Symbol Description Uses
S_winton Winton salinity of ice [g/kg] 6
SadournyCoriolis for backward compatibility 4
salt0errfile 8
salt_addMass salinity of addMass array 16
salt_EvPrRn salinity of Rain & Evap. 24
SALT_PLUME_PARM01 2
salt_useDWNSLP true if Down-Sloping flow applies to salinity 6
saltAdvection Flag which turns advection of salinity on and off. 14
saltAdvScheme Salt. Horiz.advection scheme selector 26
saltClimFile File containing surface salt climataology used 15
saltDiffusion diffusion of salinity on/off (flag not used) 4
salterrfile 11
SaltFile 3
saltFluxFile File containing surface salt flux 14
saltflx_exfremo_intercept 5
saltflx_exfremo_slope 5
saltflx_interpMethod 8
saltflx_lat0 7
saltflx_lat_inc 7
saltflx_lon0 7
saltflx_lon_inc 8
saltflx_nlat 8
saltflx_nlon 8
saltflxconst 5
saltflxfile 12
saltflxperiod 8
saltflxRepCycle 6
saltflxstartdate1 5
saltflxstartdate2 5
saltflxStartTime 7
saltForcing Flag which turns external forcing of salinity on/off 12
saltIce salinity of ice [g/kg] 11
saltImplVertAdv Turns on implicit vertical advection for Salinity 14
SaltPlumeCriterion 11
SaltPlumeSouthernOcean 6
saltQsFac reduction of sat. vapor pressure over salty water 6
saltRelaxFile 9
saltsat reduction of saturation vapor pressure over salt water 7
saltStepping Turns salinity equation time-stepping on/off 21
saltVertAdvScheme Salt. Vert. Advection scheme selector 14
sbarfile 20
sBeta Linear EOS haline contraction coefficient. 12
sbo_monFreq SBO monitor frequency (s) 5
SBO_PARM01 2
sbo_taveFreq 4
scale_runoff 5
scalname 6
scatperiod 6
scatstartdate1 8
scatstartdate2 8
scatx_errfile 8
scatxdatfile 8
scaty_errfile 8
scatydatfile 8
SDALB 8
sdatfile 10
SEAICE_2ndOrderBC apply 2nd order no slip boundary conditions (works 11
SEAICE_abEps 4
SEAICE_ageTracer use SItracer to trace the age of ice 5
SEAICE_airTurnAngle turning angles of air-ice interfacial stress 11
SEAICE_area_floor usually set to 1x10^-5. Specifies a minimun 11
SEAICE_area_max usually set to 1. Seeting areaMax below 1 specifies 10
SEAICE_area_reg usually set to 1x10^-5. Specifies a minimun 27
SEAICE_areaGainFormula selects formula for ice cover gain from open 1=from growth by ATM 2=from predicted growth by ATM 9
SEAICE_areaLossFormula selects formula for ice cover loss from melt 1=from all but only melt conributions by ATM and OCN 2=from net melt-growth>0 by ATM and OCN 3=from predicted melt by ATM 10
SEAICE_availHeatFrac 11
SEAICE_availHeatFracFrz 5
SEAICE_availHeatTaper 6
SEAICE_cBasalStar 8
SEAICE_cf ratio of total energy sinks to gravitational sink 6
SEAICE_clamp_salt 5
SEAICE_clamp_theta 5
SEAICE_clipVelocities clip velocities to +/- 40cm/s 8
SEAICE_cpAir specific heat of air (J/kg/K) 8
SEAICE_cStar sea-ice strength paramter C* (def: 20) 10
SEAICE_cutoff_area 5
SEAICE_cutoff_heff 5
SEAICE_dalton Dalton number (= sensible heat transfer coefficient) 9
SEAICE_deltaMin small number used to reduce singularities of Delta 12
