Symbol Description Uses
ubarfile 13
udrifterrfile 6
udriftfile 6
uIceFile File containing initial sea-ice U comp. velocity 8
umax 6
umin minimum wind speed used in bulk-formulae [m/s] 23
uniformLin_PhiSurf Set to true to use a uniform Bo_surf in the 7
upwindShear use 1rst order upwind interp. (V.I., vertical advection) 9
upwindVorticity bias interpolation of vorticity in the Coriolis term 23
Urelaxobcsbound 12
Urelaxobcsinner 12
use3dCoriolis Turns the 3-D coriolis terms (in Omega.cos Phi) on - off 13
useAbsVorticity work with f+zeta in Coriolis terms 12
useAIM 36
useAltDeriv 5
useAnisotropicViscAgridMax Changed to be default behavior. Can 4
useAreaViscLength Set to true to use old scaling for viscous lengths, 7
useATM2D 5
useAtm_Phys 29
useAtmWind use wind vector (uwind/vwind) to compute 63
useAUTODIFF 12
useBBL 22
useBetaPlaneF Coriolis coeff = f0 + beta.y (replaced by selectCoriMap=1) 4
useBLING flag to turn on/off BLING pkg 14
useBOLUS 4
useBulkForce use surf. fluxes from bulk-forcing external S/R 20
useCAL 41
useCDscheme use CD-scheme to calculate Coriolis terms. 27
useCentralDiff 6
useCFC flag to turn on/off CFC pkg 11
useCheapAML 18
useCheapTracer use passive tracer option (off by default) 21
useClouds use clouds option (off by default) 13
useConstantF Coriolis coeff set to f0 (replaced by selectCoriMap=0) 4
useCoriolis Flag which turns the coriolis terms on and off. 12
useCoupler use Coupler for a multi-components set-up. 40
useCTRL 30
useCubedSphereExchange use Cubed-Sphere topology domain. 90
useDARWIN flag to turn on/off darwin pkg 18
useDiagnostics 226
useDIC flag to turn on/off DIC pkg 21
useDLongWave use imported downward longwave (off by default) 14
useDOWN_SLOPE 20
useEBM 9
useECCO 17
useEMBED_FILES 7
useEnergyConservingCoriolis 7
useEXF use surf. fluxes from exf external S/R 44
useExfCheckRange check range of input/output field values 6
useExfYearlyFields when set, automatically add extension 67
useExfZenIncoming compute incoming solar radiation along with zenith angle 10
useFixedCEast 9
useFixedCWest 9
useFizhi 9
useFLT 12
useFluxFormula_AIM set to T when using AIM flux formula rather 10
useFluxLimit use flux limiting advection (off by default) 13
useFRAZIL 12
useFreshWaterFlux option to include evap+precip (on by default) 19
useFullLeith Set to true to use full Leith viscosity(may be unstable 8
useGCHEM 19
useGCMwVel 5
useGGL90 27
useGGL90inAdMode 8
useGMRedi 51
useGMRediInAdMode 8
useGrdchk 8
useGridAlt 6
useHB87stressCoupling use an intergral over ice and ocean surface 5
useHibler79IceStrength if true original ice strength parameterization 8
useICEFRONT 17
useIDEMIX 18
useImportCO2 True => use the Imported atmos. CO2 from coupler 7
useImportFice True => use the Imported Seaice fraction (DIC-only) 8
useImportFlxCO2 True => use the Imported air-sea CO2 flux from coupler 7
useImportFW True => use the Imported Fresh Water flux fr cpl 10
useImportHFlx True => use the Imported HeatFlux from couler 8
useImportMxlD True => use Imported Mix.Layer Detph from coupler 6
useImportRunOff True => use the Imported RunOff flux from coupler 6
useImportSIce True => use the Imported Sea-Ice mass as ice-loading 13
useImportSLP True => use the Imported Sea-level Pressure 13
useImportSltPlm True => use the Imported Salt-Plume flux from coupler 7
useImportSSS True => use the Imported SSS from coupler 6
useImportSST True => use the Imported SST from coupler 8
useImportTau True => use the Imported Wind-Stress from couler 7
useImportThSIce True => use the Imported thSIce state var from coupler 17
useImportVsq True => use the Imported Surf. velocity^2 6
useImportWSpd True => use the Imported surf. Wind speed from coupler 7
useISOMIPTD use simple ISOMIP thermodynamics, def: F 9
