported Sea-level Pressure as	12
useImportSSS	True => use the Imported SSS from coupler	6
useImportSST	True => use the Imported SST from coupler	7
useImportTau	True => use the Imported Wind-Stress from couler	7
useImportVsq	True => use the Imported Surf. velocity^2	6
useISOMIPTD		7
useJamartMomAdv	Use wet-point method for V.I. non-linear term	7
useJamartWetPoints	Use wet-point method for Coriolis (Jamart and Ozer, 1986)	9
useKPP		32
useLand		15
useMATRIX		16
useMNC		123
useMY82		18
useMYPACKAGE		13
useNHMTerms	If TRUE use non-hydrostatic metric terms.	12
useOBCS		50
useOBCSbalance		5
useOBCSprescribe		9
useOBCSsponge		9
useOffLine		15
useOldFreezing	use the old version (before checkpoint52a_pre, 2003-11-12)	5
useOPPS		10
useOrlanskiEast		14
useOrlanskiNorth		14
useOrlanskiSouth		14
useOrlanskiWest		14
usePickupBeforeC35		5
usePickupBeforeC54		9
usePP81		19
usePTRACERS		38
useRBCptracers		9
useRBCptrnum		7
useRBCS		10
useRBCsalt		5
useRBCtemp		5
useRealFreshWaterFlux	if True (=Natural BCS), treats P+R-E flux	35
useRunClock		11
useSBO		9
useSEAICE		24
useSETRLSTK		13
useSHAP_FILT		11
useShelfIce		19
useSIGREG		14
useSingleCpuIO	On SGI platforms, option globalFiles is either	16
useSphereF	Coriolis parameter set to 2.omega.sin(phi)	8
useStrainTensionVisc	Set to true to use Strain-Tension viscous terms	6
useThSIce		27
useZONAL_FILT		14
using_ers		5
using_gfo		5
using_topex		6
usingCartesianGrid	If TRUE grid generation will be in a cartesian	14
usingCurvilinearGrid		14
usingCylindricalGrid	If TRUE grid generation will be Cylindrical	11
usingMPI		33
usingSphericalPolarGrid	If TRUE grid generation will be in a	35
ustress_exfremo_intercept		6
ustress_exfremo_slope		6
ustressconst		5
ustressfile		9
ustressperiod		7
ustressstartdate1		8
ustressstartdate2		8
UvelFile		4
uVelInitFile		12
uwind_errfile		10
uwind_exfremo_intercept		6
uwind_exfremo_slope		6
uwindconst		5
uwindFile		10
uwindfile		9
UWindFile		6
uwindperiod		7
uwindstartdate1		7
uwindstartdate2		7