Symbol Description Uses
data_errfile 10
dB_dz 8
debugLevel controls printing of algorithm intermediate results 174
debugMode controls printing of debug msg (sequence of S/R calls). 413
deepAtmosphere deep model (drop the shallow-atmosphere approximation) 10
delP Vertical grid spacing ( Pa ). 5
delR Vertical grid spacing ( units of r ). 32
delRc Vertical grid spacing between cell centers (r unit). 13
delRcFile File containing vertical grid spacing delRc (1.D array) 9
delRFile File containing vertical grid spacing delR (1.D array) 9
deltaT time-step 117
deltaTClock Timestep used as model clock . This determines the 259
deltaTFreeSurf Timestep for free-surface equation ( s ) 38
deltaTMom Timestep for momemtum equations ( s ) 78
deltaToffline 9
deltaTrbcs time step used to compute iteration numbers for singleTimeFiles 5
deltaTtracer Timestep for tracer equations ( s ) 22
delX Separation between cell faces (m) or (deg), depending 23
delXFile File containing X-spacing grid definition (1.D array) 9
delY 27
delYFile File containing Y-spacing grid definition (1.D array) 9
delZ Vertical grid spacing ( m ). 10
delZexp 9
dhSnowLin half slope of linear distribution of snow thickness within 8
diag_mnc 16
diag_pickup_read 9
diag_pickup_read_mnc 8
diag_pickup_write 8
diag_pickup_write_mnc 8
DIAG_STATIS_PARMS 2
diagCG_maxIters max number of iterations in diag_cg2d solver 6
diagCG_pcOffDFac diag_cg2d preconditioner off-diagonal factor 7
diagCG_prtResFrq frequency for printing residual in CG iterations 5
diagCG_resTarget residual target for diag_cg2d solver (no units) 8
diagFreq Frequency with which model writes diagnostic output 23
diagMdsDir directory where diagnostics will be written when using mds 18
diagMdsDirCreate system call to mkdir to create diagMdsDir 6
DIAGNOSTICS_LIST 1
diagSt_mnc 10
diagSt_regMaskFile 11
DIC_atmospFile file name of atmospheric pressure 9
DIC_chlaFile file name of chlorophyll climatology 8
DIC_FORCING 2
DIC_forcingCycle periodic forcing parameter specific for dic (seconds) 7
DIC_forcingPeriod periodic forcing parameter specific for dic (seconds) 6
DIC_iceFile file name of seaice fraction 9
dic_int1 17
dic_int2 6
dic_int3 9
dic_int4 9
DIC_ironFile file name of aeolian iron flux 9
DIC_parFile file name of photosynthetically available radiation (PAR) 9
dic_pCO2 Atmospheric pCO2 to be rad in data.dic 11
DIC_silicaFile file name of surface silica 13
DIC_windFile file name of wind speeds 9
DIFF1 parameter used in advect.F 13
diffK4S Biharmonic diffusion coeff. for mixing of 8
diffK4T Biharmonic diffusion coeff. for mixing of 7
diffKhS Laplacian diffusion coeff. for mixing of 8
diffKhT Laplacian diffusion coeff. for mixing of 7
diffKpS Laplacian diffusion coeff. for mixing of salt vertically ( Pa^2/s ) 5
diffKpT Laplacian diffusion coeff. for mixing of heat vertically ( Pa^2/s ) 5
diffKr4S vertical profile of Biharmonic diffusion coeff. 8
diffKr4T vertical profile of Biharmonic diffusion coeff. 8
diffkr_errfile 8
diffKrBL79deep T/S deep diffusivity (m^2/s) Bryan and Lewis, 1979 7
diffKrBL79Ho depth offset for arctan fn (m) Bryan and Lewis, 1979 7
diffKrBL79scl depth scale for arctan fn (m) Bryan and Lewis, 1979 7
diffKrBL79surf T/S surface diffusivity (m^2/s) Bryan and Lewis, 1979 8
diffKrBLEQdeep same as diffKrBL79deep but at Equator 7
diffKrBLEQHo same as diffKrBL79Ho but at Equator 7
diffKrBLEQscl same as diffKrBL79scl but at Equator 7
diffKrBLEQsurf same as diffKrBL79surf but at Equator 8
diffKrFile File containing 3D specification of vertical diffusivity 8
diffKrNrS vertical profile of Laplacian diffusion coeff. 30
diffKrNrT vertical profile of Laplacian diffusion coeff. 10
diffKrS 12
diffKrT 11
diffKsnow thermal conductivity of snow (W/m/K) 6
diffKzS Laplacian diffusion coeff. for mixing of salt vertically ( m^2/s ) 5
diffKzT Laplacian diffusion coeff. for mixing of heat vertically ( m^2/s ) 5
difm0 6
difmcon 6
difs0 6
difscon 6
dift0 6
diftcon 6
dimensions 3
dimsFacets facet pair of dimensions (n1x,n1y,n2x,n2y ...) 6
do_virtual 5
doAB_onGtGs if the Adams-Bashforth time stepping is used, always 7
doAdmtlmBypassAD 6
doInitXX at iter 0 only, set ctrls to 0 and write to xx*000.data 9
doMainPack pack adxx*data files into ecco_cost_* file (usually for optim.x) 8
doMainUnpack unpack ecco_ctrl_* file (usually from optim.x) into xx_*data files 9
doPackDiag output diag_pack*/diag_unpack* files during ctrl_pack/ctrl_unpack 38
DOPfraction fraction of new production going to DOP 13
doResetHFactors Do reset thickness factors @ beginning of each time-step 8
doSinglePrecTapelev reduce precision of ad tape files to float32 (only used in pkg/autodiff ...) 8
doZscalePack 8
doZscaleUnpack 6
dQdTFile 3
DRHLSC 6
dRhoSmall parameter for mixed-layer diagnostic 7
dsfmax 6
dsolmn Solar variation at Northern boundary 4
dsolms Solar variation at Southern boundary 4
dtatm 14
dtcouple 18
DTHETA Potential temp. gradient for stability correction 31
dtocn 12
dTstab potential temp. increment for stability function derivative 26
dTtracerLev Timestep for tracer equations ( s ), function of level k 84
dumpAdByRec 101
dumpAdVarExch control ad-variables exchange before dumping output 17
dumpAtLast always write time-ave (freq>0) diagnostics at the end of the run 9
dumpFreq Frequency with which model state is written to 29
dumpInitAndLast dumps model state to files at Initial (nIter0) Target residual for cg2d solver; no unit (RHS normalisation) Target residual for cg2d solver; W unit (No RHS normalisation) Target residual for cg3d solver. 13
DWNSLP_drFlow 6
DWNSLP_PARM01 2
DWNSLP_rec_mu reciprol friction parameter (unit = time scale [s]) 6
DWNSLP_slope fixed slope (=0 => use the local slope) 8
dxSpacing Default spacing in X and Y. Units are that of coordinate system i.e. cartesian => metres s. polar => degrees 6
dySpacing Default spacing in X and Y. Units are that of coordinate system i.e. cartesian => metres s. polar => degrees 6