SEAICE_deltaTdyn Seaice timestep for dynamic solver (s) 30
SEAICE_deltaTevp Seaice timestep for EVP solver (s) 16
SEAICE_deltaTtherm Seaice timestep for thermodynamic equations (s) 92
SEAICE_doOpenWaterGrowth use open water heat flux directly to grow ice 8
SEAICE_doOpenWaterMelt use open water heat flux directly to melt ice 7
SEAICE_drag air-ice drag coefficient 10
SEAICE_drag_south Southern Ocean SEAICE_drag 11
SEAICE_dryIceAlb winter albedo 7
SEAICE_dryIceAlb_south Southern Ocean SEAICE_dryIceAlb 8
SEAICE_drySnowAlb dry snow albedo 7
SEAICE_drySnowAlb_south Southern Ocean SEAICE_drySnowAlb 8
SEAICE_dTempFrz_dS tempFrz = SEAICE_tempFrz0 + salt*SEAICE_dTempFrz_dS 9
SEAICE_dump_mnc write snap-shot output using MNC 8
SEAICE_dumpFreq SEAICE dump frequency. (s) 7
SEAICE_eccen sea-ice eccentricity of the elliptical yield curve 11
SEAICE_elasticParm parameter that sets relaxation timescale 7
SEAICE_emissivity longwave ocean-surface emissivity (-) 12
SEAICE_EPS small number 21
SEAICE_EPS_SQ small number square 16
SEAICE_evpAlpha dimensionless parameter 2*evpTauRelax/deltaTevp 21
SEAICE_evpBeta dimensionless parameter deltaTdyn/deltaTevp 16
SEAICE_evpDampC evp damping constant (Hunke,JCP,2001) (kg/m^2) 8
SEAICE_evpTauRelax relaxation timescale tau (s) 9
SEAICE_frazilFrac Fraction of surface level negative heat content 18
SEAICE_freeze FREEZING TEMP. OF SEA WATER 11
SEAICE_gamma_t 8
SEAICE_gamma_t_frz 6
SEAICE_growMeltByConv grow/melt according to convergence of turbulence 7
SEAICE_hice_reg usually set to 5 cm. Specifies a minimun 11
SEAICE_ice_emiss longwave ice-surface emissivity (-) 8
SEAICE_iceConduct sea-ice conductivity 6
SEAICE_initialHEFF initial sea-ice thickness (m) 6
SEAICE_JFNK_lsIter number of Newton iterations after which the 8
SEAICE_JFNK_tolIter number of Newton iterations after which the 6
SEAICE_JFNKalpha (1,2] parameter for inexact Newton Method (def = 1) 6
SEAICE_JFNKepsilon step size for the FD-gradient in s/r seaice_jacvec 6
SEAICE_JFNKphi [0,1] parameter for inexact Newton Method (def = 1) 6
SEAICE_latentIce 4
SEAICE_latentWater 4
SEAICE_lhEvap latent heat of evaporation for water (J/kg) 12
SEAICE_lhFusion latent heat of fusion for ice and snow (J/kg) 13
SEAICE_LSRrelaxU relaxation parameter for LSR-solver: U/V-component 7
SEAICE_LSRrelaxV 7
SEAICE_maskRHS mask the RHS of the solver where there is no ice 7
SEAICE_mcPheePiston ocean-ice turbulent flux piston velocity (m/s) 15
SEAICE_mcPheeStepFunc use step function (not linear tapering) in 7
SEAICE_mcPheeTaper tapering down of turbulent flux term with ice 12
SEAICE_mon_mnc write monitor to netcdf file 10
SEAICE_monFreq SEAICE monitor frequency. (s) 18
SEAICE_multDim number of ice categories 55
SEAICE_no_slip apply no slip boundary conditions to seaice velocity 9
SEAICE_OLx overlaps for LSR-preconditioner in JFNK solver; 19
SEAICE_OLy 19
SEAICE_PARM01 2
SEAICE_PARM02 2
SEAICE_PARM03 2
