Symbol	Description	Uses
p0	surface pressure in mb	47
Pa2Atm	Conversion factor for atmospheric pressure pLoad	10
PACKAGES		2
parfrac	fraction of Qsw avail for photosynthesis	13
PARM01		2
PARM01_ATM2D		2
PARM02		2
PARM02_ATM2D		2
PARM03		2
PARM03_ATM2D		2
PARM04		2
PARM04_ATM2D		2
PARM05		2
PARM05_ATM2D		2
Pc_0	Maximum phytoplankton carbon-specific growth rate at 0C	5
Pc_0_diaz	Maximum diazotroph carbon-specific growth rate at 0C	5
pCellMix_delR	thickness criteria for too thin partial-cell	13
pCellMix_diffKr	vertical diffusivity for too thin partial-cell	7
pCellMix_maxFac	maximum enhanced mixing factor for thin partial-cell	11
pCellMix_select	select option to enhance mixing near surface & bottom	15
pCellMix_viscAr	vertical viscosity for too thin partial-cell	9
pChkPtFreq	Frequency of permanent check pointing ( s ).	13
periodicExternalForcing	Set true if forcing is time-dependant	11
periodicExternalForcing_cheap		5
permil	set carbon mol/m3 <---> mol/kg conversion factor	61
PETSC_PRECOND_TYPE		6
PETSC_SOLVER_TYPE		5
phepsi		26
phi_DOM	Fraction of non-sinking production to DOM	5
phi_dvm		7
phi_lg	Fraction of large phytoplankton biomass converted to detritus	5
phi_sm	Fraction of small phytoplankton biomass converted to detritus	5
phiEuler	Euler angle, rotation about original z-axis	7
phiMin	unfortunate variable name ; replaced by ygOrigin	4
pickup_read_mnc	use mnc to read pickups	16
pickup_write_mnc	use mnc to write pickups	17
pickupStrictlyMatch	check and stop if pickup-file do not stricly match	40
pickupSuff	force to start from pickup files (even if nIter0=0)	75
pivotal	Pivotal phytoplankton biomass	7
ploadFile		1
plotLevel	controls printing of field maps ; higher -> more flds	23
PlumeMethod		9
PlumeRadius		8
postSolvTempIter	select flux calculation after surf. temp solver	10
PP81_PARM01		2
PPalpha		8
PPdiffMin		5
PPdumpFreq		5
PPMixingMaps		2
PPnRi		7
PPnu0		6
PPtaveFreq		6
PPviscMax		7
PPviscMin		5
PPwriteState		5
precip_errfile		8
precip_exfremo_intercept		5
precip_exfremo_slope		5
precip_interpMethod		8
precip_lat0		7
precip_lat_inc		7
precip_lon0		7
precip_lon_inc		8
precip_nlat		8
precip_nlon		8
precipconst		5
precipFile		6
precipfile		12
precipperiod		8
precipRepCycle		6
precipstartdate1		5
precipstartdate2		5
precipStartTime		7
preDefTopol	pre-defined Topology selector: = 0 : topology defined from processing data.exch2 ; = 1 : simple, single facet topology; = 2 : customized topology (w2_set_myown_facets) = 3 : 6-face Cube (3 face-dims: nRed, nGreen, nBlue).	15
printMapIncludesZeros	Flag that controls whether character constant	7
printResidualFreq	Frequency for printing residual in CG iterations	19
profiles_nml		2
profilesDir		22
profilesfiles		17
psbarfile		12
psiEuler	Euler angle, rotation about new z-axis	7
psim_fac	coef used in turbulent fluxes calculation [-]	11
PSMIN		8
pSurfInitFile		8
PtoN_max	Maximum P:N uptake ratio	5
PtoN_min	Minimum P:N uptake ratio	6
PTRACERS_addSrelax2EmP	add Salt relaxation to EmP	9
PTRACERS_advScheme		25
PTRACERS_diffK4		6
PTRACERS_diffKh		6
PTRACERS_diffKr		5
PTRACERS_diffKrNr		9
PTRACERS_doAB_onGpTr	if Adams-Bashforth time stepping is used, apply	6
PTRACERS_dumpFreq		9
PTRACERS_EvPrRn	tracer concentration in Rain, Evap & RunOff	39
PTRACERS_ImplVertAdv	use Implicit Vertical Advection for this tracer	11
PTRACERS_initialFile		6
PTRACERS_Iter0	timestep number when tracers are initialized	22
PTRACERS_linFSConserve	apply mean Free-Surf source/sink at surface	7
PTRACERS_long_names		9
PTRACERS_monitor_mnc		12
PTRACERS_monitorFreq		9
PTRACERS_names		22
PTRACERS_numInUse	number of tracers to use	108
PTRACERS_PARM01		2
PTRACERS_pickup_read_mnc		12
PTRACERS_pickup_write_mnc		12
PTRACERS_ref	vertical profile for passive tracers, in	12
PTRACERS_resetFreq	Frequency (s) to reset ptracers to original val	6
PTRACERS_resetPhase	Phase (s) to reset ptracers	5
PTRACERS_snapshot_mnc		11
PTRACERS_startStepFwd	time to start stepping forward this tracer	7
PTRACERS_taveFreq	Frequency with which time-averaged PTRACERS	12
PTRACERS_timeave_mnc		12
PTRACERS_units		10
PTRACERS_useDWNSLP	true if Down-Sloping flow applies to pTracer n	7
PTRACERS_useGMRedi	true if GM-Redi applies to pTracer n	10
PTRACERS_useKPP	true if KPP applies to pTracer n	8
PTRACERS_useRecords	snap-shot output: put all pTracers in one file	7