useJamartMomAdv Use wet-point method for V.I. non-linear term 17
useJamartWetPoints Use wet-point method for Coriolis (Jamart & Ozer 1986) 9
useKL10 17
useKPP 51
useKPPinAdMode 8
useLand 18
useLayers 33
useMATRIX 14
useMaykutSatVapPoly use Maykut Polynomial for saturation vapor pressure 8
useMin4hFacEdges set hFacW,hFacS as minimum of adjacent hFacC factor 7
useMissingValue put MissingValue where mask = 0 (NetCDF output only) 8
useMNC 146
useMY82 20
useMYPACKAGE 25
useNEST_CHILD use Child Nesting interface (pkg/nest_child) 16
useNEST_PARENT use Parent Nesting interface (pkg/nest_parent) 11
useNHMTerms If TRUE use non-hydrostatic metric terms. 12
useOASIS use OASIS-coupler for a multi-components set-up. 12
useOBCS 68
useOBCSYearlyFields when reading Open-Boundary values, assume yearly 21
useObsEmP 5
useObsRunoff 5
useOffLine 23
useOldFreezing use the old version (before checkpoint52a_pre, 2003-11-12) 4
useOPPS 11
useOrlanskiEast 15
useOrlanskiNorth 15
useOrlanskiSouth 15
useOrlanskiWest 15
usePickupBeforeC35 to restart from old-pickup files (generated with code 4
usePickupBeforeC54 start from old-pickup files, generated with code from 10
usePP81 21
usePrecip use imported precipitation (off by default) 10
usePROFILES 18
usePTRACERS 55
usePW79thermodynamics use 0-layer thermodynamics as described in 10
useRBCptracers 3
useRBCpTrNum 7
useRBCS 24
useRBCsalt 8
useRBCtemp 8
useRBCuVel 15
useRBCvVel 15
usercost_datafile 6
usercost_errfile 6
useRealFreshWaterFlux if True (=Natural BCS), treats P+R-E flux 61
useREGRID 10
useRelativeWind use relative wind (off by default) 15
useRunClock 10
useSALT_PLUME 38
useSALT_PLUMEinAdMode 8
useSBO 10
useSEAICE 70
useSEAICEinAdMode 10
useSETRLSTK 6
useSHAP_FILT 11
useShelfIce 36
useSIGREG 8
useSingleCpuInput When useSingleCpuInput is set, EXF_INTERP_READ 7
useSingleCpuIO When useSingleCpuIO is set, MDS_WRITE_FIELD outputs from 28
useSmag3D Use isotropic 3-D Smagorinsky 14
useSMOOTH 29
useSmoothCorrel2DinAdMode 9
useSphereF Coriolis = 2.omega.sin(phi) (replaced by selectCoriMap=2) 4
useSPOIL flag to turn on/off SPOIL pkg 6
useSRCGSolver Set to true to use conjugate gradient 7
useStabilityFct_overIce over sea-ice, compute turbulent transfert 6
useStevensAdvection 5
useStevensEast 16
useStevensNorth 16
useStevensPhaseVel 5
useStevensSouth 16
useStevensWest 16
useStrainTensionVisc Set to true to use Strain-Tension viscous terms 8
useStreamIce 16
useStressOption use stress option (off by default) 18
useThSIce 62
useTimeVarBLH use time varying BL height option (off by default) 8
useZONAL_FILT 15
using_cost_altim 15
using_cost_bp 10
using_cost_scat 10
using_cost_seaice 9
using_cost_sst 15
using_cost_transp 7
using_ers 11
using_gencost 46
using_gfo 11
using_mdt 7
using_topex 4
using_tpj 13
usingCartesianGrid If TRUE grid generation will be in a cartesian 28
usingCurvilinearGrid If TRUE, use a curvilinear grid (to be provided) 42
usingCylindricalGrid If TRUE grid generation will be Cylindrical 22
usingMPI 52
usingSphericalPolarGrid If TRUE grid generation will be in a 41
ustress_exfremo_intercept 5
ustress_exfremo_slope 5
ustress_interpMethod 13
ustress_lat0 8
ustress_lat_inc 8
ustress_lon0 8
ustress_lon_inc 9
ustress_nlat 10
ustress_nlon 9
ustressconst 5
UStressFile 8
ustressfile 19
ustressperiod 11
ustressRepCycle 7
ustressstartdate1 5
ustressstartdate2 5
ustressStartTime 9
uvel0errfile 8
UvelFile 5
uVelInitFile 15
uwind_errfile 8
uwind_exfremo_intercept 5
uwind_exfremo_slope 5
uwind_interpMethod 11
uwind_lat0 8
uwind_lat_inc 8
uwind_lon0 8
uwind_lon_inc 9
uwind_nlat 10
uwind_nlon 9
uwindconst 5
UWindFile 15
uwindfile 15
uwindperiod 11
uwindRepCycle 7
uwindstartdate1 5
uwindstartdate2 5
uwindStartTime 9