SEAICE_PDF prescribed sea-ice distribution within grid box 14
SEAICE_rhoAir density of air (kg/m^3) 16
SEAICE_rhoIce density of sea ice (kg/m^3) 41
SEAICE_rhoSnow density of snow (kg/m^3) 19
SEAICE_salinity 4
SEAICE_salinityTracer use SItracer to exchange and trace ocean 8
SEAICE_salt0 prescribed salinity of seaice (in g/kg). 7
SEAICE_saltFrac salinity of newly formed seaice defined as a 10
SEAICE_sensHeat 4
SEAICE_shortwave ice penetration shortwave radiation factor 6
SEAICE_snow_emiss longwave snow-surface emissivity (-) 8
SEAICE_snowConduct snow conductivity 6
SEAICE_snowThick cutoff snow thickness (for snow-albedo) 6
SEAICE_strength sea-ice strength Pstar 9
SEAICE_tauAreaObsRelax Timescale of relaxation to observed 8
SEAICE_tave_mnc write TimeAverage output using MNC 8
SEAICE_taveFreq SEAICE time-averaging frequency. (s) 9
SEAICE_tempFrz0 sea water freezing point is 9
SEAICE_tensilDepth crtical depth for sea-ice tensile strength (def 0.) 7
SEAICE_tensilFac sea-ice tensile strength factor, values in [0,1] 7
SEAICE_useMultDimSnow use same fixed pdf for snow as for 5
SEAICE_waterAlbedo water albedo 8
SEAICE_waterDrag water-ice drag coefficient * water density 13
SEAICE_waterDrag_south Southern Ocean SEAICE_waterDrag 14
SEAICE_waterTurnAngle and ice-water interfacial stress (in degrees) 21
SEAICE_wetAlbTemp Temp (deg.C) above which wet-albedo values are used 6
SEAICE_wetIceAlb summer albedo 7
SEAICE_wetIceAlb_south Southern Ocean SEAICE_wetIceAlb 8
SEAICE_wetSnowAlb wet snow albedo 7
SEAICE_wetSnowAlb_south Southern Ocean SEAICE_wetSnowAlb 8
SEAICE_zetaMaxFac factor determining the maximum viscosity (s) 10
SEAICE_zetaMin lower bound for viscosity (default = 0) (N s/m^2) 11
SEAICEaddSnowMass in computing seaiceMass, add snow contribution 6
SEAICEadvAge 4
SEAICEadvArea turn on advection of fraction area 17
SEAICEadvHeff turn on advection of effective thickness 16
SEAICEadvSalt turn on advection of salt (does not work with 16
SEAICEadvSchAge 4
SEAICEadvSchArea sets the advection scheme for area 24
SEAICEadvScheme sets the advection scheme for thickness and area 16
SEAICEadvSchHeff sets the advection scheme for effective thickness 21
SEAICEadvSchSalt sets the advection scheme for sea ice salinity 18
SEAICEadvSchSnow sets the advection scheme for snow on sea-ice 18
SEAICEadvSnow turn on advection of snow (does not work with 13
SEAICEaEVPalphaMin lower limit of alpha and beta, regularisation 8
SEAICEaEVPcoeff main coefficent for adaptive EVP (largest 7
SEAICEaEVPcStar multiple of stabilty factor: alpha*beta=cstar*gamma 8
SEAICEapproxLevInAd level of approximation in seaice adjoint 12
SEAICEaStar ice concentration parameter similar to gStar for 6
SEAICEbasalDragK1 7
SEAICEbasalDragK2 if > 0, turns on basal drag 13
SEAICEbasalDragU0 7
SEAICEdiffKhAge 4
SEAICEdiffKhArea sets the diffusivity for area (m^2/s) 20
SEAICEdiffKhHeff sets the diffusivity for effective thickness (m^2/s) 17
