Symbol Description Uses
useDynP_inEos_Zc use the dynamical pressure in EOS (with Z-coord.) 19


File Line number Procedure Code
./model/inc/PARAMS.h 377 NO PROCEDURE 
     & usingPCoords, usingZCoords, useDynP_inEos_Zc,
./model/inc/PARAMS.h 422 NO PROCEDURE 
      LOGICAL useDynP_inEos_Zc
./model/src/config_check.F 650 CONFIG_CHECK 
      IF ( momPressureForcing .OR. useDynP_inEos_Zc ) THEN
./model/src/config_check.F 657 CONFIG_CHECK 
      IF ( useDynP_inEos_Zc .AND. .NOT.momStepping ) THEN
./pkg/opps/opps_calc.F 477 OPPS_CALC 
       IF ( useDynP_inEos_Zc ) THEN
./model/src/do_fields_blocking_exchanges.F 87 DO_FIELDS_BLOCKING_EXCHANGES 
      IF ( useDynP_inEos_Zc )
./model/src/ini_pressure.F 81 INI_PRESSURE 
      IF ( useDynP_inEos_Zc ) THEN
./model/src/pressure_for_eos.F 51 PRESSURE_FOR_EOS 
        IF ( useDynP_inEos_Zc ) THEN
./model/src/read_pickup.F 241 READ_PICKUP 
        IF ( useDynP_inEos_Zc ) THEN
./model/src/read_pickup.F 390 READ_PICKUP 
        IF ( useDynP_inEos_Zc ) THEN
./model/src/read_pickup.F 495 READ_PICKUP 
        IF ( useDynP_inEos_Zc ) THEN
./model/src/read_pickup.F 532 READ_PICKUP 
      IF ( useDynP_inEos_Zc )
./model/src/set_parms.F 229 SET_PARMS 
      useDynP_inEos_Zc = ( fluidIsWater .AND. usingZCoords
./model/src/write_pickup.F 268 WRITE_PICKUP 
       IF ( useDynP_inEos_Zc ) THEN
./model/src/write_pickup.F 394 WRITE_PICKUP 
        IF ( useDynP_inEos_Zc ) THEN
./model/src/write_state.F 136 WRITE_STATE 
          IF ( useDynP_inEos_Zc .OR. myIter.NE.nIter0 ) THEN
./model/src/write_state.F 147 WRITE_STATE 
          IF ( useDynP_inEos_Zc .OR. myIter.NE.nIter0 ) THEN
./model/src/write_state.F 194 WRITE_STATE 
          IF ( useDynP_inEos_Zc .OR. myIter.NE.nIter0 ) THEN
./pkg/atm_phys/atm_phys_init_fixed.F 54 ATM_PHYS_INIT_FIXED 
        useDynP_inEos_Zc = .TRUE.