SEAICEdiffKhSalt sets the diffusivity for sea ice salinity (m^2/s) 13
SEAICEdiffKhSnow sets the diffusivity for snow on sea-ice (m^2/s) 13
SEAICEetaZmethod determines how shear-viscosity eta is computed at 12
SEAICEgStar maximum ice concentration that participates in ridging 11
SEAICEheatConsFix If true then fix ocn<->seaice advective heat flux. 7
SEAICEhighOrderVorticity momentum advection parameters analogous to 8
SEAICEhStar empirical thickness (ridging parameter) 6
SEAICEkrylovIterMax 4
SEAICElinearIterMax number of allowed linear solver iterations for 17
SEAICEmaxRaft regularization parameter (default=1) 7
SEAICEmomAdvection turn on advection of momentum (default = .false.) 10
SEAICEmuRidging tuning parameter similar to hStar for Lipcomb et al 6
SEAICEnEVPstarSteps number of evp*-steps 11
SEAICEnewtonIterMax 5
SEAICEnonLinIterMax number of allowed non-linear solver iterations 18
SEAICEnonLinTol non-linear tolerance parameter for implicit solvers 6
SEAICEpartFunc =0 use Thorndyke et al (1975) participation function =1 use Lipscomb et al (2007) participation function 7
SEAICEpreconLinIter number linear iterations in preconditioner 9
SEAICEpreconNL_Iter number non-linear iterations in preconditioner 7
SEAICEpresH0 HEFF threshold for ice strength (m) 12
SEAICEpresPow0 HEFF exponent for ice strength below SEAICEpresH0 8
SEAICEpresPow1 HEFF exponent for ice strength above SEAICEpresH0 8
SEAICEpressReplFac interpolator between PRESS0 and regularized PRESS 12
SEAICEredistFunc =0 assume ridged ice is uniformly distributed 11
SEAICErestoreUnderIce restore surface T/S also underneath ice 6
SEAICEridgingIterMax maximum number of ridging iterations 7
SEAICEscaleSurfStress if TRUE, scale ice-ocean and ice-atmosphere 16
SEAICEselectKEscheme momentum advection parameters analogous 7
SEAICEselectVortScheme to selectKEscheme and selectVortScheme 8
SEAICEshearParm <=1 reduces amount of energy lost to ridge building 6
SEAICEsimpleRidging use Hibler(1979) ridging (default=.true.) 6
SEAICEsnowFracRidge fraction of snow that remains on ridged 8
seaiceSpongeThickness number grid points that make up the sponge layer (def=0) 56
SEAICEstressFactor factor by which ice affects wind stress (default=1) 11
SEAICEturbFluxFormula 4
SEAICEupwindVorticity highOrderVorticity, upwindVorticity, 8
SEAICEuseAB2 4
SEAICEuseAbsVorticity useAbsVorticity, useJamartMomAdv for vector 5
SEAICEuseBDF2 use 2nd-order backward difference approach 13
SEAICEuseDYNAMICS If false, do not use dynamics; 19
SEAICEuseDYNAMICSswitchInAd switch on/off seaice Dyn in adjoint mode (def=F) 11
SEAICEuseEVPpickup Set to false in order to start EVP solver with 6
SEAICEuseEVPrev If true use revisited elastic viscous plastic 9
SEAICEuseEVPstar If true use modified elastic viscous plastic 11
SEAICEuseFlooding turn on scheme to convert submerged snow into ice 6
SEAICEuseFluxForm use flux form for advection and diffusion 7
SEAICEuseFREEDRIFT If True use free drift velocity instead of EVP 18
SEAICEuseFREEDRIFTswitchInAd switch on/off Free-Drift in adjoint mode (def=F) 11
SEAICEuseIMEX use IMplicit/EXplicit scheme with JFNK 7
SEAICEuseJamartMomAdv invariant momentum in the ocean 7
SEAICEuseJFNK If true, use Jacobi-free Newton-Krylov solver 20
SEAICEuseKrylov If true, use matrix-free Krylov solver with Picard 15
SEAICEuseLinRemapITD use linear remapping (Lipscomb et al. 2001) 6
SEAICEuseMetricTerms use metric terms for dynamics solver 9
SEAICEuseMultiTileSolver in LSR, use full domain tri-diagonal solver 7
SEAICEusePicardAsPrecon If true, allow SEAICEuseLSR = .TRUE. as a 13
SEAICEuseStrImpCpl If true use strongly implicit coupling formulation 8
SEAICEuseTEM to use truncated ellipse method (see Geiger et al. 8
SEAICEuseTilt If true then include surface tilt term in dynamics 5
SEAICEwriteState If true, write sea ice state to file; 6
seaLev_Z the reference height of sea-level (usually zero) 12
SEGRAD 6
select_rStar option related to r* vertical coordinate 74
select_ZenAlbedo switch to different methods to compute albedo (direct part) 0 just use exf_albedo 1 use daily mean albedo from exf_zenithangle_table.F 2 use daily mean albedo computed as in pkg/aim_v23 3 use daily variable albedo 18
selectAddFluid option to add mass source/sink of fluid in the interior 37
selectBotDragQuadr quadratic bottom drag discretisation option: 32
selectCoriMap select setting of Coriolis parameter map: 20
selectFindRoSurf select the way surf. ref. pressure (=Ro_surf) is 13
selectImplicitDrag select Implicit treatment of bottom/top drag 24
selectKEscheme Kinetic Energy scheme selector (Vector Inv.) 12
selectNHfreeSurf option for Non-Hydrostatic (free-)Surface formulation: 24
selectP_inEOS_Zc select which pressure to use in EOS (for z-coords) 28
selectSigmaCoord option related to sigma vertical coordinate 50
selectVortScheme Scheme selector for Vorticity term (Vector Inv.) 48
set_regMask region-mask set-index that define the region n 5
sflux_errfile 8
sflux_exfremo_intercept 6
sflux_exfremo_slope 6
sflux_interpMethod 8
sflux_lat0 7
sflux_lat_inc 7
sflux_lon0 7
sflux_lon_inc 8
sflux_nlat 8
sflux_nlon 8
sfluxconst 5
sfluxfile 13
SFluxFile 11
sfluxmeanbarfile 11
sfluxperiod 8
sfluxRepCycle 6
sfluxstartdate1 5
sfluxstartdate2 5
sfluxStartTime 7
SGRunOff_inscal 4
SGRunOff_remov_intercept 4
SGRunOff_remov_slope 4
SGRunOffconst 4
SGRunOffFile 5
SGRunOffperiod 5
SGRunOffstartdate1 5
SGRunOffstartdate2 5
SGRunOffStartTime 5
Shap_alwaysExchTr always call exch(Tracer) nShapTr times 9
Shap_alwaysExchUV always call exch(U,V) nShapUV times 10
Shap_diagFreq Frequency^-1 for diagnostic output (s) 8
shap_filt_TrStagg if using a Stagger time-step, filter T,S before 5
shap_filt_uvStar filter applied to u*,v* (before SOLVE_FOR_P) 8
Shap_funct define which Shapiro Filter function is used 44
Shap_noSlip No-slip parameter (=0 free sleep ; =1 No-slip) 8
SHAP_PARM01 2
Shap_TrLength Length scale for tracer filter 9
Shap_Trtau Time scale for tracer filter 11
Shap_uvLength Length scale for momentum filter 11
Shap_uvtau Time scale for momentum filter 22
shelf_edge_pos 8
shelf_flat_width 5
shelf_max_draft 5
shelf_min_draft 7
shelf_slope_scale 6
SHELFICE_dump_mnc use netcdf for snapshot output 8
SHELFICE_dumpFreq analoguous to dumpFreq (= default) 6
SHELFICE_oldCalcUStar use old uStar averaging expression 7
SHELFICE_PARM01 2
SHELFICE_tave_mnc use netcdf for time-averaged output 8
SHELFICE_taveFreq analoguous to taveFreq (= default) 8
SHELFICEadvDiffHeatFlux use advective-diffusive heat flux into the 6
SHELFICEboundaryLayer turn on vertical merging of cells to for a 9
SHELFICEconserve use conservative form of H&O-thermodynamics 8
SHELFICEDragLinear linear drag at bottom shelfice (1/s) 10
SHELFICEDragQuadratic quadratic drag at bottom shelfice (default 14
SHELFICEDynMassOnly step ice mass ONLY with Shelficemassdyntendency 5
shelfIceFile File containing the topography of the shelfice draught 4
SHELFICEHeatCapacity_Cp heat capacity of ice shelf (def: 2000 J/K/kg) 4
SHELFICEheatTransCoeff constant heat transfer coefficient that 9
SHELFICEkappa 7
SHELFICElatentHeat latent heat of fusion (def: 334000 J/kg) 12
SHELFICEloadAnomalyFile name of shelfice load anomaly file 8
SHELFICEMassDynTendFile file name for other mass tendency 7
SHELFICEmassFile name of shelfice Mass file 8
SHELFICEMassStepping flag to step forward ice shelf mass/thickness 8
SHELFICEsaltTransCoeff constant salinity transfer coefficient that 10
SHELFICEselectDragQuadr 16
SHELFICEthetaSurface 10
SHELFICEtopoFile File containing the topography of the 7
SHELFICETransCoeffTFile 6
SHELFICEuseGammaFrict use velocity dependent exchange coefficients, 12
SHELFICEwriteState enable output 6
shiCdrag quadratic drag coefficient to compute uStar 7
shiKinVisc constant kinetic viscosity used to compute 6
shiPrandtl constant Prandtl (13.8) and Schmidt (2432.0) 6
shiRc ??? (not used, def: 0.2) 5
shiSchmidt constant Prandtl (13.8) and Schmidt (2432.0) 6
shiZetaN ??? (def: 0.052) 7
sideDragFactor side-drag scaling factor (used only if no_slip_sides) 14
sigma_dvm 5
siobEperiod 8
siobErepCycle 7
siobEstartdate1 7
siobEstartdate2 7
siobEstartTime 6
siobNperiod 8
siobNrepCycle 7
siobNstartdate1 7
siobNstartdate2 7
siobNstartTime 6
siobSperiod 8
siobSrepCycle 7
siobSstartdate1 7
siobSstartdate2 7
siobSstartTime 6
siobWperiod 8
siobWrepCycle 7
siobWstartdate1 7
siobWstartdate2 7
siobWstartTime 6
SIsal0 4
SIsalFRAC 3
SItrExpand0 11
SItrFile 6
SItrFromFlood0 10
SItrFromFloodFrac 13
SItrFromOcean0 10
SItrFromOceanFrac 14
SItrMate 22
SItrName 25
SItrNameLong 7
SItrNumInUse 20
SItrUnit 9
SLrelaxobcsbound 8
SLrelaxobcsinner 8
smag3D_coeff Isotropic 3-D Smagorinsky coefficient (-) 7
SMF 6
smooth2D_Lx0 6
smooth2D_Ly0 6
smooth2Dfilter 7
smooth2Dnbt 9
smooth2Dsize 5
smooth2Dtype 8
smooth3D_Lx0 6
smooth3D_Ly0 6
smooth3D_Lz0 6
smooth3Dfilter 7
smooth3Dnbt 9
smooth3DsizeH 5
smooth3DsizeZ 6
smooth3DtypeH 7
smooth3DtypeZ 7
smooth_nml 2
smoothAbsFuncRange 1/2 of interval around zero, for which FORTRAN ABS 14
smrarea_errfile 6
smrareabarfile 12
smrareadatfile 9
smrareaperiod 3
smrareastartdate1 5
smrareastartdate2 5
smrsssbarfile 9
smrsstbarfile 9
sMxL_default default value for salinity in MixLayer [psu] 9
snapshot_mnc 22
snow_emissivity 16
snowAgTime snow aging time scale [s] 6
snowprecip_errfile 8
snowprecip_exfremo_intercept 5
snowprecip_exfremo_slope 5
snowprecip_interpMethod 8
snowprecip_lat0 7
snowprecip_lat_inc 7
snowprecip_lon0 7
snowprecip_lon_inc 8
snowprecip_nlat 8
snowprecip_nlon 8
snowprecipconst 5
snowprecipfile 12
snowprecipperiod 8
snowprecipRepCycle 6
snowprecipstartdate1 5
snowprecipstartdate2 5
snowprecipStartTime 7
SNrelaxobcsbound 8
SNrelaxobcsinner 8
SolarFile 16
SOLC 17
SOLV_MAX_ITERS 4
SOLV_NCHECK iteration interval for LSR-solver convergence test 11
spongeThickness number grid points that make up the sponge layer (def=0) specify Orlanski boundary conditions for northern/ use open boundary computations following Stevens (1990) use phase velocity contribution for open boundary use advective contribution for open boundary 88
SPovershoot 6
SPsalFRAC 24
sRef reference vertical profile for salinity/specific humidity 47
sRefFile File containing reference salinity/spec.humid. sRef (1.D) 9
SrelaxStevens relaxation time scale (in seconds) for T/S-points 6
ssh_errfile 8
sshv4cost_errfactor 7
sshv4cost_errfile 8
sshv4cost_scalefile 6
sssdatfile 9
ssserrfile 9
sssstartdate1 7
sssstartdate2 7
sstbarfile 11
sstdatfile 12
ssterrfile 13
sstExtrapol extrapolation coeff from 1rst 2 levels up to surface 9
sststartdate1 7
sststartdate2 7
STABILITY_THRESHOLD 8
staggerTimeStep enable a Stagger time stepping U,V (& W) then T,S 36
startDate 4
startDate_1 1
startDate_2 1
startFromPickupAB2 with AB-3 code, start from an AB-2 pickup 8
startIceModel =1 : start ice model at nIter0 ; =0 : use pickup files -1 : start from a small pickup (without Mix.Layer) 7
startTime Starting time for this integration ( s ). 145
startYear 7
stat_fields List of statistics output Fields 4
stat_fname 9
stat_freq Frequency (in s) of statistics output 7
stat_phase phase (in s) to write statistics output 5
stat_region List of statistics output Regions 4
stefan Stefan-Boltzmann constant [W/m^2/K^4] 33
stepFwd_oceMxL step forward mixed-layer T & S (slab-ocean) 18
streamice_addl_backstress 12
streamice_adjDump 5
streamice_adot_uniform 5
STREAMICE_ADV_SCHEME 12
STREAMICE_alt_driving_stress 5
STREAMICE_apply_firn_correction 17
streamice_bg_surf_slope_x 11
streamice_bg_surf_slope_y 11
STREAMICE_calve_to_mask 9
streamice_CFL_factor 4
streamice_cg_tol 7
STREAMICE_chkfixedptconvergence 6
STREAMICE_chkresidconvergence 8
streamice_density 103
streamice_density_firn 47
streamice_density_ocean_avg 40
STREAMICE_diagnostic_only 5
STREAMICE_dump_mdsio 7
STREAMICE_dump_mnc 6
streamice_err_norm 14
STREAMICE_EW_periodic 9
streamice_firn_correction 29
streamice_forcing_period 8
STREAMICE_h_ctrl_const_surf 4
streamice_kx_b_init 6
streamice_ky_b_init 5
STREAMICE_lower_cg_tol 5
streamice_max_cg_iter 11
streamice_max_nl_iter 9
streamice_maxcgiter_cpl 5
streamice_maxnliter_cpl 10
STREAMICE_move_front 5
streamice_nonlin_tol 7
streamice_nonlin_tol_adjoint 4
streamice_nonlin_tol_fp 7
STREAMICE_NS_periodic 9
STREAMICE_PARM01 2
STREAMICE_PARM02 2
STREAMICE_PARM03 2
STREAMICE_PARMOAD 2
STREAMICE_PARMPETSC 2
STREAMICE_PARMTRACER 2
STREAMICE_ppm_driving_stress 6
streamice_smooth_gl_width 11
STREAMICE_tave_mdsio 5
STREAMICE_tave_mnc 6
streamice_use_petsc 7
streamice_vel_update 7
streamice_wgt_avthick 4
streamice_wgt_drift 5
streamice_wgt_surf 5
streamice_wgt_tikh 4
streamice_wgt_vel 4
STREAMICEbasalTracConfig 8
STREAMICEbasalTracFile 6
STREAMICEBdotConfig 5
STREAMICEBdotFile 6
STREAMICEBdotTimeDepFile 8
STREAMICEcalveMaskFile 7
STREAMICEcostMaskFile 6
STREAMICEGlenConstConfig 6
STREAMICEGlenConstFile 7
STREAMICEHBCxFile 6
STREAMICEHBCyFile 6
STREAMICEhmaskFile 4
STREAMICEsigcoordFile 4
STREAMICEsigcoordInit 6
STREAMICEthickFile 9
STREAMICEthickInit 8
STREAMICEtopogFile 6
STREAMICETrac2DBCxFile 4
STREAMICETrac2DBCyFile 4
STREAMICETrac2DINITFile 1
STREAMICEuDirichValsFile 6
STREAMICEuFaceBdryFile 6
STREAMICEuFluxTimeDepFile 8
STREAMICEuMassFluxFile 4
STREAMICEuNormalStressFile 6
STREAMICEuNormalTimeDepFile 8
STREAMICEuShearStressFile 6
STREAMICEuShearTimeDepFile 8
STREAMICEvDirichValsFile 6
STREAMICEvelOptimFile 4
STREAMICEvFaceBdryFile 6
STREAMICEvFluxTimeDepFile 6
STREAMICEvMassFluxFile 4
STREAMICEvNormalStressFile 6
STREAMICEvNormalTimeDepFile 8
STREAMICEvShearStressFile 6
STREAMICEvShearTimeDepFile 8
stressReduction reduction factor for wind-stress under sea-ice [0-1] 18
subMeso_Ceff efficiency coefficient of Mixed-Layer Eddies [-] 7
subMeso_invTau inverse of mixing time-scale in sub-meso parameteriz. [s^-1] 7
subMeso_LfMin minimum value for length-scale Lf [m] 6
subMeso_Lmax maximum horizontal grid-scale length [m] 7
surfQfile File containing surface heat flux, excluding SW 4
surfQnetFile File containing surface net heat flux 14
surfQswFile File containing surface shortwave radiation 14
SWCAP 9
swdown_errfile 8
swdown_exfremo_intercept 5
swdown_exfremo_slope 5
swdown_interpMethod 8
swdown_lat0 7
swdown_lat_inc 7
swdown_lon0 7
swdown_lon_inc 8
swdown_nlat 8
swdown_nlon 8
swdownconst 5
swdownfile 17
swdownperiod 10
swdownRepCycle 6
swdownstartdate1 5
swdownstartdate2 5
swdownStartTime 7
swflux_errfile 8
swflux_exfremo_intercept 5
swflux_exfremo_slope 5
swflux_interpMethod 8
swflux_lat0 7
swflux_lat_inc 7
swflux_lon0 7
swflux_lon_inc 8
swflux_nlat 8
swflux_nlon 8
swfluxconst 5
swfluxfile 17
swfluxperiod 8
swfluxRepCycle 6
swfluxstartdate1 5
swfluxstartdate2 5
swfluxStartTime 7
SWWIL 9